Hi Iru, It looks like the PCI ID of the Xeon E3 DRAM controller is missing. Try adding `0c08` to `mc_pci_device_ids` in src/northbridge/intel/haswell/ northbridge.c and see if that works.
Kind regards, Tristan On Mon, Dec 17, 2018 at 12:14:29PM +0800, Iru Cai wrote: > Hi, > > I'm trying to run coreboot on ASRock H81M-HDS with a Xeon E3 and 8G*2 RAM. > I chose to use my GRUB payload, but coreboot cannot load it with the > following error (full log in attachment): > > CBFS: 'Master Header Locator' located CBFS at [1a0000:400000) > CBFS: Locating 'fallback/payload' > CBFS: Found @ offset 2fb80 size 1929bd > Checking segment from ROM address 0xffdcfbb8 > Payload being loaded at below 1MiB without region being marked as RAM > usable. > Checking segment from ROM address 0xffdcfbd4 > SELF segment doesn't target RAM: 0x00100000, 5203948 bytes > 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES > 1. 000000007f751000-000000007f78efff: CONFIGURATION TABLES > 2. 000000007f78f000-000000007f7ccfff: RAMSTAGE > 3. 000000007f7cd000-000000007f7fffff: CONFIGURATION TABLES > Payload not loaded. > > If I use SeaBIOS as payload, SeaBIOS can run, but it can't allocate > resources for SATA, EHCI and XHCI and can't find any boot devices. > > What is the problem in it? > > Iru > > -- > My website: https://vimacs.lcpu.club > > Please do not send me Microsoft Office/Apple iWork documents. Send > OpenDocument instead! http://fsf.org/campaigns/opendocument/ > coreboot-4.8-2526-gad8478f643-dirty Sun Dec 16 16:50:38 UTC 2018 romstage > starting... > Disabling Watchdog reboot... done. > SMBus controller enabled. > Setting up static northbridge registers... done. > Initializing Graphics... > Back from haswell_early_initialization() > CPU id(306c3) ucode:00000024 Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz > AES supported, TXT supported, VT supported > PCH type: H81, device id: 8c5c, rev id 5 > Starting UEFI PEI System Agent > FMAP: Found "FLASH" version 1.1 at 180000. > FMAP: base = ffc00000 size = 400000 #areas = 4 > FMAP: area RW_MRC_CACHE found @ 190000 (65536 bytes) > MRC: no data in 'RW_MRC_CACHE' > FMAP: area COREBOOT found @ 1a0000 (2490368 bytes) > CBFS: Locating 'mrc.bin' > CBFS: Found @ offset 1fffc0 size 2e6e4 > System Agent: Starting up... > System Agent: Initializing PCH > install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845} > install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276} > System Agent: Initializing PCH (SMBUS) > System Agent: Initializing PCH (USB) > System Agent: Initializing PCH (SA Init) > System Agent: Initializing PCH (Me UMA) > System Agent: Initializing Memory > System Agent: Done. > Sanity checking heap. > System Agent Version 1.6.1 Build 2 > memcfg DDR3 clock 1600 MHz > memcfg channel assignment: A: 0, B 1, C 2 > memcfg channel[0] config (00620020): > ECC inactive > enhanced interleave mode on > rank interleave on > DIMMA 8192 MB width x8 or x32 dual rank, selected > DIMMB 0 MB width x8 or x32 single rank > memcfg channel[1] config (00620020): > ECC inactive > enhanced interleave mode on > rank interleave on > DIMMA 8192 MB width x8 or x32 dual rank, selected > DIMMB 0 MB width x8 or x32 single rank > ME: FW Partition Table : OK > ME: Bringup Loader Failure : NO > ME: Firmware Init Complete : NO > ME: Manufacturing Mode : NO > ME: Boot Options Present : NO > ME: Update In Progress : NO > ME: Current Working State : Normal > ME: Current Operation State : M0 with UMA > ME: Current Operation Mode : Normal > ME: Error Code : No Error > ME: Progress Phase : uKernel Phase > ME: Power Management Event : Clean Moff->Mx wake > ME: Progress Phase State : Unknown phase: 0x02 sate: 0x00 > CBMEM: > IMD: root @ 7f7ff000 254 entries. > IMD: root @ 7f7fec00 62 entries. > External stage cache: > IMD: root @ 7fbff000 254 entries. > IMD: root @ 7fbfec00 62 entries. > MTRR Range: Start=ffc00000 End=0 (Size 400000) > MTRR Range: Start=0 End=1000000 (Size 1000000) > MTRR Range: Start=7f000000 End=80000000 (Size 1000000) > CBFS: 'Master Header Locator' located CBFS at [1a0000:400000) > CBFS: Locating 'fallback/postcar' > CBFS: Found @ offset 28900 size 4364 > Decompressing stage fallback/postcar @ 0x7f7cdfc0 (33808 bytes) > Loading module at 7f7ce000 with entry 7f7ce000. filesize: 0x4110 memsize: > 0x83d0 > Processing 126 relocs. Offset value of 0x7d7ce000 > > > coreboot-4.8-2526-gad8478f643-dirty Sun Dec 16 16:50:38 UTC 2018 postcar > starting... > CBFS: 'Master Header Locator' located CBFS at [1a0000:400000) > CBFS: Locating 'fallback/ramstage' > CBFS: Found @ offset 14100 size 13e4a > Decompressing stage fallback/ramstage @ 0x7f78efc0 (252344 bytes) > Loading module at 7f78f000 with entry 7f78f000. filesize: 0x29d70 memsize: > 0x3d978 > Processing 2823 relocs. Offset value of 0x7e98f000 > > > coreboot-4.8-2526-gad8478f643-dirty Sun Dec 16 16:50:38 UTC 2018 ramstage > starting... > Normal boot. > BS: BS_PRE_DEVICE times (us): entry 0 run 0 exit 0 > BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 1 exit 0 > Enumerating buses... > CPU_CLUSTER: 0 enabled > DOMAIN: 0000 enabled > PCI: pci_scan_bus for bus 00 > PCI: 00:00.0 [8086/0c08] enabled > PCI: Static device PCI: 00:01.0 not found, disabling it. > PCI: Static device PCI: 00:02.0 not found, disabling it. > PCI: Static device PCI: 00:03.0 not found, disabling it. > PCI: 00:14.0 [8086/8c31] enabled > PCI: 00:16.0 [8086/8c3a] enabled > PCI: 00:16.1: Disabling device > PCI: 00:16.2: Disabling device > PCI: 00:16.3: Disabling device > PCI: 00:19.0: Disabling device > PCI: 00:1a.0 [8086/8c2d] enabled > PCI: 00:1b.0 [8086/8c20] enabled > PCIe Root Port 1 ASPM is disabled > PCI: 00:1c.0 [8086/8c10] enabled > PCI: 00:1c.1 [8086/8c12] disabled > PCI: 00:1c.2 [8086/8c14] disabled > PCIe Root Port 4 ASPM is disabled > PCI: 00:1c.3 [8086/8c16] enabled > PCIe Root Port 5 ASPM is disabled > PCI: 00:1c.4 [8086/8c18] enabled > PCIe Root Port 6 ASPM is disabled > PCI: 00:1c.5 [8086/8c1a] enabled > PCI: 00:1d.0 [8086/8c26] enabled > PCI: 00:1f.0 [8086/8c5c] enabled > PCI: 00:1f.2 [8086/8c02] enabled > PCI: 00:1f.3 [8086/8c22] enabled > PCI: 00:1f.5: Disabling device > PCI: 00:1f.6: Disabling device > PCI: pci_scan_bus for bus 01 > scan_bus: scanning of bus PCI: 00:1c.0 took 2646 usecs > PCI: pci_scan_bus for bus 02 > PCI: 02:00.0 [10ec/8168] enabled > Enabling Common Clock Configuration > ASPM: Enabled L1 > scan_bus: scanning of bus PCI: 00:1c.3 took 10596 usecs > PCI: pci_scan_bus for bus 03 > PCI: 03:00.0 [1b21/1142] enabled > Enabling Common Clock Configuration > ASPM: Enabled None > Failed