----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- The only problem with RTV is that petrol and oil will attack it and eventually it will peel away.
At 22:24 21/08/00 , you wrote: >----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- >I just had my nose bowl painted and they forgot to replace the cowl >chafe seal. I made them give me the raw material and attached it with >clear RTV (i.e. silicon seal) I used lots of spring clothspins to hold >in place (about one every 1" or so) while it dried. My mechanic >suggested contact cement but I tested the RTV with some sample material >on a coke can and not only did it hold very tightly. it was possible to >remove it if necessary. > >David Abrams > >[EMAIL PROTECTED] wrote: >> What is a good glue for attaching Cowl Chafe Seal to >> Aluminum and Fiberglass. > >David Abrams >http://ercoupe.com > >__________________________________________________ >To unsubscribe from this list please send mailto:[EMAIL PROTECTED] >___________________________________________________________ >T O P I C A The Email You Want. http://www.topica.com/t/16 >Newsletters, Tips and Discussions on Your Favorite Topics > Regards Brian Garrett Melbourne Viewbank 3084 Australia (613) 9459 1779 Sonerai II VH-JGB 415C VH-??? __________________________________________________ To unsubscribe from this list please send mailto:[EMAIL PROTECTED] ___________________________________________________________ T O P I C A The Email You Want. http://www.topica.com/t/16 Newsletters, Tips and Discussions on Your Favorite Topics
<<attachment: winmail.dat>>
