This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- ******************************** NOTE ******************************** The comments below are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional information, and do not take it personally. (We appreciate your patience. :) ********************************************************************** Hello, JMASON! This is a computer-generated error report created automatically by CPANPLUS, version 0.051. Comments from the tester may appear at the end of this report, as well. Thanks for uploading your works to CPAN. However, it appears that CPANPLUS encountered problems while testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Thu Jan 20 11:33:12 2005] Trying to get 'ftp://cpan.etla.org/pub/CPAN/authors/id/J/JM/JMASON/IPC-DirQueue-0.04.tar.gz' [MSG] [Thu Jan 20 11:33:12 2005] Trying to get 'ftp://cpan.etla.org/pub/CPAN/authors/id/J/JM/JMASON/CHECKSUMS' [MSG] [Thu Jan 20 11:33:13 2005] Checksum matches for 'IPC-DirQueue-0.04.tar.gz' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/long-tests/' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/long-tests/run-bigstress' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/long-tests/90bigstress.t' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/dq-submit' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/BUGS' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/dq-list' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/MANIFEST' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/TODO' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/t/' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/t/80stress.t' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/t/80stress_unordered.t' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/t/00basic.t' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/t/20cmdline.t' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/t/10enq_string.t' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/MANIFEST.SKIP' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/lib/' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/lib/IPC/' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/lib/IPC/DirQueue.pm' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/lib/IPC/DirQueue/' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/lib/IPC/DirQueue/Job.pm' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/CHANGES' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/dq-deque' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/dq-server' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC-DirQueue-0.04/Makefile.PL' [MSG] [Thu Jan 20 11:33:14 2005] Extracted 'IPC::DirQueue' to 'C:\Documents and Settings\Rob.MAGNETO-XP\Application Data\.cpanplus\5.8.6\build\IPC-DirQueue-0.04' [ERROR] [Thu Jan 20 12:00:58 2005] MAKE TEST failed: No such file or directory C:\Perl\bin\perl.exe -MExtUtils::Command -e cp dq-list blib\script\dq-list pl2bat.bat blib\script\dq-list C:\Perl\bin\perl.exe -MExtUtils::Command -e cp dq-deque blib\script\dq-deque pl2bat.bat blib\script\dq-deque C:\Perl\bin\perl.exe -MExtUtils::Command -e cp dq-submit blib\script\dq-submit pl2bat.bat blib\script\dq-submit C:\Perl\bin\perl.exe -MExtUtils::Command -e cp dq-server blib\script\dq-server pl2bat.bat blib\script\dq-server C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t\00basic.t t\10enq_string.t t\20cmdline.t t\80stress.t t\80stress_unordered.t t\00basic...............ok t\10enq_string..........ok t\20cmdline.............skipped all skipped: no reason given t\80stress..............dubious Test returned status 15 (wstat 3840, 0xf00) DIED. FAILED tests 108-113 Failed 6/113 tests, 94.69% okay t\80stress_unordered....dubious Test returned status 15 (wstat 3840, 0xf00) DIED. FAILED tests 108-113 Failed 6/113 tests, 94.69% okay Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t\80stress.t 15 3840 113 12 10.62% 108-113 t\80stress_unordered.t 15 3840 113 12 10.62% 108-113 1 test skipped. Microsoft (R) Program Maintenance Utility Version 1.50 Copyright (c) Microsoft Corp 1988-94. All rights reserved. Terminating on signal SIGTERM(15) Terminating on signal SIGTERM(15) Failed 2/5 test scripts, 60.00% okay. 12/928 subtests failed, 98.71% okay. NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return code '0x2' Stop. -- Summary of my perl5 (revision 5 version 8 subversion 6) configuration: Platform: osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread uname='' config_args='undef' hint=recommended, useposix=true, d_sigaction=undef usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cl', ccflags ='-nologo -Gf -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DNO_HASH_SEED -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX', optimize='-MD -Zi -DNDEBUG -O1', cppflags='-DWIN32' ccversion='', gccversion='', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86' libpth=\lib libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib gnulibc_version='undef' Dynamic Linking: dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86'
