----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Matt: The screws that hold the wing tanks to the front spar are #10's. Most of them should be 1/2 inch long, however on the underside, near the fuselage, the screw(s) go through the belly skin and may need to be 5/8 or 3/4 inch long. I believe the proper nomenclature is AN526-1032R8 for the 1/2 inch long screws. (AN526C) if you want stainless screws. The longer ones would be R10 or R12. Lynn Nelsen ================================================================== TO UNSUBSCRIBE go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
