On Thu, 05 Jun 2008 18:14:57 +0000, Curtis Vaughan wrote: > On Wed, 04 Jun 2008 07:06:43 -0400, Sam Varshavchik wrote: > >> Curtis Vaughan writes: >> >>> I have an issue whereby clients are unable to connect to Courier Imap >>> with the error that there are too many connections from their IP. I >>> have changed the following parameter as follows: MAXPERIP=40 in the >>> imapd file. I restarted courier imap, but still the same problem. >> >> That's the maximum total number of connections. There's also a >> different setting for the maximum number of connections from the same >> IP address, which may or may not apply to you. >> > According to all the documentation I've been looking at the MAXPERIP > parameter is precisely the parameter for configuring the number of > simultaneous connections of the same IP address. MAXDAEMONS may be the > parameter you're referring to, no? > Anyhow, I had both MAXPERIP and MAXDAEMONS set at 40. I changed > MAXDAEMONS to 80, but left MAXPERIP at 40. So far it seems to be > working. > Ok, here's something I've noticed. When I look at processes I see:
couriertcpd -address=0 -maxprocs=40 -maxperip=4 So, despite changing imapd these parameters are not being passed to couriertcpd. So, where to I need to make the changes? ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ courier-users mailing list [email protected] Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