to enable LTR for dev = PCI: 03:00.0 > scan_bus: scanning of bus PCI: 00:1c.4 took 14643 usecs > PCI: pci_scan_bus for bus 04 > PCI: 04:00.0 [168c/0030] enabled > Enabling Common Clock Configuration > ASPM: Enabled None > Failed to enable LTR for dev = PCI: 04:00.0 > scan_bus: scanning of bus PCI: 00:1c.5 took 14625 usecs > PNP: 002e.0 disabled > PNP: 002e.1 enabled > PNP: 002e.2 enabled > PNP: 002e.3 enabled > PNP: 002e.5 enabled > PNP: 002e.6 disabled > PNP: 002e.7 disabled > PNP: 002e.107 disabled > PNP: 002e.8 disabled > PNP: 002e.108 disabled > PNP: 002e.208 disabled > PNP: 002e.308 disabled > PNP: 002e.109 disabled > PNP: 002e.209 disabled > PNP: 002e.309 disabled > PNP: 002e.409 disabled > PNP: 002e.509 disabled > PNP: 002e.609 disabled > PNP: 002e.709 disabled > PNP: 002e.a disabled > PNP: 002e.b enabled > PNP: 002e.d disabled > PNP: 002e.e disabled > PNP: 002e.f disabled > PNP: 002e.14 disabled > PNP: 002e.16 disabled > PNP: 002e.17 disabled > scan_bus: scanning of bus PCI: 00:1f.0 took 54169 usecs > scan_bus: scanning of bus PCI: 00:1f.3 took 2 usecs > scan_bus: scanning of bus DOMAIN: 0000 took 217465 usecs > scan_bus: scanning of bus Root Device took 226566 usecs > done > FMAP: area RW_MRC_CACHE found @ 190000 (65536 bytes) > MRC: Checking cached data update for 'RW_MRC_CACHE'. > Manufacturer: ef > SF: Detected W25Q32 with sector size 0x1000, total 0x400000 > MRC: no data in 'RW_MRC_CACHE' > MRC: cache data 'RW_MRC_CACHE' needs update. > BS: BS_DEV_ENUMERATE times (us): entry 0 run 234019 exit 36682 > Allocating resources... > Reading resources... > Done reading resources. > skipping PNP: 002e.1@f0 fixed resource, size=0! > Setting resources... > PCI: 00:14.0 10 <- [0x00feb00000 - 0x00feb0ffff] size 0x00010000 gran 0x10 > mem64 > PCI: 00:16.0 10 <- [0x00feb18000 - 0x00feb1800f] size 0x00000010 gran 0x04 > mem64 > PCI: 00:1a.0 10 <- [0x00feb15000 - 0x00feb153ff] size 0x00000400 gran 0x0a mem > PCI: 00:1b.0 10 <- [0x00feb10000 - 0x00feb13fff] size 0x00004000 gran 0x0e > mem64 > PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c > bus 01 io > PCI: 00:1c.0 24 <- [0x00febfffff - 0x00febffffe] size 0x00000000 gran 0x14 > bus 01 prefmem > PCI: 00:1c.0 20 <- [0x00febfffff - 0x00febffffe] size 0x00000000 gran 0x14 > bus 01 mem > PCI: 00:1c.3 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c > bus 02 io > PCI: 00:1c.3 24 <- [0x00fe700000 - 0x00fe7fffff] size 0x00100000 gran 0x14 > bus 02 prefmem > PCI: 00:1c.3 20 <- [0x00fe800000 - 0x00fe8fffff] size 0x00100000 gran 0x14 > bus 02 mem > PCI: 02:00.0 10 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io > PCI: 02:00.0 18 <- [0x00fe800000 - 0x00fe800fff] size 0x00001000 gran 0x0c > mem64 > PCI: 02:00.0 20 <- [0x00fe700000 - 0x00fe703fff] size 0x00004000 gran 0x0e > prefmem64 > PCI: 00:1c.4 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c > bus 03 io > PCI: 00:1c.4 24 <- [0x00febfffff - 0x00febffffe] size 0x00000000 gran 0x14 > bus 03 prefmem > PCI: 00:1c.4 20 <- [0x00fe900000 - 0x00fe9fffff] size 0x00100000 gran 0x14 > bus 03 mem > PCI: 03:00.0 10 <- [0x00fe900000 - 0x00fe907fff] size 0x00008000 gran 0x0f > mem64 > PCI: 00:1c.5 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c > bus 04 io > PCI: 00:1c.5 24 <- [0x00febfffff - 0x00febffffe] size 0x00000000 