----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
William.
Remove the main gear fairing. You will see a hole through the
gear
at the pivot joint. Put a bar or rod through this and use a hydraulic
floor jack on one end of the rod. You can lift it up until the wheel
hangs all the way down. Block the other wheels and be careful under
the
plane. An extra block,[saw horse or what ever] can be placed under the
main spar just in case the jack slipped. A rod of about 5/8" is what I
use for lifting.
Jon Page.
FLAK MAGNET.
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT
Or send an email To: [EMAIL PROTECTED]
This email was sent to: [EMAIL PROTECTED]
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================
<<attachment: winmail.dat>>
