This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

******************************** NOTE ********************************
The comments below are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional information, and do not take
it personally.  (We appreciate your patience. :)
**********************************************************************

Hello, Richard Soderberg! This is a computer-generated error report created
automatically by CPANPLUS, version 0.050_04.  
Comments from the tester may appear at the end of this report, as well.


Thanks for uploading your works to CPAN.  However, it appears that
CPANPLUS encountered problems while testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'fetch':

[MSG] [Thu Dec 30 01:14:42 2004] Trying to get 
'ftp://ftp.cpan.org/pub/CPAN/authors/id/R/RS/RSOD/Object-Accessor-XS-0.03.tar.gz'
[MSG] [Thu Dec 30 01:14:44 2004] Trying to get 
'ftp://ftp.cpan.org/pub/CPAN/authors/id/R/RS/RSOD/CHECKSUMS'
[MSG] [Thu Dec 30 01:14:45 2004] Checksum matches for 
'Object-Accessor-XS-0.03.tar.gz'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 'Object-Accessor-XS-0.03/'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 'Object-Accessor-XS-0.03/Makefile.PL'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 'Object-Accessor-XS-0.03/MANIFEST'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 'Object-Accessor-XS-0.03/META.yml'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 'Object-Accessor-XS-0.03/ppport.h'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 'Object-Accessor-XS-0.03/README'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 'Object-Accessor-XS-0.03/SIGNATURE'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 'Object-Accessor-XS-0.03/t/'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 
'Object-Accessor-XS-0.03/t/00_Object-Accessor.t'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 
'Object-Accessor-XS-0.03/t/01_Object-Accessor-Subclassed.t'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 'Object-Accessor-XS-0.03/XS.pm'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 'Object-Accessor-XS-0.03/XS.xs'
[MSG] [Thu Dec 30 01:14:45 2004] Extracted 'Object::Accessor::XS' to 
'C:\Documents and Settings\Rob.MAGNETO-XP\Application 
Data\.cpanplus\5.8.4\build\Object-Accessor-XS-0.03'
[MSG] [Thu Dec 30 01:14:48 2004] Module 'Object::Accessor::XS' requires 
'Object::Accessor' version '0.03' to be installed 
[MSG] [Thu Dec 30 01:15:00 2004] Trying to get 
'ftp://ftp.cpan.org/pub/CPAN/authors/id/K/KA/KANE/Object-Accessor-0.03.tar.gz'
[MSG] [Thu Dec 30 01:15:01 2004] Trying to get 
'ftp://ftp.cpan.org/pub/CPAN/authors/id/K/KA/KANE/CHECKSUMS'
[MSG] [Thu Dec 30 01:15:03 2004] Checksum matches for 
'Object-Accessor-0.03.tar.gz'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 'Object-Accessor-0.03/'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 'Object-Accessor-0.03/lib/'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 'Object-Accessor-0.03/lib/Object/'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 
'Object-Accessor-0.03/lib/Object/Accessor.pm'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 'Object-Accessor-0.03/Makefile.PL'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 'Object-Accessor-0.03/MANIFEST'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 'Object-Accessor-0.03/META.yml'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 'Object-Accessor-0.03/README'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 'Object-Accessor-0.03/t/'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 
'Object-Accessor-0.03/t/00_Object-Accessor.t'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 
'Object-Accessor-0.03/t/01_Object-Accessor-Subclassed.t'
[MSG] [Thu Dec 30 01:15:04 2004] Extracted 'Object::Accessor' to 'C:\Documents 
and Settings\Rob.MAGNETO-XP\Application 
Data\.cpanplus\5.8.4\build\Object-Accessor-0.03'
[MSG] [Thu Dec 30 01:15:25 2004] Successfully sent report for 
'Object-Accessor-0.03'
[ERROR] [Thu Dec 30 01:15:34 2004] MAKE failed: No such file or directory cp 
XS.pm blib\lib\Object\Accessor\XS.pm
        C:\Perl\bin\perl.exe C:\Perl\lib\ExtUtils/xsubpp  -typemap 
C:\Perl\lib\ExtUtils\typemap  XS.xs > XS.xsc && C:\Perl\bin\perl.exe 
-MExtUtils::Command -e mv XS.xsc XS.c
        cl -c  -I.  -nologo -Gf -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE 
-DNO_STRICT -DHAVE_DES_FCRYPT -DNO_HASH_SEED -DPERL_IMPLICIT_CONTEXT 
-DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX -MD -Zi -DNDEBUG -O1    
-DVERSION=\"0.03\"  -DXS_VERSION=\"0.03\"  "-IC:\Perl\lib\CORE"   XS.c
XS.c
c1 : warning C4349: /Gf is deprecated and will not be supported in future 
versions of Visual C++; remove /Gf or use /GF instead
XS.c(25) : warning C4101: 'RETVAL' : unreferenced local variable
XS.xs(30) : error C2275: 'SV' : illegal use of this type as an expression
        C:\Perl\lib\CORE\perl.h(1774) : see declaration of 'SV'
XS.xs(30) : error C2065: 'carplevel' : undeclared identifier
XS.xs(31) : warning C4047: 'function' : 'SV *' differs in levels of indirection 
from 'int'
XS.xs(32) : warning C4047: 'function' : 'SV *' differs in levels of indirection 
from 'int'
XS.xs(72) : error C2275: 'IV' : illegal use of this type as an expression
        C:\Perl\lib\CORE\perl.h(1078) : see declaration of 'IV'
XS.xs(72) : error C2146: syntax error : missing ';' before identifier 'i'
XS.xs(72) : error C2144: syntax error : '<Unknown>' should be preceded by 
'<Unknown>'
XS.xs(72) : error C2144: syntax error : '<Unknown>' should be preceded by 
'<Unknown>'
XS.xs(72) : error C2143: syntax error : missing ';' before 'identifier'
XS.xs(72) : error C2065: 'i' : undeclared identifier
XS.xs(72) : error C2275: 'HE' : illegal use of this type as an expression
        c:\Perl\lib\CORE\hv.h(12) : see declaration of 'HE'
XS.xs(72) : error C2065: 'element' : undeclared identifier
XS.xs(73) : warning C4047: '=' : 'int' differs in levels of indirection from 
'HE *'
XS.xs(74) : warning C4047: 'function' : 'HE *' differs in levels of indirection 
from 'int'
XS.xs(92) : error C2275: 'HE' : illegal use of this type as an expression
        c:\Perl\lib\CORE\hv.h(12) : see declaration of 'HE'
XS.xs(92) : error C2065: 'iter' : undeclared identifier
XS.xs(92) : error C2275: 'SV' : illegal use of this type as an expression
        C:\Perl\lib\CORE\perl.h(1774) : see declaration of 'SV'
XS.xs(92) : error C2065: 'key' : undeclared identifier
XS.xs(93) : warning C4047: '=' : 'int' differs in levels of indirection from 
'HE *'
XS.xs(94) : warning C4047: 'function' : 'HE *' differs in levels of indirection 
from 'int'
XS.xs(94) : warning C4047: '=' : 'int' differs in levels of indirection from 
'SV *'
XS.xs(96) : warning C4047: 'function' : 'SV *' differs in levels of indirection 
from 'int'
XS.xs(100) : error C2275: 'IV' : illegal use of this type as an expression
        C:\Perl\lib\CORE\perl.h(1078) : see declaration of 'IV'
XS.xs(100) : error C2146: syntax error : missing ';' before identifier 'i'
XS.xs(100) : error C2144: syntax error : '<Unknown>' should be preceded by 
'<Unknown>'
XS.xs(100) : error C2144: syntax error : '<Unknown>' should be preceded by 
'<Unknown>'
XS.xs(100) : error C2143: syntax error : missing ';' before 'identifier'
XS.xs(100) : error C2275: 'IV' : illegal use of this type as an expression
        C:\Perl\lib\CORE\perl.h(1078) : see declaration of 'IV'
XS.xs(100) : error C2146: syntax error : missing ';' before identifier 'len'
XS.xs(100) : error C2144: syntax error : '<Unknown>' should be preceded by 
'<Unknown>'
XS.xs(100) : error C2144: syntax error : '<Unknown>' should be preceded by 
'<Unknown>'
XS.xs(100) : error C2143: syntax error : missing ';' before 'identifier'
XS.xs(100) : error C2065: 'len' : undeclared identifier

