Hello to all, The last time I talked to Lee at Skyport about the coating on the corks he told me that they were coated with epoxy so what I did was buy new corks they are cheap and when I got home I have some one hour epoxy I mixed up enough to coat the cork but I heated it with a hair dryer to make it flow I dipped the cork (old one) while still on the wire in the epoxy until it was coated good then I got an old paper cup Iheld the wire between my fingers and spun the assembly in the empty cup so as to let excess epoxy fly off in the cup I figured that if too much epoxy was on the cork it would sink so I removed as much as possible It works fine should last a couple of years or so.I hope that this helps you save an old one Just in case you need it. dennis 99564 in ill
__________________________________________________________________________ ______ To unsubscribe from this list please send mailto:[EMAIL PROTECTED] ___________________________________________________________ T O P I C A The Email You Want. http://www.topica.com/t/16 Newsletters, Tips and Discussions on Your Favorite Topics
<<attachment: winmail.dat>>
