This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear EALLENIII, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Feb 16 20:39:24 2008] Trying to get 'http://www.cpan.org/authors/id/E/EA/EALLENIII/CHECKSUMS' [MSG] [Sat Feb 16 20:39:25 2008] Checksum matches for 'Config-Options-0.06.tar.gz' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/t/' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/t/options.t' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/lib/' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/lib/Config/' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/lib/Config/Options/' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/lib/Config/Options/Threaded.pm' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/lib/Config/Options.pm' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/Changes' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/Makefile.PL' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/README' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config-Options-0.06/META.yml' [MSG] [Sat Feb 16 20:39:26 2008] Extracted 'Config::Options' to '/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Config-Options-0.06' [MSG] [Sat Feb 16 20:39:28 2008] Writing Makefile for Config::Options [MSG] [Sat Feb 16 20:39:28 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sat Feb 16 20:39:32 2008] cp lib/Config/Options.pm blib/lib/Config/Options.pm cp lib/Config/Options/Threaded.pm blib/lib/Config/Options/Threaded.pm Manifying blib/man3/Config::Options.3 Manifying blib/man3/Config::Options::Threaded.3 [ERROR] [Sat Feb 16 20:39:35 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/options......Can't locate threads.pm in @INC (@INC contains: /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Config-Options-0.06/blib/lib /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Config-Options-0.06/blib/arch /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Config-Options-0.06/blib /Volumes/Media/smoke/perl562/lib/5.6.2/darwin-thread-multi-64int /Volumes/Media/smoke/perl562/lib/5.6.2 /Volumes/Media/smoke/perl562/lib/site_perl/5.6.2/darwin-thread-multi-64int /Volumes/Media/smoke/perl562/lib/site_perl/5.6.2 /Volumes/Media/smoke/perl562/lib/site_perl .) at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Config-Options-0.06/blib/lib/Config/Options/Threaded.pm line 47. BEGIN failed--compilation aborted at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Config-Options-0.06/blib/lib/Config/Options/Threaded.pm line 47. Compilation failed in require at /Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Config-Options-0.06/blib/lib/Config/Options.pm line 69. # Looks like you planned 18 tests but only ran 1. # Looks like your test died just after 1. Dubious, test returned 255 (wstat 65280, 0xff00) Failed 17/18 subtests Test Summary Report ------------------- t/options.t (Wstat: 65280 Tests: 1 Failed: 0) Non-zero exit status: 255 Parse errors: Bad plan. You planned 18 tests but ran 1. Files=1, Tests=1, 1 wallclock secs ( 0.04 usr 0.02 sys + 0.33 cusr 0.07 csys = 0.46 CPU) Result: FAIL Failed 1/1 test programs. 0/1 subtests failed. make: *** [test_dynamic] Error 35 [MSG] [Sat Feb 16 20:39:35 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: threads As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'EALLENIII ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'threads' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Data::Dumper 2.121 2 Scalar::Util 1.19 0 Test::More 0.74 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 3.07e-02. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin PERL5LIB = :/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Config-Options-0.06/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Config-Options-0.06/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Config-Options-0.06/blib PERL5_CPANPLUS_IS_EXECUTING = PERL5_CPANPLUS_IS_RUNNING = 24772 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /Volumes/Media/smoke/perl562/bin/perl UID: $< = 502 EUID: $> = 502 GID: $( = 502 502 EGID: $) = 502 502 ------------------------------- -- Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration: Platform: osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc ' config_args='-e' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef Compiler: cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include', optimize='-O3', cppflags='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include' ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, usemymalloc=n, prototype=define Linker and Libraries: ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-ldbm -ldl -lm -lc perllibs=-ldl -lm -lc libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a Dynamic Linking: dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
