courier-imap isn't picking up my $MAILDIR env.
i've got it set when I login, but when I imap, it defaults to
~/.Maildir. not /var/mail/$user, as set by $MAILDIR.
I'm running FreeBSD 4.6
Exim version 3.36 #1
courier-imap-1.4.3_1
both built out of ports.
attached is my imapd config.
My start script is stock out of ports, with the interesting bits being:
[...]
. /usr/local/etc/courier-imap/imapd-ssl
. /usr/local/etc/courier-imap/imapd
case $1 in
start)
LIBAUTHMODULES=""
for f in `echo $AUTHMODULES`
do
LIBAUTHMODULES="$LIBAUTHMODULES
/usr/local/libexec/courier-imap/au
thlib/$f"
done
if test -x ${libexecdir}/authlib/authdaemond
then
/usr/bin/env - ${libexecdir}/authlib/authdaemond start
fi
ulimit -d $IMAP_ULIMITD
/usr/bin/env - /bin/sh -c " . /usr/local/etc/courier-imap/imapd ; \
. /usr/local/etc/courier-imap/imapd-ssl ; \
IMAP_STARTTLS=$IMAPDSTARTTLS ; export IMAP_STARTTLS ; \
TLS_PROTOCOL=$TLS_STARTTLS_PROTOCOL ; \
`sed -n '/^#/d;/=/p' </usr/local/etc/courier-imap/imapd | \
sed 's/=.*//;s/^/export /;s/$/;/'`
`sed -n '/^#/d;/=/p' </usr/local/etc/courier-imap/imapd-ssl | \
sed 's/=.*//;s/^/export /;s/$/;/'`
/usr/local/libexec/courier-imap/couriertcpd -address=$ADDRESS \
-stderrlogger=/usr/local/libexec/courier-imap/logger \
-stderrloggername=imapd \
-maxprocs=$MAXDAEMONS -maxperip=$MAXPERIP \
-pid=$PIDFILE $TCPDOPTS \
$PORT ${exec_prefix}/sbin/imaplogin $LIBAUTHMODULES \
${exec_prefix}/bin/imapd ./Maildir"
;;
[...]
tia,
Andrew
##VERSION: $Id: imapd.dist.in,v 1.12 2001/11/29 04:25:56 mrsam Exp $
#
# imapd created from imapd.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
# Copyright 1998 - 2001 Double Precision, Inc. See COPYING for
# distribution information.
#
# This configuration file sets various options for the Courier-IMAP server
# when used with the couriertcpd server.
# A lot of the stuff here is documented in the manual page for couriertcpd.
#
# NOTE - do not use \ to split long variable contents on multiple lines.
# This will break the default imapd.rc script, which parses this file.
#
##NAME: ADDRESS:0
#
# Address to listen on, can be set to a single IP address.
#
# ADDRESS=127.0.0.1
ADDRESS=192.168.0.21
##NAME: PORT:1
#
# Port numbers that connections are accepted on. The default is 143,
# the standard IMAP port.
#
# Multiple port numbers can be separated by commas. When multiple port
# numbers are used it is possible to select a specific IP address for a
# given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900"
# accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
# The previous ADDRESS setting is a default for ports that do not have
# a specified IP address.
PORT=143
##NAME: AUTHSERVICE:0
#
# It's possible to authenticate using a different 'service' parameter
# depending on the connection's port. This only works with authentication
# mechanism that use the 'service' parameter, such as PAM. Example:
#
# AUTHSERVICE143=imap
# AUTHSERVICE993=imaps
##NAME: MAXDAEMONS:0
#
# Maximum number of IMAP servers started
#
MAXDAEMONS=40
##NAME: MAXPERIP:0
#
# Maximum number of connections to accept from the same IP address
MAXPERIP=4
##NAME: PIDFILE:0
#
# File where couriertcpd will save its process ID
#
PIDFILE=/var/run/imapd.pid
##NAME: TCPDOPTS:0
#
# Miscellaneous couriertcpd options that shouldn't be changed.
#
TCPDOPTS="-nodnslookup -noidentlookup"
##NAME: AUTHMODULES:0
#
# Authentication modules. Here's the default list:
#
# authdaemon
#
# The default is set during the initial configuration.
#
AUTHMODULES="authdaemon"
##NAME: AUTHMODULES_ORIG:0
#
# For use by webadmin
AUTHMODULES_ORIG="authdaemon"
##NAME: IMAP_CAPABILITY:0
#
# IMAP_CAPABILITY specifies what most of the response should be to the
# CAPABILITY command.
#
# If you have properly configured Courier to use CRAM-MD5 or CRAM-SHA1
# authentication (see INSTALL), set IMAP_CAPABILITY as follows:
#
# IMAP_CAPABILITY="IMAP4rev1 CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT
THREAD=REFERENCES SORT AUTH=CRAM-MD5 AUTH=CRAM-SHA1"
#
# Otherwise, leave it set to the default value. The IDLE keyword can also
# be added, in experimental mode.
#
# NOTE: CRAM-SHA1 is considered experimental at this time.
#
# NOTE: If you use maildirquotas (see maildir/README.maildirquota), partial
# support for the QUOTA extension can be added.
IMAP_CAPABILITY="IMAP4rev1 CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES
SORT"
##NAME: IMAP_CAPABILITY_ORIG:0
#
# For use by webadmin
IMAP_CAPABILITY_ORIG="IMAP4rev1 CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT
THREAD=REFERENCES SORT AUTH=CRAM-MD5 AUTH=CRAM-SHA1 IDLE"
