I can't say about those AM3 boards but my coreboot'ed AMD Lenovo G505S
is working fine with 16GB DDR3 installed. Maybe you could check if
they have a similar CPU architecture (G505S A10-5750M is Richland) and
also check the similarity of their FCH aka "southbridges" (G505S has
Bolton M3), while waiting for a more helpful answer from someone more
knowledgeable (+ could check if their board_status reports contain a
kernel log where you could check the size of installed RAM)

чт, 3 янв. 2019 г. в 21:30, <[email protected]>:
>
> Hello,
>
> I have found that following boards are indicated as supported:
>
> Version:1.0 StartHTML:0000000105 EndHTML:0000025498 StartFragment:0000020391 
> EndFragment:0000025458
>
> ASUS     M4A785-M         WIP...   AMD Fam10h    AMD RS780/SB700          
> ITE™ IT8712F     AMD Athlon™ 64 / FX / X2          Socket AM3/AM2(+)    DIP8  
>     SPI         Y             Y             —
>
> ASUS     M4A785T-M      OK...      AMD Fam10h    AMD RS780/SB700          
> ITE™ IT8712F     AMD Athlon™ 64 / FX / X2          Socket AM3      DIP8      
> SPI         Y             Y             —
>
> ASUS     M4A78-EM         OK...      AMD Fam10h    AMD RS780/SB700          
> ITE™ IT8712F     AMD Athlon™ 64 / FX / X2          Socket AM3/AM2(+)    DIP8  
>     SPI         Y             Y             —
>
> ASUS     M5A88-V            OK...      AMD Fam10h    AMD 880G/850 ITE™ 
> IT8721F     AMD Athlon™Phenom™Sempron™ 64 / FX / X2           Socket AM3/AM3+ 
>        DIP8      SPI         Y             Y             —
>
> GIGABYTE           GA-MA785GMT-UD2H OK...      AMD Fam10h    AMD 785G / SB710 
>         ITE IT8718F         AMD Phenom™ II / Athlon™ II          Socket AM3   
>     ?            ?            ?            ?            —
>
> GIGABYTE           GA-MA78GM-US2H       OK          AMD Fam10h    AMD 780G / 
> SB700         ITE IT8718F         AMD Phenom™ / Athlon™ / Sempron™   Socket 
> AM2+    ?            ?            ?            ?            —
>
>
>
>
> And actually most of them missing any info on the status page and somewhere 
> is info like:
> The boards works only with less than 4GB of RAM, if installed more then it 
> does not boot Linux.
>
> You can see that some AMD 16GB boards support 32GB two with 4x8GB modules:
>
> https://www.overclockers.com/forums/showthread.php/698565-Can-i-use-8GB-DDR3-single-module-with-Biostar-TA785-G3
>
> http://www.tomshardware.com/answers/id-1714859/asus-m5a88-evo-ram.html
>
> But these are 32GBs with their original BIOSes.
>
> What about 16GB or 32GB with a Coreboot flashed on these boards?
> Did anyone tested and used such config with 16GB or 32GB DDR3 RAM?
>
> Kind Regards,
> Alex
>
> _______________________________________________
> coreboot mailing list -- [email protected]
> To unsubscribe send an email to [email protected]
_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]

Reply via email to