This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear VVELOX, This is a computer-generated error report created automatically by CPANPLUS, version 0.84. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sun Feb 17 10:27:49 2008] Trying to get 'http://www.cpan.org/authors/id/V/VV/VVELOX/CHECKSUMS' [MSG] [Sun Feb 17 10:27:50 2008] Checksum matches for 'Net-LDAP-LDAPhash-1.0.1.tar.gz' [MSG] [Sun Feb 17 10:27:51 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/' [MSG] [Sun Feb 17 10:27:51 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/lib/' [MSG] [Sun Feb 17 10:27:51 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/t/' [MSG] [Sun Feb 17 10:27:51 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/Changes' [MSG] [Sun Feb 17 10:27:51 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/MANIFEST' [MSG] [Sun Feb 17 10:27:51 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/Makefile.PL' [MSG] [Sun Feb 17 10:27:51 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/README' [MSG] [Sun Feb 17 10:27:51 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/t/pod-coverage.t' [MSG] [Sun Feb 17 10:27:51 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/t/pod.t' [MSG] [Sun Feb 17 10:27:51 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/t/boilerplate.t' [MSG] [Sun Feb 17 10:27:51 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/t/00-load.t' [MSG] [Sun Feb 17 10:27:52 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/lib/Net/' [MSG] [Sun Feb 17 10:27:52 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/lib/Net/LDAP/' [MSG] [Sun Feb 17 10:27:52 2008] Extracted 'Net-LDAP-LDAPhash-1.0.1/lib/Net/LDAP/LDAPhash.pm' [MSG] [Sun Feb 17 10:27:52 2008] Extracted 'Net::LDAP::LDAPhash' to '/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Net-LDAP-LDAPhash-1.0.1' [MSG] [Sun Feb 17 10:27:55 2008] Checking if your kit is complete... Looks good Writing Makefile for Net::LDAP::LDAPhash [MSG] [Sun Feb 17 10:27:55 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value' [MSG] [Sun Feb 17 10:28:00 2008] cp lib/Net/LDAP/LDAPhash.pm blib/lib/Net/LDAP/LDAPhash.pm Manifying blib/man3/Net::LDAP::LDAPhash.3 [ERROR] [Sun Feb 17 10:28:04 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00-load........... # Failed test 'use Net::LDAP::LDAPhash;' # in t/00-load.t at line 6. # Tried to use 'Net::LDAP::LDAPhash'. # Error: Can't locate Net/LDAP.pm in @INC (@INC contains: /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Net-LDAP-LDAPhash-1.0.1/blib/lib /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Net-LDAP-LDAPhash-1.0.1/blib/arch /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Net-LDAP-LDAPhash-1.0.1/blib /Volumes/Media/smoke/perl588/lib/5.8.8/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl588/lib/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl588/lib/site_perl/5.8.8 /Volumes/Media/smoke/perl588/lib/site_perl) at /Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Net-LDAP-LDAPhash-1.0.1/blib/lib/Net/LDAP/LDAPhash.pm line 5. # BEGIN failed--compilation aborted at t/00-load.t line 6. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9. # Testing Net::LDAP::LDAPhash , Perl 5.008008, /Volumes/Media/smoke/perl588/bin/perl # Looks like you failed 1 test of 1. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/1 subtests t/boilerplate.......ok t/pod-coverage......skipped: Test::Pod::Coverage 1.08 required for testing POD coverage t/pod...............skipped: Test::Pod 1.22 required for testing POD Test Summary Report ------------------- t/00-load.t (Wstat: 256 Tests: 1 Failed: 1) Failed test: 1 Non-zero exit status: 1 t/boilerplate.t (Wstat: 0 Tests: 3 Failed: 0) TODO passed: 2 Files=4, Tests=4, 2 wallclock secs ( 0.11 usr 0.07 sys + 0.54 cusr 0.15 csys = 0.87 CPU) Result: FAIL Failed 1/4 test programs. 1/4 subtests failed. make: *** [test_dynamic] Error 255 [MSG] [Sun Feb 17 10:28:04 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value' MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Net::LDAP As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'VVELOX ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Net::LDAP' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Module Name Have Want Test::More 0.62 0 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke. ------------------------------ ENVIRONMENT AND OTHER CONTEXT ------------------------------ Environment variables: AUTOMATED_TESTING = 1 PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin PERL5LIB = :/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Net-LDAP-LDAPhash-1.0.1/blib/lib:/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Net-LDAP-LDAPhash-1.0.1/blib/arch:/Volumes/Media/smoke/perl588/.cpanplus/5.8.8/build/Net-LDAP-LDAPhash-1.0.1/blib PERL5_CPANPLUS_IS_RUNNING = 2261 PERL5_CPANPLUS_IS_VERSION = 0.84 PERL_MM_USE_DEFAULT = 1 SHELL = /bin/bash TERM = screen Perl special variables (and OS-specific diagnostics, for MSWin32): Perl: $^X = /Volumes/Media/smoke/perl588/bin/perl UID: $< = 502 EUID: $> = 502 GID: $( = 502 502 EGID: $) = 502 502 ------------------------------- -- Summary of my perl5 (revision 5 version 8 subversion 8) configuration: Platform: osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int-2level uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc ' config_args='-e -Dprefix=/Volumes/Media/smoke/perl588 -Dusethreads -Duse64bitint -Dusemalloc=n' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include', optimize='-O3', cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include' ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /usr/lib libs=-ldbm -ldl -lm -lc perllibs=-ldl -lm -lc libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
