whoops, I meant inteltool, not intelmetool On Tue, May 21, 2019 at 6:14 PM Matt DeVillier <[email protected]> wrote:
> support already exists in intelmetool for several 7th-gen/Kabylake > platforms, just not KBL-H. Easiest thing to try would be to add the PCI > IDs into inteltool.h next to the existing ones for KBL north/south bridges > (ie, add: #define PCI_DEVICE_ID_INTEL_CORE_7TH_GEN_H 0x5910) then add it > everywhere the existing ones are referenced (inteltool.c, memory.c, pcie.c) > and then recompile. Actual looks like the southbridge already is, so just > add the northbridge as per above > > On Tue, May 21, 2019 at 5:03 PM Justin Dong-Il Lee <[email protected]> > wrote: > >> As the subject states, whenever I run inteltool -a under root, I do not >> get any outputs. My dump is listed below. I am running a kaby lake 7820hq >> for reference. Any help would be appreciated. Is kaby lake not supported >> for coreboot? >> Best, >> ~Justin >> >> CPU: ID 0x906e9, Processor Type 0x0, Family 0x6, Model 0x9e, Stepping 0x9 >> Northbridge: 8086:5910 (unknown) >> Southbridge: 8086:a154 (CM238) >> IGD: 8086:591b (Intel(R) UHD Graphics 630) >> Error: Dumping GPIOs on this southbridge is not (yet) supported. >> >> >> >> ============= RCBA ============== >> >> Error: Dumping RCBA on this southbridge is not (yet) supported. >> >> >> >> ========== PMBASE/ABASE ========= >> >> Error: Dumping PMBASE on this southbridge is not (yet) supported. >> >> >> >> ============= MCHBAR ============ >> >> Error: Dumping MCHBAR on this northbridge is not (yet) supported. >> >> >> >> ============= EPBAR ============= >> >> Error: Dumping EPBAR on this northbridge is not (yet) supported. >> >> >> >> ============= DMIBAR ============ >> >> Error: Dumping DMIBAR on this northbridge is not (yet) supported. >> >> >> ========= PCIEXBAR ======== >> >> Error: Dumping PCIEXBAR on this northbridge is not (yet) supported. >> >> >> Error: Dumping MSRs on this CPU (0x0906e0) is not (yet) supported. >> >> >> >> ============= AMBs ============ >> >> Error: Dumping AMBs on this MCH is not (yet) supported. >> >> ============= SPI / BIOS CNTL ============= >> >> Error: Dumping SPI on this southbridge is not (yet) supported. >> >> ============= AHCI Registers ============== >> >> ABAR = 0xdf32b000 (MEM) >> >> >> _______________________________________________ >> coreboot mailing list -- [email protected] >> To unsubscribe send an email to [email protected] >> >
_______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]
