This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear CHRWIN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Feb 18 14:16:45 2008] Trying to get
'http://www.cpan.org/authors/id/C/CH/CHRWIN/acme-pia-export/Acme-PIA-Export-0.018.tar.gz'
[MSG] [Mon Feb 18 14:16:49 2008] Trying to get
'http://www.cpan.org/authors/id/C/CH/CHRWIN/acme-pia-export/CHECKSUMS'
[MSG] [Mon Feb 18 14:16:49 2008] Checksum matches for
'Acme-PIA-Export-0.018.tar.gz'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme-PIA-Export-0.018/'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted
'Acme-PIA-Export-0.018/Acme-PIA-Export-0.018.html'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme-PIA-Export-0.018/Export.pm'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme-PIA-Export-0.018/INSTALL'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme-PIA-Export-0.018/install.cmd'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme-PIA-Export-0.018/install.sh'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme-PIA-Export-0.018/Makefile.PL'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme-PIA-Export-0.018/MANIFEST'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme-PIA-Export-0.018/META.yml'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme-PIA-Export-0.018/README'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme-PIA-Export-0.018/t/'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme-PIA-Export-0.018/t/001_load.t'
[MSG] [Mon Feb 18 14:16:50 2008] Extracted 'Acme::PIA::Export' to
'/home/chris/blead/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018'
[MSG] [Mon Feb 18 14:16:51 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Acme::PIA::Export
[MSG] [Mon Feb 18 14:16:51 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Mon Feb 18 14:16:56 2008] cp Export.pm blib/lib/Acme/PIA/Export.pm
Manifying blib/man3/Acme::PIA::Export.3
[ERROR] [Mon Feb 18 14:16:59 2008] MAKE TEST failed: Illegal seek
PERL_DL_NONLAZY=1 /home/chris/blead/bin/perl5.11.0 "-MExtUtils::Command::MM"
"-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/001_load......
# Failed test 'use ACME::PIA::Export;'
# at t/001_load.t line 7.
# Tried to use 'ACME::PIA::Export'.
# Error: Can't locate ACME/PIA/Export.pm in @INC (@INC contains:
/home/chris/blead/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib/lib
/home/chris/blead/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib/arch
/home/chris/blead/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib
/home/chris/blead/lib/perl5/5.11.0/alpha-linux-thread-multi
/home/chris/blead/lib/perl5/5.11.0
/home/chris/blead/lib/perl5/site_perl/5.11.0/alpha-linux-thread-multi
/home/chris/blead/lib/perl5/site_perl/5.11.0 .) at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Test Summary Report
-------------------
t/001_load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=1, Tests=1, 0 wallclock secs ( 0.05 usr 0.01 sys + 0.15 cusr 0.02
csys = 0.22 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 1
[MSG] [Mon Feb 18 14:16:59 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
ACME::PIA::Export
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'CHRWIN ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'ACME::PIA::Export' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
IO::Socket 1.30_01 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by
POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games
PERL5LIB =
:/home/chris/blead/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib/lib:/home/chris/blead/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib/arch:/home/chris/blead/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib
PERL5_CPANPLUS_IS_RUNNING = 17665
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/chris/blead/bin/perl5.11.0
UID: $< = 1000
EUID: $> = 1000
GID: $( = 1000 20 24 25 29 44 46 1000
EGID: $) = 1000 20 24 25 29 44 46 1000
-------------------------------
--
Summary of my perl5 (revision 5 version 11 subversion 0 patch 33325)
configuration:
Platform:
osname=linux, osvers=2.6.18-5-alpha-generic,
archname=alpha-linux-thread-multi
uname='linux debbie 2.6.18-5-alpha-generic #1 tue oct 2 23:07:38 utc 2007
alpha gnulinux '
config_args='-e -Dusedevel -Dprefix=/home/chris/blead -Dusethreads
-Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)',
gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
