This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to [EMAIL PROTECTED] to keep other
test volunteers informed and to prevent any duplicate effort.
--
This is an error report generated automatically by CPANPLUS,
version 0.048.
Below is the error stack during 'make test':
PERL_DL_NONLAZY=1 /home/nothingmuch/perlsmoke/build/devel-thread/bin/perl
"-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/0-DBIx-DBH....Can't locate DBI.pm in @INC (@INC contains:
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/lib
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/arch
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl .
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/not
hingmuch/perlsmoke/build/devel-thread/lib/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl .) at
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/lib/DBIx/DBH.pm
line 9.
BEGIN failed--compilation aborted at
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/lib/DBIx/DBH.pm
line 9.
Compilation failed in require at t/0-DBIx-DBH.t line 11.
BEGIN failed--compilation aborted at t/0-DBIx-DBH.t line 11.
# Looks like your test died before it could output anything.
dubious
Test returned status 255 (wstat 65280, 0xff00)
t/1-attr........Can't locate DBI.pm in @INC (@INC contains:
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/lib
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/arch
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl .
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/not
hingmuch/perlsmoke/build/devel-thread/lib/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl .) at
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/lib/DBIx/DBH.pm
line 9.
BEGIN failed--compilation aborted at
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/lib/DBIx/DBH.pm
line 9.
Compilation failed in require at t/1-attr.t line 11.
BEGIN failed--compilation aborted at t/1-attr.t line 11.
# Looks like your test died before it could output anything.
dubious
Test returned status 255 (wstat 65280, 0xff00)
t/mysql.........Can't locate DBI.pm in @INC (@INC contains:
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/lib
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/arch
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl .
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/not
hingmuch/perlsmoke/build/devel-thread/lib/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl .) at
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/lib/DBIx/DBH.pm
line 9.
BEGIN failed--compilation aborted at
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/lib/DBIx/DBH.pm
line 9.
Compilation failed in require at t/mysql.t line 11.
BEGIN failed--compilation aborted at t/mysql.t line 11.
# Looks like your test died before it could output anything.
dubious
Test returned status 255 (wstat 65280, 0xff00)
t/Pg............
# Failed test (t/Pg.t at line 13)
# Tried to use 'DBIx::DBH'.
# Error: Can't locate DBI.pm in @INC (@INC contains:
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/lib
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/arch
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl .
/home/nothingmuch/perlsmoke/build/devel-thread/lib/5.9.2/i686-linux-thread-multi
/home/nothi
ngmuch/perlsmoke/build/devel-thread/lib/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2/i686-linux-thread-multi
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl/5.9.2
/home/nothingmuch/perlsmoke/build/devel-thread/lib/site_perl .) at
/home/.perlsmoke/devel-thread/.cpanplus/5.9.2/build/DBIx-DBH-0.03/blib/lib/DBIx/DBH.pm
line 9.
# BEGIN failed--compilation aborted at t/Pg.t line 13.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Can't locate object method "form_dsn" via package "DBIx::DBH" at t/Pg.t line 33.
# Looks like you failed 1 test of 1.
# Looks like your test died just after 1.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
Failed 4/4 test scripts, 0.00% okay. 1/1 subtests failed, 0.00% okay.
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/0-DBIx-DBH.t 255 65280 ?? ?? % ??
t/1-attr.t 255 65280 ?? ?? % ??
t/Pg.t 255 65280 1 1 100.00% 1
t/mysql.t 255 65280 ?? ?? % ??
make: *** [test_dynamic] Error 2
Additional comments:
Hello, Terrence Brannon! Thanks for uploading your works to CPAN.
I noticed that the test suite seem to fail without these modules:
DBI
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'Terrence Brannon ([EMAIL PROTECTED])',
... # other information
PREREQ_PM => {
'DBI' => '0', # or a minimum workable version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. Also, because many people perform automatic
tests on CPAN, chances are that you will receive identical messages
about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional information, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
--
Summary of my perl5 (revision 5 version 9 subversion 2 patch 23566)
configuration:
Platform:
osname=linux, osvers=2.6.8.1, archname=i686-linux-thread-multi
uname='linux pasta 2.6.8.1 #4 sat aug 21 18:43:24 idt 2004 i686 amd
athlon(tm) xp 2400+ authenticamd gnulinux '
config_args='-des -Dprefix=/home/nothingmuch/perlsmoke/build/devel-thread
-Dusedevel -Uversiononly -Dusethreads [EMAIL PROTECTED]'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS
-fno-strict-aliasing -pipe'
ccversion='', gccversion='3.3.4 20040623 (Gentoo Linux 3.3.4-r1,
ssp-3.3.2-2, pie-8.7.6)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t',
lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lndbm -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.3.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.3'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
