Hi Andy, If you already have a stock bios you can extract it with the ifdtool (ifdtool -x Image.bin). If you are doing a port for a hardware which happened to have no stock bios you need to generate the ifd and me with intels fitc tooling. Best, Chris
Von meinem iPhone gesendet > Am 18.09.2020 um 16:09 schrieb Andy Pont <[email protected]>: > > Hello, > > I’m working on porting Coreboot to a laptop that uses Intel Comet Lake. When > the build completes it spits out the following warning: > > ** WARNING ** > coreboot has been built without an Intel Firmware Descriptor. > Never write a complete coreboot.rom without an IFD to your > board's flash chip! You can use flashrom's IFD or layout > parameters to flash only to the BIOS region. > > What is an IFD and how do I create one? > > -Andy. > > > > > > _______________________________________________ > coreboot mailing list -- [email protected] > To unsubscribe send an email to [email protected] _______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]
