----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 12, 2001 12:48 AM To: [EMAIL PROTECTED] Subject: Re: [COUPERS] Comprehensive table of Coupe models and serial numbers Hi Ed. I was just wondering if U knew of any suppliers of a seat belt set up with shoulder harness in it. I would like to find one with a STAC on it. Joe Watson. [EMAIL PROTECTED] Here's a comprehensive list I found by searching Yahoo: http://www.faa.gov/avr/news/harness/seatbeltmanlisting.htm I just saw a nice installation using a harness from Hooker Custom Harness. I'll look in to ordering mine from them, shortly. Here is Hooker's web page: http://www.hookerharness.com/ A local Couper has a nice installation with the anchor point at the rear of the window sill, a location John Wright, Sr., says he likes. John says he's NEVER seen the window-sill have separation whereas tail-cone anchored harnessers might have problems if the tail-cone separates which does happen. On the plane I saw, Hooker made the "inside" strap of the shoulder harness 5" longer than the "outside" strap. It also had a metal-metal attachment of the harness to the buckle assembly so the harness won't slide away from the buckle (like sometimes happens with harness that have a fabric loop that goes around the seat belt). It looked like very good quality. I also found this site interesting: http://home.att.net/~f1race43/hooker.htm Ed Burkhead N3802H, Ercoupe 415-D Peoria, IL ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Sid.bAhN69 Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
