This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Simon Drabble,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sun Feb 17 17:14:36 2008] Trying to get
'http://www.cpan.org/authors/id/A/AQ/AQUILINA/WWW-eiNetwork-0.01.tar.gz'
[MSG] [Sun Feb 17 17:14:39 2008] Trying to get
'http://www.cpan.org/authors/id/A/AQ/AQUILINA/CHECKSUMS'
[MSG] [Sun Feb 17 17:14:40 2008] Checksum matches for
'WWW-eiNetwork-0.01.tar.gz'
[MSG] [Sun Feb 17 17:14:40 2008] Extracted 'WWW-eiNetwork-0.01/'
[MSG] [Sun Feb 17 17:14:40 2008] Extracted 'WWW-eiNetwork-0.01/Changes'
[MSG] [Sun Feb 17 17:14:40 2008] Extracted 'WWW-eiNetwork-0.01/lib/'
[MSG] [Sun Feb 17 17:14:40 2008] Extracted 'WWW-eiNetwork-0.01/lib/WWW/'
[MSG] [Sun Feb 17 17:14:40 2008] Extracted
'WWW-eiNetwork-0.01/lib/WWW/eiNetwork.pm'
[MSG] [Sun Feb 17 17:14:40 2008] Extracted 'WWW-eiNetwork-0.01/Makefile.PL'
[MSG] [Sun Feb 17 17:14:40 2008] Extracted 'WWW-eiNetwork-0.01/MANIFEST'
[MSG] [Sun Feb 17 17:14:40 2008] Extracted 'WWW-eiNetwork-0.01/README'
[MSG] [Sun Feb 17 17:14:40 2008] Extracted 'WWW-eiNetwork-0.01/t/'
[MSG] [Sun Feb 17 17:14:40 2008] Extracted 'WWW-eiNetwork-0.01/t/parsing.t'
[MSG] [Sun Feb 17 17:14:40 2008] Extracted 'WWW::eiNetwork' to
'/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/WWW-eiNetwork-0.01'
[MSG] [Sun Feb 17 17:14:42 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite HTML::TableContentParser 0 not found.
Warning: prerequisite WWW::Mechanize 0 not found.
Writing Makefile for WWW::eiNetwork
[MSG] [Sun Feb 17 17:14:42 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Sun Feb 17 17:14:42 2008] Module 'WWW::eiNetwork' requires
'HTML::TableContentParser' version '0' to be installed
[MSG] [Sun Feb 17 17:14:42 2008] Module 'WWW::eiNetwork' requires
'WWW::Mechanize' version '0' to be installed
[MSG] [Sun Feb 17 17:14:42 2008] Trying to get
'http://www.cpan.org/authors/id/S/SD/SDRABBLE/HTML-TableContentParser-0.13.tar.gz'
[MSG] [Sun Feb 17 17:14:44 2008] Trying to get
'http://www.cpan.org/authors/id/S/SD/SDRABBLE/CHECKSUMS'
[MSG] [Sun Feb 17 17:14:45 2008] Checksum matches for
'HTML-TableContentParser-0.13.tar.gz'
[MSG] [Sun Feb 17 17:14:45 2008] Extracted 'HTML-TableContentParser-0.13/'
[MSG] [Sun Feb 17 17:14:45 2008] Extracted 'HTML-TableContentParser-0.13/README'
[MSG] [Sun Feb 17 17:14:46 2008] Extracted
'HTML-TableContentParser-0.13/Makefile.PL'
[MSG] [Sun Feb 17 17:14:46 2008] Extracted
'HTML-TableContentParser-0.13/Changes'
[MSG] [Sun Feb 17 17:14:46 2008] Extracted
'HTML-TableContentParser-0.13/MANIFEST'
[MSG] [Sun Feb 17 17:14:46 2008] Extracted
'HTML-TableContentParser-0.13/TableContentParser.pm'
[MSG] [Sun Feb 17 17:14:46 2008] Extracted 'HTML-TableContentParser-0.13/TODO'
[MSG] [Sun Feb 17 17:14:46 2008] Extracted 'HTML-TableContentParser-0.13/t/'
[MSG] [Sun Feb 17 17:14:46 2008] Extracted 'HTML-TableContentParser-0.13/t/1.t'
[MSG] [Sun Feb 17 17:14:46 2008] Extracted 'HTML::TableContentParser' to
'/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/HTML-TableContentParser-0.13'
[MSG] [Sun Feb 17 17:14:47 2008] Checking if your kit is complete...
Looks good
Writing Makefile for HTML::TableContentParser
[MSG] [Sun Feb 17 17:14:47 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Sun Feb 17 17:14:50 2008] cp TableContentParser.pm
blib/lib/HTML/TableContentParser.pm
Manifying blib/man3/HTML::TableContentParser.3
[ERROR] [Sun Feb 17 17:14:51 2008] MAKE TEST failed: Illegal seek
PERL_DL_NONLAZY=1 /export/home/chris/perl5.10.0/bin/perl
"-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1...... Failed 24/34 subtests
Test Summary Report
-------------------
t/1.t (Wstat: 0 Tests: 10 Failed: 0)
Parse errors: Bad plan. You planned 34 tests but ran 10.
Files=1, Tests=10, 0 wallclock secs ( 0.05 usr 0.04 sys + 0.08 cusr 0.05
csys = 0.22 CPU)
Result: FAIL
Failed 1/1 test programs. 0/10 subtests failed.
*** Error code 255
make: Fatal error: Command failed for target `test_dynamic'
[MSG] [Sun Feb 17 17:14:51 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by
POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C
PATH =
/export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin:
PERL5LIB =
:/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/HTML-TableContentParser-0.13/blib/lib:/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/HTML-TableContentParser-0.13/blib/arch:/export/home/chris/perl5.10.0/.cpanplus/5.10.0/build/HTML-TableContentParser-0.13/blib
PERL5_CPANPLUS_IS_RUNNING = 14570
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /export/home/chris/perl5.10.0/bin/perl
UID: $< = 100
EUID: $> = 100
GID: $( = 1 1
EGID: $) = 1 1
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int
uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc '
config_args='-e -Dprefix=/export/home/chris/perl5.10.0 -Dusethreads
-Duse64bitint -Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -DPTR_IS_LONG -fno-strict-aliasing -pipe
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-DPERL_USE_SAFE_PUTENV',
optimize='-O',
cppflags='-D_REENTRANT -DPTR_IS_LONG -fno-strict-aliasing -pipe
-I/usr/local/include'
ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)',
gccosandvers='solaris2.10'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib '
libpth=/usr/local/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lpthread -lc
perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
