This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

******************************** NOTE ********************************
The comments below are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional information, and do not take
it personally.  (We appreciate your patience. :)
**********************************************************************

Hello, NICOLAW! This is a computer-generated error report created
automatically by CPANPLUS, version 0.051.  
Comments from the tester may appear at the end of this report, as well.


Thanks for uploading your works to CPAN.  However, it appears that
CPANPLUS encountered problems while testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu Jan 20 15:55:33 2005] Trying to get 
'ftp://cpan.etla.org/pub/CPAN/authors/id/N/NI/NICOLAW/Sys-Filesystem-1.12.tar.gz'
[MSG] [Thu Jan 20 15:55:34 2005] Trying to get 
'ftp://cpan.etla.org/pub/CPAN/authors/id/N/NI/NICOLAW/CHECKSUMS'
[MSG] [Thu Jan 20 15:55:35 2005] Checksum matches for 
'Sys-Filesystem-1.12.tar.gz'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/lib/'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/lib/Sys/'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 
'Sys-Filesystem-1.12/lib/Sys/Filesystem.pm'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 
'Sys-Filesystem-1.12/lib/Sys/Filesystem/'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 
'Sys-Filesystem-1.12/lib/Sys/Filesystem/Dummy.pm'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 
'Sys-Filesystem-1.12/lib/Sys/Filesystem/Darwin.pm'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 
'Sys-Filesystem-1.12/lib/Sys/Filesystem/Unix.pm'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 
'Sys-Filesystem-1.12/lib/Sys/Filesystem/Linux.pm'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 
'Sys-Filesystem-1.12/lib/Sys/Filesystem/Win32.pm'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 
'Sys-Filesystem-1.12/lib/Sys/Filesystem/Solaris.pm'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 
'Sys-Filesystem-1.12/lib/Sys/Filesystem/Cygwin.pm'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/Changes'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/COPYING'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/t/'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/t/01test.t'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/MANIFEST'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/TODO'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/META.yml'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/INSTALL'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/README'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys-Filesystem-1.12/Makefile.PL'
[MSG] [Thu Jan 20 15:55:36 2005] Extracted 'Sys::Filesystem' to 'C:\Documents 
and Settings\Rob.MAGNETO-XP\Application 
Data\.cpanplus\5.8.6\build\Sys-Filesystem-1.12'
[ERROR] [Thu Jan 20 15:55:59 2005] MAKE TEST failed: No such file or directory  
C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 
'blib\lib', 'blib\arch')" t\01test.t
t\01test....dubious
        Test returned status 5 (wstat 1280, 0x500)
DIED. FAILED tests 2-6
        Failed 5/6 tests, 16.67% okay
Failed Test Stat Wstat Total Fail  Failed  List of Failed
-------------------------------------------------------------------------------
t\01test.t     5  1280     6    5  83.33%  2-6

Microsoft (R) Program Maintenance Utility   Version 1.50
Copyright (c) Microsoft Corp 1988-94. All rights reserved.

Can't locate Sys/Filesystem/MSWin32.pm in @INC (@INC contains: ./lib ../lib 
C:\Documents and Settings\Rob.MAGNETO-XP\Application 
Data\.cpanplus\5.8.6\build\Sys-Filesystem-1.12\blib\lib C:\Documents and 
Settings\Rob.MAGNETO-XP\Application 
Data\.cpanplus\5.8.6\build\Sys-Filesystem-1.12\blib\arch C:\Documents and 
Settings\Rob.MAGNETO-XP\Application 
Data\.cpanplus\5.8.6\build\Config-YAML-1.37\blib\lib C:\Documents and 
Settings\Rob.MAGNETO-XP\Application 
Data\.cpanplus\5.8.6\build\Arch-0.4.1\blib\lib C:\Documents and 
Settings\Rob.MAGNETO-XP\Application 
Data\.cpanplus\5.8.6\build\Log-Log4perl-0.51\blib\lib C:\Documents and 
Settings\Rob.MAGNETO-XP\Application 
Data\.cpanplus\5.8.6\build\Sysadm-Install-0.11\blib\lib C:\Documents and 
Settings\Rob.MAGNETO-XP\Application 
Data\.cpanplus\5.8.6\build\Net-Address-Ethernet-1.066\blib\lib C:/Perl/lib 
C:/Perl/site/lib .) at (eval 5) line 1.
 at lib/Sys/Filesystem.pm line 54
        Sys::Filesystem::new('Sys::Filesystem') called at t\01test.t line 9
#     Failed test (t\01test.t at line 11)
#     Failed test (t\01test.t at line 12)
#     Failed test (t\01test.t at line 13)
#     Failed test (t\01test.t at line 14)
#     Failed test (t\01test.t at line 16)
# Looks like you failed 5 tests of 6.
Failed 1/1 test scripts, 0.00% okay. 5/6 subtests failed, 16.67% okay.
NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return code '0x2'
Stop.



MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Sys::Filesystem::MSWin32

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'Your Name Here',
    ... # other information
    PREREQ_PM   => {
        'Sys::Filesystem::MSWin32'      => '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks!


--

Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
  Platform:
    osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
    uname=''
    config_args='undef'
    hint=recommended, useposix=true, d_sigaction=undef
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cl', ccflags ='-nologo -Gf -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE 
-DNO_STRICT -DHAVE_DES_FCRYPT  -DNO_HASH_SEED -DPERL_IMPLICIT_CONTEXT 
-DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX',
    optimize='-MD -Zi -DNDEBUG -O1',
    cppflags='-DWIN32'
    ccversion='', gccversion='', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', 
lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf  
-libpath:"C:\Perl\lib\CORE"  -machine:x86'
    libpth=\lib
    libs=  oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib  
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib  netapi32.lib 
uuid.lib ws2_32.lib mpr.lib winmm.lib  version.lib odbc32.lib odbccp32.lib 
msvcrt.lib
    perllibs=  oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib  
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib  netapi32.lib 
uuid.lib ws2_32.lib mpr.lib winmm.lib  version.lib odbc32.lib odbccp32.lib 
msvcrt.lib
    libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib
    gnulibc_version='undef'
  Dynamic Linking:
    dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf  
-libpath:"C:\Perl\lib\CORE"  -machine:x86'

Reply via email to