This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear HANELYP,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_08. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Feb 18 17:38:39 2008] Trying to get
'http://www.cpan.org/authors/id/H/HA/HANELYP/Language-MPI-2008.0215.tar.gz'
[MSG] [Mon Feb 18 17:38:41 2008] Trying to get
'http://www.cpan.org/authors/id/H/HA/HANELYP/CHECKSUMS'
[MSG] [Mon Feb 18 17:38:42 2008] Checksum matches for
'Language-MPI-2008.0215.tar.gz'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted 'Language-MPI-2008.0215/'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted 'Language-MPI-2008.0215/Changes'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted 'Language-MPI-2008.0215/lib/'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted
'Language-MPI-2008.0215/lib/Language/'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted
'Language-MPI-2008.0215/lib/Language/MPI.pm'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted 'Language-MPI-2008.0215/Makefile.PL'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted 'Language-MPI-2008.0215/MANIFEST'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted 'Language-MPI-2008.0215/META.yml'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted 'Language-MPI-2008.0215/README'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted 'Language-MPI-2008.0215/t/'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted 'Language-MPI-2008.0215/t/MPI.t'
[MSG] [Mon Feb 18 17:38:42 2008] Extracted 'Language::MPI' to
'/export/home/chris/perl588/.cpanplus/5.8.8/build/Language-MPI-2008.0215'
[MSG] [Mon Feb 18 17:38:43 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Language::MPI
[MSG] [Mon Feb 18 17:38:43 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Mon Feb 18 17:38:46 2008] cp lib/Language/MPI.pm blib/lib/Language/MPI.pm
Manifying blib/man3/Language::MPI.3
[ERROR] [Mon Feb 18 17:38:47 2008] MAKE TEST failed: Illegal seek
PERL_DL_NONLAZY=1 /export/home/chris/perl588/bin/perl "-MExtUtils::Command::MM"
"-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/MPI......Possible attempt to separate words with commas at
/export/home/chris/perl588/.cpanplus/5.8.8/build/Language-MPI-2008.0215/blib/lib/Language/MPI.pm
line 123.
'$VERSION,' is not a valid variable name under strict vars at
/export/home/chris/perl588/.cpanplus/5.8.8/build/Language-MPI-2008.0215/blib/lib/Language/MPI.pm
line 123
BEGIN failed--compilation aborted at
/export/home/chris/perl588/.cpanplus/5.8.8/build/Language-MPI-2008.0215/blib/lib/Language/MPI.pm
line 123.
Compilation failed in require at t/MPI.t line 15.
BEGIN failed--compilation aborted at t/MPI.t line 15.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Test Summary Report
-------------------
t/MPI.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 1 tests but ran 0.
Files=1, Tests=0, 0 wallclock secs ( 0.04 usr 0.03 sys + 0.07 cusr 0.04
csys = 0.18 CPU)
Result: FAIL
Failed 1/1 test programs. 0/0 subtests failed.
*** Error code 29
make: Fatal error: Command failed for target `test_dynamic'
[MSG] [Mon Feb 18 17:38:47 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by
POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C
PATH =
/export/home/chris/perl/bin:/usr/sfw/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin:
PERL5LIB =
:/export/home/chris/perl588/.cpanplus/5.8.8/build/Language-MPI-2008.0215/blib/lib:/export/home/chris/perl588/.cpanplus/5.8.8/build/Language-MPI-2008.0215/blib/arch:/export/home/chris/perl588/.cpanplus/5.8.8/build/Language-MPI-2008.0215/blib
PERL5_CPANPLUS_IS_RUNNING = 27080
PERL5_CPANPLUS_IS_VERSION = 0.83_08
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /export/home/chris/perl588/bin/perl
UID: $< = 100
EUID: $> = 100
GID: $( = 1 1
EGID: $) = 1 1
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int
uname='sunos soleil 5.10 generic_118855-33 i86pc i386 i86pc '
config_args='-e -Dprefix=/export/home/chris/perl588 -Dusethreads
-Duse64bitint -Dusemymalloc'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe
-Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV
-DPERL_USE_SAFE_PUTENV',
optimize='-O',
cppflags='-D_REENTRANT -fno-strict-aliasing -pipe
-Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)',
gccosandvers='solaris2.10'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib '
libpth=/usr/local/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lpthread -lc
perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
