Hi Jose, Thanks for a quick response
Enabled framebuffer in Config as given in inserted picture and am using uefipayload but not seabios [image: image.png] To add more to this MinnowMax + VGA -> Display is seen BayleyBay + VGA -> Display is not seen Does the FSP-master\FSP-master\BayTrailFspBinPkg\Vbios\vga.dat needs any change? Do you think in the hardware the DDI0, DDI1 pins and clk/data can have an impact and needs to be measured Regards Ranga On Thu, Nov 8, 2018 at 10:16 AM Jose Trujillo <[email protected]> wrote: > Hello Ranga: > > If you are using tianocore as payload you should choose vesa framebuffer > option and text mode in seabios > JT > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Thursday, November 8, 2018 1:08 PM, galla rao <[email protected]> > wrote: > > Hi All, > > Am facing Gfx Enablement failure, i don't see any Video output on my screen > > Config file has below settings > > CONFIG_VGA_BIOS_ID="8086,0f31" > CONFIG_DRIVERS_PS2_KEYBOARD is not set > CONFIG_ONBOARD_VGA_IS_PRIMARY=y > CONFIG_VGA_BIOS=y > CONFIG_UDELAY_IO is not set > CONFIG_DCACHE_RAM_BASE=0xfef00000 > CONFIG_DCACHE_RAM_SIZE=0x4000 > CONFIG_ACPI_SSDTX_NUM=0 > CONFIG_VGA_BIOS_FILE="../intel/cpu/baytrail/vbios/Vga.dat" > CONFIG_PCI_64BIT_PREF_MEM is not set > > > BIOS log specific to Video output onto terminal > > ------------------------ VLV SSA Platform Policy dump Begin --------------- > Graphics Configuration: > GttSize : 2 MB > IgdDvmt50PreAlloc : 2 > PrimaryDisplay : 0 > ApertureSize : 2 > Turbo Enable : 1 > > IGD enabled. > > dGFXBase = 0x7BE00000 > > > Do i need to configure any setting > in \FSP-master\FSP-master\BayTrailFspBinPkg\Vbios\vga.bsf file from BCT? > > Please let me know what could be the reason and if anyone has seen such > behavior earlier > > > Best Regards > Ranga > > >
-- coreboot mailing list: [email protected] https://mail.coreboot.org/mailman/listinfo/coreboot
