I already found the problem. The comment in devicetree.cb was wrong. Device 1c.5 was not the NIC, but instead it's 1c.3.

I'm now using this:

device pci 1c.3 on  # PCIe Port #4, Realtek PCIe GbE Controller
        device pci 00.0 on
                subsystemid 0x1849 0x1e16
        end
end

And that works fine:

eno0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
    altname enp3s0

I've uploaded the patch to gerrit: https://review.coreboot.org/c/coreboot/+/73516

--
With kind regards,

Kevin Keijzer
_______________________________________________
coreboot mailing list -- coreboot@coreboot.org
To unsubscribe send an email to coreboot-le...@coreboot.org

Reply via email to