Hi Mike, I actually got it to compile now with the .config from https://coreboot.org/status/board-status.html <https://coreboot.org/status/board-status.html>. 2018W42 was the last successful build for Alix2d13 and it worked!
Cheers > On 13 Oct 2019, at 22:42, Karim El Chenawi <[email protected]> wrote: > > Hi Mike, I’m new to coreboot so I started by following the tutorial > (excellent documentation btw) https://doc.coreboot.org/tutorial/part1.html > <https://doc.coreboot.org/tutorial/part1.html>, built the coreboot toolchain > and tested with QEMU and all went well. Now, since Alix2d13 is no longer > supported I needed an older version of coreboot and this is where it goes > wrong. According to the message from Reto Rayen a few years back he got it > working with the following: > > 1.) Clone the coreboot git -> git clone > http://review.coreboot.org/coreboot.git > <http://review.coreboot.org/coreboot.git> > 2.) Revert back to the coreboot version -> git reset --hard > a0a3727dbbd7f3ae9f9021e0797ce2fc61d1b79e > 3.) Download the following .config file for compiling -> > http://review.coreboot.org/gitweb?p=board-status.git;a=blob_plain;f=pcengines/alix2d/4.0-6723-ga0a3727-dirty/2014-08-15T23:01:34Z/config.txt;hb=HEAD > > <http://review.coreboot.org/gitweb?p=board-status.git;a=blob_plain;f=pcengines/alix2d/4.0-6723-ga0a3727-dirty/2014-08-15T23:01:34Z/config.txt;hb=HEAD> > 4.) Open the .config file with «make menuconfig» and close it again > 5.) As least you do the «make» and write the coreboot bios on your «Pc > Engines Alix2d13». > > With this is I can still build the toolchain (a few warnings) but when the I > get stuck at "Step 4 - Build the payload - coreinfo": > > make -C payloads/coreinfo olddefconfig ==> make: *** No rule to make target > 'olddefconfig'. Stop. > > I guess the tutorial has changed quite a bit since the version I’m trying to > compile. > > I think I’m way over my head here but I wanted to give it a shot and see if > anyone else had coreboot running on Alix2d13. > >> On 13 Oct 2019, at 10:56, Mike Banon <[email protected]> wrote: >> >>> There are some messages from a few years back from Reto Rayen but I’m not >>> able to reproduce his work. >> >> It would be easier to help you if you can tell, what have you already >> tried and what exactly did not work. >> >> On Sun, Oct 13, 2019 at 10:59 AM Karim El Chenawi <[email protected]> wrote: >>> >>> Hi guys, >>> >>> I was wondering if anyone has a working build of coreboot for PC Engines >>> Alix2d13. I know that this board is old and retired but I still would like >>> to have coreboot on it. There are some messages from a few years back from >>> Reto Rayen but I’m not able to reproduce his work. >>> >>> Thanks, Karim >>> _______________________________________________ >>> coreboot mailing list -- [email protected] >>> To unsubscribe send an email to [email protected] >
_______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]