gran 0x14 > bus 04 prefmem > PCI: 00:1c.5 20 <- [0x00fea00000 - 0x00feafffff] size 0x00100000 gran 0x14 > bus 04 mem > PCI: 04:00.0 10 <- [0x00fea00000 - 0x00fea1ffff] size 0x00020000 gran 0x11 > mem64 > PCI: 04:00.0 30 <- [0x00fea20000 - 0x00fea2ffff] size 0x00010000 gran 0x10 > romem > PCI: 00:1d.0 10 <- [0x00feb16000 - 0x00feb163ff] size 0x00000400 gran 0x0a mem > PNP: 002e.1 60 <- [0x0000000378 - 0x000000037f] size 0x00000008 gran 0x03 io > PNP: 002e.1 70 <- [0x0000000007 - 0x0000000007] size 0x00000001 gran 0x00 irq > PNP: 002e.1 74 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 drq > PNP: 002e.1 f0 <- [0x000000003c - 0x000000003b] size 0x00000000 gran 0x00 irq > PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io > PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq > PNP: 002e.3 60 <- [0x00000002f8 - 0x00000002ff] size 0x00000008 gran 0x03 io > PNP: 002e.3 70 <- [0x0000000003 - 0x0000000003] size 0x00000001 gran 0x00 irq > PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] size 0x00000001 gran 0x00 io > PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] size 0x00000001 gran 0x00 io > PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] size 0x00000001 gran 0x00 irq > PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] size 0x00000001 gran 0x00 irq > PNP: 002e.b 60 <- [0x0000000290 - 0x0000000291] size 0x00000002 gran 0x01 io > PNP: 002e.b 62 <- [0x0000000000 - 0x0000000001] size 0x00000002 gran 0x01 io > PNP: 002e.b 70 <- [0x0000000000 - 0x0000000000] size 0x00000001 gran 0x00 irq > PCI: 00:1f.2 10 <- [0x0000002020 - 0x0000002027] size 0x00000008 gran 0x03 io > PCI: 00:1f.2 14 <- [0x0000002030 - 0x0000002033] size 0x00000004 gran 0x02 io > PCI: 00:1f.2 18 <- [0x0000002028 - 0x000000202f] size 0x00000008 gran 0x03 io > PCI: 00:1f.2 1c <- [0x0000002034 - 0x0000002037] size 0x00000004 gran 0x02 io > PCI: 00:1f.2 20 <- [0x0000002000 - 0x000000201f] size 0x00000020 gran 0x05 io > PCI: 00:1f.2 24 <- [0x00feb14000 - 0x00feb147ff] size 0x00000800 gran 0x0b mem > PCI: 00:1f.3 10 <- [0x00feb17000 - 0x00feb170ff] size 0x00000100 gran 0x08 > mem64 > Done setting resources. > Done allocating resources. > BS: BS_DEV_RESOURCES times (us): entry 0 run 338864 exit 0 > Enabling resources... > PCI: 00:00.0 subsystem <- 1849/0c00 > PCI: 00:00.0 cmd <- 06 > PCI: 00:14.0 subsystem <- 1849/8c31 > PCI: 00:14.0 cmd <- 102 > PCI: 00:16.0 subsystem <- 1849/8c3a > PCI: 00:16.0 cmd <- 02 > PCI: 00:1a.0 subsystem <- 1849/8c2d > PCI: 00:1a.0 cmd <- 102 > PCI: 00:1b.0 subsystem <- 1849/7662 > PCI: 00:1b.0 cmd <- 102 > PCI: 00:1c.0 bridge ctrl <- 0003 > PCI: 00:1c.0 subsystem <- 1849/8c10 > PCI: 00:1c.0 cmd <- 00 > PCI: 00:1c.3 bridge ctrl <- 0003 > PCI: 00:1c.3 subsystem <- 1849/8c16 > PCI: 00:1c.3 cmd <- 07 > PCI: 00:1c.4 bridge ctrl <- 0003 > PCI: 00:1c.4 subsystem <- 1849/8c18 > PCI: 00:1c.4 cmd <- 06 > PCI: 00:1c.5 bridge ctrl <- 0003 > PCI: 00:1c.5 subsystem <- 1849/8c1a > PCI: 00:1c.5 cmd <- 06 > PCI: 00:1d.0 subsystem <- 1849/8c26 > PCI: 00:1d.0 cmd <- 102 > PCI: 00:1f.0 subsystem <- 1849/8c5c > PCI: 00:1f.0 cmd <- 107 > PCI: 00:1f.2 subsystem <- 1849/8c02 > PCI: 00:1f.2 cmd <- 103 > PCI: 00:1f.3 subsystem <- 1849/8c22 > PCI: 00:1f.3 cmd <- 103 > PCI: 02:00.0 cmd <- 03 > PCI: 03:00.0 subsystem <- 1849/1042 > PCI: 