This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear AEvar Arnfjord Bjarmason, This is a computer-generated report for re-engine-TRE-0.02 on 5.10.0, created automatically by CPAN-Reporter-1.08 and sent to the CPAN Testers mailing list. If you have received this email directly, it is because the person testing your distribution chose to send a copy to your CPAN email address; there may be a delay before the official report is received and processed by CPAN Testers. Thank you for uploading your work to CPAN. However, it appears that there were some problems with your distribution. If these results are not what you expect or if you would like to learn how to avoid FAIL reports for missing dependencies, unsupported operating systems, etc., please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: http://cpantest.grango.org Sections of this report: * Tester comments * Program output * Prerequisites * Environment and other context ------------------------------ TESTER COMMENTS ------------------------------ Additional comments from tester: [none provided] ------------------------------ PROGRAM OUTPUT ------------------------------ Output from '/usr/bin/make': cp TRE.pm blib/lib/re/engine/TRE.pm make[1]: Entering directory `/home/imacat/.cpan/build/re-engine-TRE-0.02-OUYP3o/tre' gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" -DHAVE_CONFIG_H regcomp.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" -DHAVE_CONFIG_H regerror.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" -DHAVE_CONFIG_H regexec.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" -DHAVE_CONFIG_H tre-ast.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" -DHAVE_CONFIG_H tre-compile.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" -DHAVE_CONFIG_H tre-match-backtrack.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" -DHAVE_CONFIG_H tre-match-parallel.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" -DHAVE_CONFIG_H tre-mem.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" -DHAVE_CONFIG_H tre-parse.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" -DHAVE_CONFIG_H tre-stack.c gcc -c -I. -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"\" -DXS_VERSION=\"\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" -DHAVE_CONFIG_H xmalloc.c Running Mkbootstrap for libtre () chmod 644 libtre.bs rm -f ../blib/arch/auto/libtre/libtre.so gcc -shared -g -O3 -L/usr/local/lib regcomp.o regerror.o regexec.o tre-ast.o tre-compile.o tre-match-backtrack.o tre-match-parallel.o tre-mem.o tre-parse.o tre-stack.o xmalloc.o -o ../blib/arch/auto/libtre/libtre.so \ \ chmod 755 ../blib/arch/auto/libtre/libtre.so cp libtre.bs ../blib/arch/auto/libtre/libtre.bs chmod 644 ../blib/arch/auto/libtre/libtre.bs make[1]: Leaving directory `/home/imacat/.cpan/build/re-engine-TRE-0.02-OUYP3o/tre' /opt/perl/5.10.0/bin/perl /opt/perl/5.10.0/lib/5.10.0/ExtUtils/xsubpp -typemap /opt/perl/5.10.0/lib/5.10.0/ExtUtils/typemap TRE.xs > TRE.xsc && mv TRE.xsc TRE.c gcc -c -Itre -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" TRE.c Running Mkbootstrap for re::engine::TRE () chmod 644 TRE.bs rm -f blib/arch/auto/re/engine/TRE/TRE.so LD_RUN_PATH="/usr/lib" gcc -shared tre/*.o TRE.o -o blib/arch/auto/re/engine/TRE/TRE.so \ -lpcre \ /usr/bin/ld: cannot find -lpcre collect2: ld returned 1 exit status make: *** [blib/arch/auto/re/engine/TRE/TRE.so] Error 1 ------------------------------ PREREQUISITES ------------------------------ Prerequisite modules loaded: No requirements found ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: LANG = zh_TW LANGUAGE = zh_TW LC_ALL = zh_TW LC_COLLATE = zh_TW LC_CTYPE = zh_TW LC_MESSAGES = zh_TW LC_MONETARY = zh_TW LC_NUMERIC = zh_TW LC_TIME = zh_TW PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin PERL5LIB = /home/imacat/lib/perl5 PERL5_CPANPLUS_IS_RUNNING = 14213 PERL5_CPAN_IS_EXECUTING = /home/imacat/.cpan/build/re-engine-TRE-0.02-OUYP3o/Makefile.PL PERL5_CPAN_IS_RUNNING = 14213 SHELL = /bin/zsh TERM = xterm Perl special variables (and OS-specific diagnostics, for MSWin32): $^X = /opt/perl/5.10.0/bin/perl $UID/$EUID = 1000 / 1000 $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000 $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000 Perl module toolchain versions installed: Module Have ------------------- --------- CPAN 1.9205 Cwd 3.27 ExtUtils::CBuilder 0.22 ExtUtils::Command 1.13 ExtUtils::Install 1.44 ExtUtils::MakeMaker 6.42 ExtUtils::Manifest 1.51_01 ExtUtils::ParseXS 2.18_02 File::Spec 3.27 Module::Build 0.2808_01 Module::Signature 0.55 Test::Harness 3.08 Test::More 0.74 YAML 0.66 YAML::Syck n/a version 0.74 -- Summary of my perl5 (revision 5 version 10 subversion 0) configuration: Platform: osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux ' config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true [EMAIL PROTECTED]' hint=recommended, useposix=true, d_sigaction=define useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=define, use64bitall=define, uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8 alignbytes=16, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64 libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.6' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE' cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'
