This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- ******************************** NOTE ******************************** The comments below are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional information, and do not take it personally. (We appreciate your patience. :) ********************************************************************** Hello, PATL! This is a computer-generated error report created automatically by CPANPLUS, version 0.050_04. Comments from the tester may appear at the end of this report, as well. Thanks for uploading your works to CPAN. However, it appears that CPANPLUS encountered problems while testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Wed Jan 5 16:35:00 2005] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/P/PA/PATL/Time-Out-0.02.tar.gz' [MSG] [Wed Jan 5 16:35:04 2005] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/P/PA/PATL/CHECKSUMS' [MSG] [Wed Jan 5 16:35:07 2005] Checksum matches for 'Time-Out-0.02.tar.gz' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time-Out-0.02/' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time-Out-0.02/Out.pod' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time-Out-0.02/Changes' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time-Out-0.02/Out.pm' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time-Out-0.02/t/' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time-Out-0.02/t/02_usage.t' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time-Out-0.02/t/01_init.t' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time-Out-0.02/t/03_exceptions.t' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time-Out-0.02/MANIFEST' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time-Out-0.02/Makefile.PL' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time-Out-0.02/README' [MSG] [Wed Jan 5 16:35:08 2005] Extracted 'Time::Out' to 'C:\Documents and Settings\Rob.MAGNETO-XP\Application Data\.cpanplus\5.8.4\build\Time-Out-0.02' [ERROR] [Wed Jan 5 16:35:13 2005] MAKE TEST failed: No such file or directory C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t\01_init.t t\02_usage.t t\03_exceptions.t t\01_init..........ok t\02_usage.........dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-7 Failed 7/7 tests, 0.00% okay t\03_exceptions....dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED tests 1-3 Failed 3/3 tests, 0.00% okay Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t\02_usage.t 255 65280 7 14 200.00% 1-7 t\03_exceptions.t 255 65280 3 4 133.33% 1-3 Microsoft (R) Program Maintenance Utility Version 1.50 Copyright (c) Microsoft Corp 1988-94. All rights reserved. Scalar value @_[0] better written as $_[0] at t\02_usage.t line 29. Scalar value @_[0] better written as $_[0] at t\02_usage.t line 37. alarm is not a valid Time::HiRes macro at C:/Perl/lib/Time/HiRes.pm line 27. # Test 1 got: "alarm is not a valid Time::HiRes macro at C:/Perl/lib/Time/HiRes.pm line 27.\n" (t\03_exceptions.t at line 17) # Expected: "allo\n" # t\03_exceptions.t line 17 is: ok($@, "allo\n") ; # Test 2 got: "alarm is not a valid Time::HiRes macro at C:/Perl/lib/Time/HiRes.pm line 27.\n" (t\03_exceptions.t at line 26) # Expected: "(?-xism:^allo)" # t\03_exceptions.t line 26 is: ok($@, qr/^allo/) ; Can't use string ("alarm is not a valid Time::HiRes") as an ARRAY ref while "strict refs" in use at t\03_exceptions.t line 35. Failed 2/3 test scripts, 33.33% okay. 10/11 subtests failed, 9.09% okay. NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return code '0x2' Stop. -- Summary of my perl5 (revision 5 version 8 subversion 4) configuration: Platform: osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread uname='' config_args='undef' hint=recommended, useposix=true, d_sigaction=undef usethreads=undef use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cl', ccflags ='-nologo -Gf -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DNO_HASH_SEED -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX', optimize='-MD -Zi -DNDEBUG -O1', cppflags='-DWIN32' ccversion='', gccversion='', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86' libpth=C:\PROGRA~1\MICROS~3\VC98\lib libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib gnulibc_version='undef' Dynamic Linking: dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86'
