----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
There is two reasons for this: 1. A intake air leak, check around the spider, and tighten all hose intake clamps, and some plug in the spider has come out. This spider has a plug for the primer, make sure the primer line are primer is ok, and not leaking air 2. This is the bad one. If your cam lobe has starting grinding itself down. You can check this by taking off the rocker covers and measuring the distance of the exhaust valves opening to the cold cylinders, opening. Also one more thing is that your oil might be braking down, letting your hydraulic tappets not operating properly on the exhaust valves on those hot cylinders. Try new 50 wt. Oil. ===== HAVE A NICE DAY; Jim Howell Uptight39 Gruman OV-1 Mohawker __________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ --------------------------------- to unsubscribe send mailto:[EMAIL PROTECTED] ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Sid.bAhN69 Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Learn More. Surf Less. Newsletters, Tips and Discussions on Topics You Choose. http://www.topica.com/partner/tag01 ==^================================================================
<<attachment: winmail.dat>>
