Hi Ale,
It could be due to RAM. As far as I know not all modules are compatible
with this board. Also memory must be installed in pairs.
Please, check page 2-17 of the manual.
I would tell you to try to make it work first with stock BIOS.
Regards,
Eli
On 14/09/2020 22:55, Ale via coreboot wrote:
Hello,
I have an Asus kgpe-d16 with 2 AMD opteron 6282 SE installed;
obviously, since I had the first stock bios version the screen was
black and no boot occurs because CPUs are not supported. So I have
ordered a coreboot bios DIP and I have installed it but nothing has
changed, same behaviour (only black screen and no sound, only fans
starts). Can someone have some idea? I even try to log with the serial
port but no log is shown at all...
P.S. Could it be that one of the CPUs is broken? Or that something
went wrong during the flashing procedure over the DIP? Is there a way
to check that the DIP is ok and with coreboot?
Thank you very much!
_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]
_______________________________________________
coreboot mailing list -- [email protected]
To unsubscribe send an email to [email protected]