03:00.0 cmd <- 102 > PCI: 04:00.0 cmd <- 02 > done. > BS: BS_DEV_ENABLE times (us): entry 0 run 93919 exit 0 > Initializing devices... > Root Device init ... > Root Device init finished in 1974 usecs > CPU_CLUSTER: 0 init ... > MTRR: Physical address space: > 0x00000000fe700000 - 0x0000000100000000 size 0x01900000 type 0 > MTRR: Fixed MSR 0x250 0x0000000000000000 > MTRR: Fixed MSR 0x258 0x0000000000000000 > MTRR: Fixed MSR 0x259 0x0000000000000000 > MTRR: Fixed MSR 0x268 0x0000000000000000 > MTRR: Fixed MSR 0x269 0x0000000000000000 > MTRR: Fixed MSR 0x26a 0x0000000000000000 > MTRR: Fixed MSR 0x26b 0x0000000000000000 > MTRR: Fixed MSR 0x26c 0x0000000000000000 > MTRR: Fixed MSR 0x26d 0x0000000000000000 > MTRR: Fixed MSR 0x26e 0x0000000000000000 > MTRR: Fixed MSR 0x26f 0x0000000000000000 > CPU physical address size: 39 bits > MTRR: default type WB/UC MTRR counts: 3/0. > MTRR: UC selected as default type. > > MTRR check > Fixed MTRRs : Enabled > Variable MTRRs: Enabled > > Initializing VR config. > CPU has 4 cores, 8 threads enabled. > Setting up SMI for CPU > Will perform SMM setup. > CBFS: 'Master Header Locator' located CBFS at [1a0000:400000) > CBFS: Locating 'cpu_microcode_blob.bin' > CBFS: Found @ offset 9080 size b000 > microcode: sig=0x306c3 pf=0x2 revision=0x24 > CPU: Intel(R) Xeon(R) CPU E3-1271 v3 @ 3.60GHz. > Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170 > Processing 16 relocs. Offset value of 0x00030000 > Attempting to start 7 APs > Waiting for 10ms after sending INIT. > Waiting for 1st SIPI to complete...AP: slot 2 apic_id 1. > AP: slot 6 apic_id 7. > AP: slot 1 apic_id 2. > AP: slot 3 apic_id 3. > AP: slot 5 apic_id 5. > AP: slot 7 apic_id 6. > done. > AP: slot 4 apic_id 4. > Waiting for 2nd SIPI to complete...done. > Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8 > Processing 13 relocs. Offset value of 0x00038000 > SMM Module: stub loaded at 00038000. Will call 7f7a4b5d(00000000) > Installing SMM handler to 0x7f800000 > Loading module at 7f810000 with entry 7f810419. filesize: 0x1950 memsize: > 0x5978 > Processing 58 relocs. Offset value of 0x7f810000 > Loading module at 7f808000 with entry 7f808000. filesize: 0x1a8 memsize: 0x1a8 > Processing 13 relocs. Offset value of 0x7f808000 > SMM Module: placing jmp sequence at 7f807c00 rel16 0x03fd > SMM Module: placing jmp sequence at 7f807800 rel16 0x07fd > SMM Module: placing jmp sequence at 7f807400 rel16 0x0bfd > SMM Module: placing jmp sequence at 7f807000 rel16 0x0ffd > SMM Module: placing jmp sequence at 7f806c00 rel16 0x13fd > SMM Module: placing jmp sequence at 7f806800 rel16 0x17fd > SMM Module: placing jmp sequence at 7f806400 rel16 0x1bfd > SMM Module: stub loaded at 7f808000. Will call 7f810419(00000000) > Initializing Southbridge SMI... > SMI_STS: PM1 > TMROF New SMBASE 0x7f800000 > In relocation handler: cpu 0 > New SMBASE=0x7f800000 IEDBASE=0x7fc00000 > Writing SMRR. base = 0x7f800006, mask=0xff800800 > Relocation complete. > New SMBASE 0x7f7ff800 > In relocation handler: cpu 2 > New SMBASE=0x7f7ff800 IEDBASE=0x7fc00000 > Writing SMRR. base = 0x7f800006, mask=0xff800800 > Relocation complete. > New SMBASE 0x7f7fe800 > In relocation handler: cpu 6 > New SMBASE=0x7f7fe800 IEDBASE=0x7fc00000 > Writing SMRR. base = 0x7f800006, mask=0xff800800 > Relocation complete. > New SMBASE 0x7f7fec00 > In relocation handler: cpu 5 > New SMBASE=0x7f7fec00 IEDBASE=0x7fc00000 > Writing SMRR. base = 0x7f800006, mask=0xff800800 > Relocation complete. > New SMBASE 0x7f7ff000 > In relocation handler: cpu 4 > New SMBASE=0x7f7ff000 IEDBASE=0x7fc00000 > Writing SMRR. base = 0x7f800006, mask=0xff800800 > Relocation complete. > New SMBASE 0x7f7fe400 > In relocation handler: cpu 7 > New SMBASE=0x7f7fe400 IEDBASE=0x7fc00000 > Writing SMRR. base = 0x7f800006, mask=0xff800800 > Relocation complete. > New SMBASE 0x7f7ff400 > In relocation handler: cpu 3 > New SMBASE=0x7f7ff400 IEDBASE=0x7fc00000 > Writing SMRR. base = 0x7f800006, mask=0xff800800 > Relocation complete. > New SMBASE 0x7f7ffc00 > In relocation handler: cpu 1 > New SMBASE=0x7f7ffc00 IEDBASE=0x7fc00000 > Writing SMRR. base = 0x7f800006, mask=0xff800800 > Relocation complete. > Initializing CPU #0 > CPU: vendor Intel device 306c3 > CPU: family 06, model 3c, stepping 03 > Setting up local APIC... apic_id: 0x00 done. > VMX status: enabled, locked > haswell: energy policy set to 6 > haswell: frequency set to 3600 > Turbo is available but hidden > Turbo has been enabled > CPU #0 initialized > Initializing CPU #2 > Initializing CPU #1 > CPU: vendor Intel device 306c3 > Initializing CPU #4 > CPU: family 06, model 3c, stepping 03 > CPU: vendor Intel device 306c3 > CPU: vendor Intel device 306c3 > Setting up local APIC...CPU: family 06, model 3c, stepping 03 > apic_id: 0x01 Initializing CPU #3 > done. > Setting up local APIC...Initializing CPU #5 > VMX status: enabled, locked > Initializing CPU #6 > haswell: energy policy set to 6 > Initializing CPU #7 > CPU: vendor Intel device 306c3 > haswell: frequency set to 3600 > CPU: family 06, model 3c, stepping 03 > CPU #2 initialized > apic_id: 0x02 CPU: family 06, model 3c, stepping 03 > Setting up local APIC...Setting up local APIC...CPU: vendor Intel device 306c3 > CPU: vendor Intel device 306c3 > done. > CPU: vendor Intel device 306c3 > apic_id: 0x04 apic_id: 0x05 CPU: family 06, model 3c, stepping 03 > CPU: family 06, model 3c, stepping 03 > CPU: family 06, model 3c, stepping 03 > Setting up local APIC...Setting up local APIC...Setting up local APIC...done. > apic_id: 0x03 VMX status: enabled, locked > VMX status: enabled, locked > done. > haswell: energy policy set to 6 > done. > haswell: energy policy set to 6 > VMX status: enabled, locked > haswell: frequency set to 3600 > haswell: frequency set to 3600 > VMX status: enabled, locked > CPU #5 initialized > apic_id: 0x07 apic_id: 0x06 CPU #1 initialized > done. > haswell: energy policy set to 6 > VMX status: enabled, locked > done. > haswell: energy policy set to 6 > haswell: frequency set to 3600 > haswell: frequency set to 3600 > CPU #4 initialized > VMX status: enabled, locked > CPU #6 initialized > haswell: energy policy set to 6 > haswell: energy policy set to 6 > haswell: frequency set to 3600 > haswell: frequency set to 3600 > CPU #7 initialized > CPU #3 initialized > bsp_do_flight_plan done after 484 msecs. > Enabling SMIs. > Locking SMM. > CPU_CLUSTER: 0 init finished in 661544 usecs > PCI: 00:00.0 init ... > PCI: 00:00.0 init finished in 2736 usecs > PCI: 00:14.0 init ... > IOBP: set 0xe5004001 to 0x000000ce > PCI: 00:14.0 init finished