Hello, On Mon, Sep 16, 2019 at 12:56 PM Michal Zygowski <[email protected]> wrote: > > On 14.09.2019 17:16, Андрей Карелин wrote: > > Hello > > > Hi, > > First of all thank you for your great work, I mean coreboot, it's > > really cool > > > > I have mainboad Supermicro X11SSM-F rev 1.01, which almost the same as > > supported X11SSH-TF. Any chance that it will work fine with ROM for > > X11SSH-TF?
Somebody is working on it: https://review.coreboot.org/c/coreboot/+/35427 I would recommend messaging him about the port status. He is also active on IRC, if you prefer less formal and more spontaneous communication channels. > I do not see any reason it shouldn't. BMC, chipset and supported > processors are the same. There are small differences in PCI Express > topology which should be adjusted in devicetree and/or FSP config, but > it should still boot. IIRC flash descriptor handles the PCI Express lane > configuration, so small changes in devicetree and/or FSP config eventually. Please do NOT suggest running coreboot ROMs for mainboard X on something that is not mainboard X. If GPIO settings for the southbridge and/or SuperIO differ between boards X and Y, running coreboot for board X on board Y can result in short-circuits, and cause permanent hardware damage. And replacing the SuperIO, southbridge, or even the whole SoC on some board, is a very laborious task which requires expensive, specialized equipment and skills, so it is impractical to do for most people. > Best regards, > Michał > > > > Best regards > > -- > Michał Żygowski > Firmware Engineer > http://3mdeb.com | @3mdeb_com Regards, Angel _______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]