##NAME: IMAP_IDLE_TIMEOUT:0
#
# If you want to try out the IDLE extension, this setting controls how often
# the server polls for changes to the folder, in IDLE mode (in seconds).
IMAP_IDLE_TIMEOUT=10
##NAME: IMAP_CAPABILITY_TLS:0
#
# The following setting will advertise SASL PLAIN authentication after
# STARTTLS is established. If you want to allow SASL PLAIN authentication
# with or without TLS then just comment this out, and add AUTH=PLAIN to
# IMAP_CAPABILITY
IMAP_CAPABILITY_TLS="$IMAP_CAPABILITY AUTH=PLAIN"
##NAME: IMAP_TLS_ORIG:0
#
# For use by webadmin
IMAP_CAPABILITY_TLS_ORIG="$IMAP_CAPABILITY_ORIG AUTH=PLAIN"
##NAME: IMAP_DISABLETHREADSORT:0
#
# Set IMAP_DISABLETHREADSORT to disable the THREAD and SORT commands -
# server side sorting and threading.
#
# Those capabilities will still be advertised, but the server will reject
# them. Set this option if you want to disable all the extra load from
# server-side threading and sorting. Not advertising those capabilities
# will simply result in the clients reading the entire folder, and sorting
# it on the client side. That will still put some load on the server.
# advertising these capabilities, but rejecting the commands, will stop this
# silliness.
#
IMAP_DISABLETHREADSORT=0
##NAME: IMAP_CHECK_ALL_FOLDERS:0
#
# Set IMAP_CHECK_ALL_FOLDERS to 1 if you want the server to check for new
# mail in every folder. Not all IMAP clients use an IMAP's server new mail
# indicator, but some do, and normally new mail is checked only in INBOX,
# because it is a comparatively time consuming operation, and it would be
# a complete waste of time unless mail filters are used to deliver new
# mail directly to folders.
#
# When IMAP clients are used which support new mail indication, and when
# mail filters are used to sort incoming mail into folders, setting
# IMAP_CHECK_ALL_FOLDERS to 1 will allow IMAP clients to announce new
# mail in folders. Note that this will result in slightly more load on the
# server.
#
IMAP_CHECK_ALL_FOLDERS=1
##NAME: IMAP_OBSOLETE_CLIENT:0
#
# Set IMAP_OBSOLETE_CLIENT if your IMAP client expects \\NoInferiors to mean
# what \\HasNoChildren really means.
IMAP_OBSOLETE_CLIENT=0
##NAME: IMAP_ULIMITD:0
#
# IMAP_ULIMITD sets the maximum size of the data segment of the server
# process. The value of IMAP_ULIMITD is simply passed to the "ulimit -d"
# command. The argument to ulimit -d sets the upper limit on the size
# of the data segment of the server process, in kilobytes. The default
# value of 65536 sets a very generous limit of 64 megabytes, which should
# be more than plenty for anyone.
#
# This feature is used as an additional safety check that should stop
# any potential denial-of-service attacks that exploit any kind of
# a memory leak to exhaust all the available memory on the server.
# It is theoretically possible that obscenely huge folders will also
# result in the server running out of memory when doing server-side
# sorting (by my calculations you have to have at least 100,000 messages
# in a single folder, for that to happen).
IMAP_ULIMITD=65536
##NAME: IMAP_USELOCKS:0
#
# Set IMAP_USELOCKS to 1 if you experience weird problems when using IMAP
# clients that open multiple connections to the server. I would hope that
# most IMAP clients are sane enough not to issue commands to multiple IMAP
# channels which conflict with each other.
#
IMAP_USELOCKS=0
##NAME: IMAP_EMPTYTRASH:0
#
# The following setting is optional, and causes messages from the given
# folder to be automatically deleted after the given number of days.
# IMAP_EMPTYTRASH is a comma-separated list of folder:days. The default
# setting, below, purges 7 day old messages from the Trash folder.
# Another useful setting would be:
#
# IMAP_EMPTYTRASH=Trash:7,Sent:30
#
# This would also delete messages from the Sent folder (presumably copies
# of sent mail) after 30 days. This is a global setting that is applied to
# every mail account, and is probably useful in a controlled, corporate
# environment.
#
# You might want to disable this setting in certain situations - it results
# in a stat() of every file in each folder, at login and logout.
#
IMAP_EMPTYTRASH=Trash:7
##NAME: IMAP_MOVE_EXPUNGE_TO_TRASH:0
#
# Set IMAP_MOVE_EXPUNGE_TO_TRASH to move expunged messages to Trash. This
# effectively allows an undo of message deletion by fishing the deleted
# mail from trash. Trash can be manually expunged as usually, and mail
# will get automatically expunged from Trash according to IMAP_EMPTYTRASH.
#
# NOTE: shared folders are still expunged as usual. Shared folders are
# not affected.
#
IMAP_MOVE_EXPUNGE_TO_TRASH=0
##NAME: IMAPDSTART:0
#
# IMAPDSTART is not used directly. Rather, this is a convenient flag to
# be read by your system startup script in /etc/rc.d, like this:
#
# . /usr/local/libexec/imapd.config
#
# case x$IMAPDSTART in
# x[yY]*)
# /usr/local/libexec/imapd.rc start
# ;;
# esac
#
# The default setting is going to be NO, so you'll have to manually flip
# it to yes.
#IMAPDSTART=NO
IMAPDSTART=YES