Microsoft (R) Program Maintenance Utility   Version 1.50
Copyright (c) Microsoft Corp 1988-94. All rights reserved.

NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return code '0x2'
Stop.


--

Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
  Platform:
    osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
    uname=''
    config_args='undef'
    hint=recommended, useposix=true, d_sigaction=undef
    usethreads=undef use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cl', ccflags ='-nologo -Gf -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE 
-DNO_STRICT -DHAVE_DES_FCRYPT  -DNO_HASH_SEED -DPERL_IMPLICIT_CONTEXT 
-DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX',
    optimize='-MD -Zi -DNDEBUG -O1',
    cppflags='-DWIN32'
    ccversion='', gccversion='', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', 
lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf  
-libpath:"C:\Perl\lib\CORE"  -machine:x86'
    libpth=C:\PROGRA~1\MICROS~3\VC98\lib
    libs=  oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib  
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib  netapi32.lib 
uuid.lib wsock32.lib mpr.lib winmm.lib  version.lib odbc32.lib odbccp32.lib 
msvcrt.lib
    perllibs=  oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib  
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib  netapi32.lib 
uuid.lib wsock32.lib mpr.lib winmm.lib  version.lib odbc32.lib odbccp32.lib 
msvcrt.lib
    libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib
    gnulibc_version='undef'
  Dynamic Linking:
    dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf  
-libpath:"C:\Perl\lib\CORE"  -machine:x86'

Reply via email to