This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear JDHEDDEN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Feb 18 18:11:13 2008] Trying to get
'http://www.cpan.org/authors/id/J/JD/JDHEDDEN/Thread-Semaphore-2.02.tar.gz'
[MSG] [Mon Feb 18 18:11:17 2008] Trying to get
'http://www.cpan.org/authors/id/J/JD/JDHEDDEN/CHECKSUMS'
[MSG] [Mon Feb 18 18:11:19 2008] Checksum matches for
'Thread-Semaphore-2.02.tar.gz'
[MSG] [Mon Feb 18 18:11:19 2008] Extracted 'Thread-Semaphore-2.02/'
[MSG] [Mon Feb 18 18:11:19 2008] Extracted 'Thread-Semaphore-2.02/Changes'
[MSG] [Mon Feb 18 18:11:19 2008] Extracted 'Thread-Semaphore-2.02/examples/'
[MSG] [Mon Feb 18 18:11:19 2008] Extracted
'Thread-Semaphore-2.02/examples/semaphore.pl'
[MSG] [Mon Feb 18 18:11:19 2008] Extracted 'Thread-Semaphore-2.02/lib/'
[MSG] [Mon Feb 18 18:11:19 2008] Extracted 'Thread-Semaphore-2.02/lib/Thread/'
[MSG] [Mon Feb 18 18:11:19 2008] Extracted
'Thread-Semaphore-2.02/lib/Thread/Semaphore.pm'
[MSG] [Mon Feb 18 18:11:19 2008] Extracted 'Thread-Semaphore-2.02/Makefile.PL'
[MSG] [Mon Feb 18 18:11:20 2008] Extracted 'Thread-Semaphore-2.02/MANIFEST'
[MSG] [Mon Feb 18 18:11:20 2008] Extracted 'Thread-Semaphore-2.02/META.yml'
[MSG] [Mon Feb 18 18:11:20 2008] Extracted 'Thread-Semaphore-2.02/README'
[MSG] [Mon Feb 18 18:11:20 2008] Extracted 'Thread-Semaphore-2.02/t/'
[MSG] [Mon Feb 18 18:11:20 2008] Extracted 'Thread-Semaphore-2.02/t/00_load.t'
[MSG] [Mon Feb 18 18:11:20 2008] Extracted 'Thread-Semaphore-2.02/t/01_basic.t'
[MSG] [Mon Feb 18 18:11:20 2008] Extracted 'Thread-Semaphore-2.02/t/02_errs.t'
[MSG] [Mon Feb 18 18:11:20 2008] Extracted 'Thread-Semaphore-2.02/t/99_pod.t'
[MSG] [Mon Feb 18 18:11:20 2008] Extracted 'Thread::Semaphore' to
'/home/chris/blead/.cpanplus/5.11.0/build/Thread-Semaphore-2.02'
[MSG] [Mon Feb 18 18:11:21 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Thread::Semaphore
[MSG] [Mon Feb 18 18:11:21 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Mon Feb 18 18:11:26 2008] cp lib/Thread/Semaphore.pm
blib/lib/Thread/Semaphore.pm
Manifying blib/man3/Thread::Semaphore.3
[ERROR] [Mon Feb 18 18:11:29 2008] MAKE TEST failed: Illegal seek
PERL_DL_NONLAZY=1 /home/chris/blead/bin/perl5.11.0 "-MExtUtils::Command::MM"
"-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_load.......# Testing Thread::Semaphore 2.02
ok
t/01_basic......
# Failed test 'Thread 1 done'
# at t/01_basic.t line 38.
# got: '3'
# expected: '5'
# Failed test 'Main re-got semaphore'
# at t/01_basic.t line 62.
# got: '3'
# expected: '4'
# Failed test 'Thread 2 got semaphore'
# at t/01_basic.t line 44.
# got: '4'
# expected: '3'
# Looks like you failed 3 tests of 10.
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/10 subtests
t/02_errs.......ok
t/99_pod........skipped: Module maintainer tests
Test Summary Report
-------------------
t/01_basic.t (Wstat: 768 Tests: 10 Failed: 3)
Failed tests: 6-8
Non-zero exit status: 3
Files=4, Tests=23, 1 wallclock secs ( 0.12 usr 0.01 sys + 0.70 cusr 0.09
csys = 0.92 CPU)
Result: FAIL
Failed 1/4 test programs. 3/23 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Mon Feb 18 18:11:30 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Scalar::Util 1.19 1.1
Test::More 0.74 0.5
threads 1.67 0
threads::shared 1.15 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by
POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
PATH = /usr/local/bin:/usr/bin:/bin:/usr/games
PERL5LIB =
:/home/chris/blead/.cpanplus/5.11.0/build/Thread-Semaphore-2.02/blib/lib:/home/chris/blead/.cpanplus/5.11.0/build/Thread-Semaphore-2.02/blib/arch:/home/chris/blead/.cpanplus/5.11.0/build/Thread-Semaphore-2.02/blib
PERL5_CPANPLUS_IS_RUNNING = 17155
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/chris/blead/bin/perl5.11.0
UID: $< = 1000
EUID: $> = 1000
GID: $( = 1000 20 24 25 29 44 46 1000
EGID: $) = 1000 20 24 25 29 44 46 1000
-------------------------------
--
Summary of my perl5 (revision 5 version 11 subversion 0 patch 33325)
configuration:
Platform:
osname=linux, osvers=2.6.18-5-alpha-generic,
archname=alpha-linux-thread-multi
uname='linux debbie 2.6.18-5-alpha-generic #1 tue oct 2 23:07:38 utc 2007
alpha gnulinux '
config_args='-e -Dusedevel -Dprefix=/home/chris/blead -Dusethreads
-Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)',
gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
