This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear EWILHELM,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'fetch':
[MSG] [Mon Feb 18 06:24:50 2008] Trying to get
'http://www.cpan.org/authors/id/E/EW/EWILHELM/CHECKSUMS'
[MSG] [Mon Feb 18 06:24:51 2008] Checksum matches for
'sleepserver-v0.0.1.tar.gz'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver-v0.0.1/'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver-v0.0.1/bin/'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver-v0.0.1/bin/sleepserver'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver-v0.0.1/META.yml'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver-v0.0.1/Changes'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver-v0.0.1/t/'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver-v0.0.1/t/00-load.t'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver-v0.0.1/MANIFEST'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver-v0.0.1/MANIFEST.SKIP'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted
'sleepserver-v0.0.1/.perl_developer.yml'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver-v0.0.1/Build.PL'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver-v0.0.1/README'
[MSG] [Mon Feb 18 06:24:51 2008] Extracted 'sleepserver' to
'/home/cpan/perl562/.cpanplus/5.6.2/build/sleepserver-v0.0.1'
[ERROR] [Mon Feb 18 06:24:51 2008] This module requires 'Module::Build' and
'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back
to 'CPANPLUS::Dist::MM', but might not be able to install!
[MSG] [Mon Feb 18 06:24:51 2008] No 'Makefile.PL' found - attempting to
generate one
[MSG] [Mon Feb 18 06:24:52 2008] Checking if your kit is complete...
Looks good
Writing Makefile for sleepserver
[MSG] [Mon Feb 18 06:24:52 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[ERROR] [Mon Feb 18 06:24:53 2008] MAKE failed: /home/cpan/perl562/bin/perl
"-Iblib/arch" "-Iblib/lib" Build.PL Build
Too early to specify a build action 'Build'. Do 'Build Build' instead.
gmake:
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH =
/home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5_CPANPLUS_IS_EXECUTING =
PERL5_CPANPLUS_IS_RUNNING = 28844
PERL5_CPANPLUS_IS_VERSION = 0.82
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl562/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
Platform:
osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0:
tue oct 31 04:32:05 utc 2006 [EMAIL
PROTECTED]:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop
i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, usemymalloc=n, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib
-L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lc -lposix -lcrypt -lutil -lpthread
perllibs=-lm -lc -lposix -lcrypt -lutil -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared
-L/usr/pkg/lib'
