Hi Mike, i hope i can help u i am just a User of coreboot and noo skilled coreboot hacker yet lol. The A10-6800K should work as its the same CPU core/ gen. do not include microcode it makes the rom a brick mode. U have to add a VGA bios if u are using the Internal GPU. i am using a F2A85M rev 1.1 (not pro and not LE, they are quite rare)
Am 2. November 2018 17:01:24 MEZ schrieb Mike Banon <[email protected]>: >Nice report. Do you think A10-6800K CPU would have worked at this >motherboard? Or only A8-6600K is supported? Also, what hardware >revision of this motherboard do you have? (there were F2A85M / --//-- >PRO and some other revisions, so I'm a bit confused) . I am seriously >considering doing a similar build, but would like to get the fastest >available CPU you could install there >On Fri, Nov 2, 2018 at 4:29 AM kinky_nekoboi ><[email protected]> wrote: >> >> something like that happens if u connect anything to a USB2 Port >> >> [ 2600.001601] usb 7-1: new full-speed USB device number 3 using >ohci-pci >> [ 2600.001612] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow >0x00000001c52c2ea8+8 of device mask ffffffff >> [ 2600.001619] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow >0x00000001c52c2ea8+8 of device mask ffffffff >> [ 2600.001624] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow >0x00000001c52c2ea8+8 of device mask ffffffff >> [ 2600.185864] usb 7-1: device descriptor read/64, error -11 >> [ 2600.293659] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow >0x00000001c52c2ea8+8 of device mask ffffffff >> [ 2600.293669] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow >0x00000001c52c2ea8+8 of device mask ffffffff >> [ 2600.293674] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow >0x00000001c52c2ea8+8 of device mask ffffffff >> [ 2600.477668] usb 7-1: device descriptor read/64, error -11 >> [ 2600.585647] usb usb7-port1: attempt power cycle >> [ 2601.090486] usb 7-1: new full-speed USB device number 4 using >ohci-pci >> [ 2601.090494] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow >0x00000001c52c2ea8+8 of device mask ffffffff >> [ 2601.301659] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow >0x00000001c52c2ea8+8 of device mask ffffffff >> [ 2601.509672] usb 7-1: device not accepting address 4, error -11 >> [ 2601.693678] usb 7-1: new full-speed USB device number 5 using >ohci-pci >> [ 2601.693693] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow >0x00000001c52c2ea8+8 of device mask ffffffff >> [ 2601.901677] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow >0x00000001c52c2ea8+8 of device mask ffffffff >> [ 2602.109672] usb 7-1: device not accepting address 5, error -11 >> [ 2602.109723] usb usb7-port1: unable to enumerate USB device >> >> >> Am 02.11.2018 um 02:01 schrieb kinky_nekoboi: >> >> heeey >> >> i am very happy that i have coreboot running now on my desktop >machine... >> >> ADDON-GPU card works now >> >> Nvramcui works >> >> Optionrom execution works. >> >> IOMMU does not work .. debian has to boot with iommu=off. >> >> but KVM virtualsation works somehow. >> >> Suspend does not work. >> >> USB is still extremely buggy ... only the USB3 Ports are useable. >> >> >> here some output >> >> Architektur: x86_64 >> CPU Operationsmodus: 32-bit, 64-bit >> Byte-Reihenfolge: Little Endian >> CPU(s): 4 >> Liste der Online-CPU(s): 0-3 >> Thread(s) pro Kern: 2 >> Kern(e) pro Socket: 2 >> Sockel: 1 >> NUMA-Knoten: 1 >> Anbieterkennung: AuthenticAMD >> Prozessorfamilie: 21 >> Modell: 19 >> Modellname: AMD A8-6600K APU with Radeon(tm) HD >Graphics >> Stepping: 1 >> CPU MHz: 2068.754 >> Maximale Taktfrequenz der CPU: 3900,0000 >> Minimale Taktfrequenz der CPU: 1900,0000 >> BogoMIPS: 7786.16 >> Virtualisierung: AMD-V >> L1d Cache: 16K >> L1i Cache: 64K >> L2 Cache: 2048K >> NUMA-Knoten0 CPU(s): 0-3 >> Markierungen: fpu vme de pse tsc msr pae mce cx8 >apic >> sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall >nx >> mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl >nonstop_tsc >> cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 >sse4_1 >> sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic >> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit >wdt >> lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb cpb >> hw_pstate ssbd vmmcall bmi1 arat npt lbrv svm_lock nrip_save >tsc_scale >> vmcb_clean flushbyasid decodeassists pausefilter pfthreshold >> >> >> 23 entries total: >> >> 0:1st timestamp 13,116 >> 1:start of romstage 13,477 (361) >> 2:before ram initialization 75,515 >(62,038) >> 3:after ram initialization 1,308,025 >(1,232,510) >> 4:end of romstage 1,319,893 >(11,867) >> 8:starting to load ramstage 1,319,966 (73) >> 15:starting LZMA decompress (ignore for x86) 1,319,984 (18) >> 16:finished LZMA decompress (ignore for x86) 1,370,088 >(50,103) >> 9:finished loading ramstage 1,370,357 >(269) >> 10:start of ramstage 1,371,078 >(720) >> 30:device enumeration 1,461,571 >(90,493) >> 40:device configuration 1,470,758 >(9,186) >> 50:device enable 1,501,692 >(30,933) >> 60:device initialization 1,569,453 >(67,761) >> 65:Option ROM initialization 1,769,162 >(199,708) >> 65:Option ROM initialization 1,936,860 >(167,697) >> 70:device setup done 2,011,094 >(74,234) >> 75:cbmem post 2,366,967 >(355,873) >> 80:write tables 2,371,915 >(4,947) >> 85:finalize chips 2,750,289 >(378,374) >> 90:load payload 2,755,411 >(5,122) >> 15:starting LZMA decompress (ignore for x86) 2,797,472 >(42,060) >> 16:finished LZMA decompress (ignore for x86) 2,823,100 >(25,628) >> 99:selfboot jump 2,838,148 >(15,048) >> >> Total Time: 2,825,023 >> >> >> >> >> -- >> coreboot mailing list: [email protected] >> https://mail.coreboot.org/mailman/listinfo/coreboot
-- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