in 7516 usecs > PCI: 00:16.0 init ... > ME: FW Partition Table : OK > ME: Bringup Loader Failure : NO > ME: Firmware Init Complete : YES > ME: Manufacturing Mode : NO > ME: Boot Options Present : NO > ME: Update In Progress : NO > ME: Current Working State : Normal > ME: Current Operation State : M0 with UMA > ME: Current Operation Mode : Normal > ME: Error Code : No Error > ME: Progress Phase : Host Communication > ME: Power Management Event : Clean Moff->Mx wake > ME: Progress Phase State : Host communication established > ME: BIOS path: Normal > ME: Extend SHA-256: > 53d07b5984ce080dbe27b6128243f8752927e05c4627b43d79c11693df819db5 > ME MBP: Header: items: 8, size dw: 35 > ME: found version 9.0.30.1482 > ME: Wake Event to ME Reset: 0 ms > ME: ME Reset to Platform Reset: 0 ms > ME: Platform Reset to CPU Reset: 40 ms > PCI: 00:16.0 init finished in 86133 usecs > PCI: 00:1a.0 init ... > EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce > done. > PCI: 00:1a.0 init finished in 10345 usecs > PCI: 00:1b.0 init ... > Azalia: base = feb10000 > Azalia: codec_mask = 01 > HDA: Initializing codec #0 > HDA: codec viddid: 10ec0662 > HDA: verb not loaded > PCI: 00:1b.0 init finished in 18831 usecs > PCI: 00:1c.0 init ... > Initializing PCH PCIe bridge. > PCI: 00:1c.0 init finished in 6204 usecs > PCI: 00:1c.3 init ... > Initializing PCH PCIe bridge. > PCI: 00:1c.3 init finished in 6213 usecs > PCI: 00:1c.4 init ... > Initializing PCH PCIe bridge. > PCI: 00:1c.4 init finished in 6272 usecs > PCI: 00:1c.5 init ... > Initializing PCH PCIe bridge. > PCI: 00:1c.5 init finished in 6300 usecs > PCI: 00:1d.0 init ... > EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce > done. > PCI: 00:1d.0 init finished in 10377 usecs > PCI: 00:1f.0 init ... > pch: lpc_init > IOAPIC: Initializing IOAPIC at 0xfec00000 > IOAPIC: Bootstrap Processor Local APIC = 0x00 > IOAPIC: ID = 0x02 > FMAP: area COREBOOT found @ 1a0000 (2490368 bytes) > CBFS: Locating 'cmos_layout.bin' > CBFS: Found @ offset 28600 size 29c > Set power state keep after power failure. > FMAP: area COREBOOT found @ 1a0000 (2490368 bytes) > CBFS: Locating 'cmos_layout.bin' > CBFS: Found @ offset 28600 size 29c > NMI sources enabled. > LynxPoint PM init > RTC: failed = 0x0 > RTC Init > Disabling ACPI via APMC: > done. > PCI: 00:1f.0 init finished in 64310 usecs > PCI: 00:1f.2 init ... > SATA: Initializing... > SATA: Controller in AHCI mode. > ABAR: feb14000 > PCI: 00:1f.2 init finished in 11793 usecs > PCI: 00:1f.3 init ... > PCI: 00:1f.3 init finished in 2930 usecs > PCI: 02:00.0 init ... > CBFS: 'Master Header Locator' located CBFS at [1a0000:400000) > CBFS: Locating 'rt8168-macaddress' > CBFS: Found @ offset 28440 size 11 > r8168: Resetting NIC...done > r8168: Programming MAC Address...done > r8168: Customized LED 0x824 > r8168: read back LED setting as 0x824 > PCI: 02:00.0 init finished in 31916 usecs > PCI: 03:00.0 init ... > PCI: 03:00.0 init finished in 2775 usecs > PCI: 04:00.0 init ... > PCI: 04:00.0 init finished in 2763 usecs > PNP: 002e.1 init ... > PNP: 002e.1 init finished in 2620 usecs > PNP: 002e.2 init ... > PNP: 002e.2 init finished in 2620 usecs > PNP: 002e.3 init ... > PNP: 002e.3 init finished in 2621 usecs > PNP: 002e.5 init ... > PNP: 002e.5 init finished in 2598 