This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear CHRWIN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Feb 18 18:10:29 2008] Trying to get
'http://www.cpan.org/authors/id/C/CH/CHRWIN/acme-pia-export/Acme-PIA-Export-0.018.tar.gz'
[MSG] [Mon Feb 18 18:10:30 2008] Trying to get
'http://www.cpan.org/authors/id/C/CH/CHRWIN/acme-pia-export/CHECKSUMS'
[MSG] [Mon Feb 18 18:10:30 2008] Checksum matches for
'Acme-PIA-Export-0.018.tar.gz'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme-PIA-Export-0.018/'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted
'Acme-PIA-Export-0.018/Acme-PIA-Export-0.018.html'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme-PIA-Export-0.018/Export.pm'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme-PIA-Export-0.018/INSTALL'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme-PIA-Export-0.018/install.cmd'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme-PIA-Export-0.018/install.sh'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme-PIA-Export-0.018/Makefile.PL'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme-PIA-Export-0.018/MANIFEST'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme-PIA-Export-0.018/META.yml'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme-PIA-Export-0.018/README'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme-PIA-Export-0.018/t/'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme-PIA-Export-0.018/t/001_load.t'
[MSG] [Mon Feb 18 18:10:30 2008] Extracted 'Acme::PIA::Export' to
'/home/cpantester/perl511/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018'
[MSG] [Mon Feb 18 18:10:30 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Acme::PIA::Export
[MSG] [Mon Feb 18 18:10:30 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING
'sub return value'
[MSG] [Mon Feb 18 18:10:31 2008] cp Export.pm blib/lib/Acme/PIA/Export.pm
Manifying blib/man3/Acme::PIA::Export.3
[ERROR] [Mon Feb 18 18:10:31 2008] MAKE TEST failed: Illegal seek
PERL_DL_NONLAZY=1 /home/cpantester/perl511/bin/perl "-MExtUtils::Command::MM"
"-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/001_load......
# Failed test 'use ACME::PIA::Export;'
# at t/001_load.t line 7.
# Tried to use 'ACME::PIA::Export'.
# Error: Can't locate ACME/PIA/Export.pm in @INC (@INC contains:
/home/cpantester/perl511/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib/lib
/home/cpantester/perl511/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib/arch
/home/cpantester/lib
/home/cpantester/perl511/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib/lib
/home/cpantester/perl511/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib/arch
/home/cpantester/perl511/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib
/home/cpantester/perl511/lib/5.11.0/x86_64-linux-thread-multi-ld
/home/cpantester/perl511/lib/5.11.0
/home/cpantester/perl511/lib/site_perl/5.11.0/x86_64-linux-thread-multi-ld
/home/cpantester/perl511/lib/site_perl/5.11.0 .) at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
Test Summary Report
-------------------
t/001_load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=1, Tests=1, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.02 cusr 0.00
csys = 0.03 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 1
[MSG] [Mon Feb 18 18:10:31 2008] DEFAULT 'proceed_on_test_failure' HANDLER
RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
ACME::PIA::Export
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'CHRWIN ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'ACME::PIA::Export' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
IO::Socket 1.30_01 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = C
PATH = /home/cpantester/bin:/usr/local/bin:/usr/bin:/bin:/usr/games
PERL5LIB =
/home/cpantester/lib:/home/cpantester/perl511/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib/lib:/home/cpantester/perl511/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib/arch:/home/cpantester/perl511/.cpanplus/5.11.0/build/Acme-PIA-Export-0.018/blib
PERL5_CPANPLUS_IS_RUNNING = 25197
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpantester/perl511/bin/perl
UID: $< = 1001
EUID: $> = 1001
GID: $( = 1002 1002
EGID: $) = 1002 1002
-------------------------------
--
Summary of my perl5 (revision 5 version 11 subversion 0 patch 33333)
configuration:
Platform:
osname=linux, osvers=2.6.22-3-amd64, archname=x86_64-linux-thread-multi-ld
uname='linux zippy 2.6.22-3-amd64 #1 smp sun nov 4 18:18:09 utc 2007 x86_64
gnulinux '
config_args='-D prefix=/home/cpantester/perl511/ -Dusethreads -Duse64bitall
-Dusedevel -des'
hint=previous, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include -D_REENTRANT -D_GNU_SOURCE
-fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
ccversion='', gccversion='4.2.3 (Debian 4.2.3-1)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t',
lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
