----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- And, if that don't work, as a last resort, try a pair of gloves.
Larry James Genzling wrote: ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Hay folks, Ran into an old problem while working on the F-105 project. As usual while breaking loose and removing the Hydraulic lines I got a lot of hydraulic fluid on my hands. Same old problem with it that I had in the Air Force. After a couple of days of this my hands would start cracking and bleeding. This is due to me having some sort of reaction to additives in the Mil Spec Fluid. I had to resort to and old cure that has never failed and thought it my be practical to pass along to those that experience the same thing with various fluids. This works over night in most cases. First wash your hands very well with an appropriate de-greasing hand soap. Then soak the affected area in Hydrogen peroxide, this is not so much a disinfecting step but more of an Oxygen therapy step. After the peroxide has worked for several minutes wipe, don't wash, it off. Then apply a liberal coating of "Corn Huskers Lotion" to the hand, don't rub it in just apply a thick film. Then put a surgical glove on it and go to bed. In the morning remove the glove and rub in any remaining lotion. You will find that the hand is back to near normal, or at least very close and that the cracks have already started to heal and don't bleed any more. If it is very severe it may take a second night but not normally. Hope this helps some folks out with skin irritations from petroleum products, has worked great for me for over 25 years. Jimi ==^================================================================ EASY UNSUBSCRIBE click here: http://topica.com/u/?aVxiLm.aVzvvT Or send an email To: [EMAIL PROTECTED] This email was sent to: [EMAIL PROTECTED] T O P I C A -- Register now to manage your mail! http://www.topica.com/partner/tag02/register ==^================================================================
<<attachment: winmail.dat>>
