Responses to michael please, -Tom
-----Original Message----- From: Michael Gartke [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 17, 1998 8:52 PM To: [EMAIL PROTECTED] Subject: Ercoupe Rigging Problem I would greatly appreciate it if you sould post my problem on your web page and forward this to any other you might think would be helpful. I am currently finishing an extensive annual and rebuild of a 415-D and am having a problem getting the ailerons into rig. We have gone through the system and centered everything according to the manual, set the bellcranks to 7-11/16" per the manual and fired the ailerons. With this arrangement at 150 deg wheel rotation we have 7 deg down aileron but only 35 deg up aileron. At 90 deg wheel rotation we have 9.5 deg down and 19.5 deg up. I have replaced the bellcrank bearings, the control mast bearings and shaft, and all of the rod end bearings and have only gotten the mentioned travels. I cannot see anything wrong with the system and whas wondering if anyone else had ever had this problem. Is it possible the the aileron horns or the entire ailerons were replaced with units off of an M-10? Thanks for any light you can shed on my predicament. Michael Gartke NC2022H Email [EMAIL PROTECTED]
<<attachment: winmail.dat>>
