Issue #446 has been updated by Aaron Burton.
Thanks for your replies, I will try removing the battery and discharging the board. The power LED comes on normally, orange then white like the stock bios. Fans spin normally as well like stock bios as if coreboot initializes but doesn't get to SeaBIOS. This is my first time flashing this system (with multiple tries). I will note my SFF Optiplex is more of a mATX size with two x16 PCI-e slots (4 expansion slots total on the board). That could be my whole problem if coreboot expects a certain PCI layout. If so I'll try to get my hands on an actual SFF going forward. ---------------------------------------- Bug #446: Optiplex 9010 No Post https://ticket.coreboot.org/issues/446#change-1341 * Author: Aaron Burton * Status: New * Priority: Normal * Target version: 4.19 * Start date: 2023-01-09 ---------------------------------------- Working with an Optiplex 9010 SFF, configured and built coreboot as usual against the Optiplex 9010 SFF platform in menuconfig. Left every other setting alone in terms of configuration. Included EC firmware, ME, GBE, IFD blobs from stock firmware into my build. Turns on with fans at normal speed (not full blast), but no keyboard illumination or display output. Using SeaBIOS 1.16.1. Any suggestions as to what may be going on? Thanks. -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: https://ticket.coreboot.org/my/account _______________________________________________ coreboot mailing list -- [email protected] To unsubscribe send an email to [email protected]