usecs > PNP: 002e.b init ... > PNP: 002e.b init finished in 2621 usecs > Devices initialized > BS: BS_DEV_INIT times (us): entry 7 run 1065844 exit 42 > Finalize devices... > PCI: 00:1f.0 final > Devices finalized > BS: BS_POST_DEVICE times (us): entry 41 run 13140 exit 41 > BS: BS_OS_RESUME_CHECK times (us): entry 41 run 77 exit 42 > CBFS: 'Master Header Locator' located CBFS at [1a0000:400000) > CBFS: Locating 'fallback/dsdt.aml' > CBFS: Found @ offset 2ccc0 size 2e49 > CBFS: 'Master Header Locator' located CBFS at [1a0000:400000) > CBFS: Locating 'fallback/slic' > CBFS: 'fallback/slic' not found. > ACPI: Writing ACPI tables at 7f751000. > ACPI: * FACS > ACPI: * DSDT > ACPI: * FADT > ACPI: added table 1/32, length now 40 > ACPI: * SSDT > Generating ACPI PIRQ entries > ACPI: added table 2/32, length now 44 > ACPI: * MCFG > ACPI: added table 3/32, length now 48 > ACPI: * MADT > ACPI: added table 4/32, length now 52 > current = 7f754570 > ACPI: * DMAR > ACPI: added table 5/32, length now 56 > ACPI: * HPET > ACPI: added table 6/32, length now 60 > ACPI: * SSDT2 > ACPI: added table 7/32, length now 64 > current = 7f7546a0 > ACPI: done. > ACPI tables: 13984 bytes. > Writing table forward entry at 0x00000500 > Wrote coreboot table at: 00000500, 0x10 bytes, checksum 3067 > Writing coreboot table at 0x7f775000 > CBFS: 'Master Header Locator' located CBFS at [1a0000:400000) > CBFS: Locating 'cmos_layout.bin' > CBFS: Found @ offset 28600 size 29c > 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES > 1. 000000007f751000-000000007f78efff: CONFIGURATION TABLES > 2. 000000007f78f000-000000007f7ccfff: RAMSTAGE > 3. 000000007f7cd000-000000007f7fffff: CONFIGURATION TABLES > CBFS: 'Master Header Locator' located CBFS at [1a0000:400000) > Wrote coreboot table at: 7f775000, 0x564 bytes, checksum 7fe6 > coreboot table: 1404 bytes. > IMD ROOT 0. 7f7ff000 00001000 > IMD SMALL 1. 7f7fe000 00001000 > CONSOLE 2. 7f7de000 00020000 > TIME STAMP 3. 7f7dd000 00000910 > MRC DATA 4. 7f7dc000 00000fe4 > ROMSTG STCK 5. 7f7d7000 00005000 > AFTER CAR 6. 7f7cd000 0000a000 > RAMSTAGE 7. 7f78e000 0003f000 > ACPI GNVS 8. 7f78d000 00001000 > SMM BACKUP 9. 7f77d000 00010000 > COREBOOT 10. 7f775000 00008000 > ACPI 11. 7f751000 00024000 > IMD small region: > IMD ROOT 0. 7f7fec00 00000400 > MEM INFO 1. 7f7fea40 000001a9 > ROMSTAGE 2. 7f7fea20 00000004 > COREBOOTFWD 3. 7f7fe9e0 00000028 > BS: BS_WRITE_TABLES times (us): entry 42 run 302936 exit 42 > CBFS: 'Master Header Locator' located CBFS at [1a0000:400000) > CBFS: Locating 'fallback/payload' > CBFS: Found @ offset 2fb80 size 1929bd > Checking segment from ROM address 0xffdcfbb8 > Payload being loaded at below 1MiB without region being marked as RAM usable. > Checking segment from ROM address 0xffdcfbd4 > SELF segment doesn't target RAM: 0x00100000, 5203948 bytes > 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES > 1. 000000007f751000-000000007f78efff: CONFIGURATION TABLES > 2. 000000007f78f000-000000007f7ccfff: RAMSTAGE > 3. 000000007f7cd000-000000007f7fffff: CONFIGURATION TABLES > Payload not loaded. > -- > coreboot mailing list: coreboot@coreboot.org > https://mail.coreboot.org/mailman/listinfo/coreboot -- coreboot mailing list: coreboot@coreboot.org https://mail.coreboot.org/mailman/listinfo/coreboot