Hi Matt, Thank you very much, that helped. Just after I checked this solution, I found this mailing list https://www.mail-archive.com/[email protected]/msg11374.html#. Somehow it didn’t show while googling before.
Best Regards, Anatolii Vorobev From: Matt DeVillier <[email protected]> Sent: Friday, December 25, 2020 8:02 PM To: Anatolii Vorobev <[email protected]> Cc: [email protected] Subject: Re: [coreboot] SeaBios getting stuck in boot menu worth a try to deselect/unset SEABIOS_HARDWARE_IRQ in your coreboot .config On Fri, Dec 25, 2020 at 1:45 AM Anatolii Vorobev <[email protected]<mailto:[email protected]>> wrote: Dear Coreboot community, I am developing bios for my custom Apollo Lake SoC E3950 mainboard. I got to a point where SeaBios is loaded and awaits to choose a boot option. The problem is that its getting stuck while waiting for timeout or keyboard press (see log attached). I figured out that it is getting stuck on wait_irq() function. In particular, call stack looks like this: interactive_bootmenu() (/coreboot/payloads/external/SeaBIOS/seabios/src/boot.c) get_keystroke() (int scan_code = get_keystroke(menutime);) get_keystroke_full() yield_toirq() wait_irq() __stack_hop_back_wait_irq() Why can this happen? Is hardware not initialized properly during Coreboot operation or it should be done in SeaBios? Looks like interrupts from timer and keyboard are not working. I tried loading with FILO payload and keyboard was working Ok except keyboard leds were not working. Best Regards, Anatolii Vorobev _______________________________________________ coreboot mailing list -- [email protected]<mailto:[email protected]> To unsubscribe send an email to [email protected]<mailto:[email protected]>
_______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]
