This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

******************************** NOTE ********************************
The comments below are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional information, and do not take
it personally.  (We appreciate your patience. :)
**********************************************************************

Hello, Autrijus Tang! This is a computer-generated error report created
automatically by CPANPLUS, version 0.051.  
Comments from the tester may appear at the end of this report, as well.


Thanks for uploading your works to CPAN.  However, it appears that
CPANPLUS encountered problems while testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Jan 21 21:07:17 2005] Already ran '/usr/bin/make' for this module 
[Module::Signature] -- not running again unless you force
[ERROR] [Fri Jan 21 21:07:45 2005] MAKE TEST failed: 
不正なファイル記述子です PERL_DL_NONLAZY=1 /usr/bin/perl 
"-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 
'blib/arch')" t/0-signature.t t/1-basic.t
t/0-signature....gpg: failed to create temporary file 
`/root/.gnupg/.#lk0xf70059f0.yuhi.localdomain.8836': 
そのようなファイルやディレクトリはありません
gpg: keyblock resource `/root/.gnupg/pubring.gpg': 一般的なエラー
gpg: 2004年12月16日 16時13分16秒 JST のDSA鍵ID 3C3501A0による署名
gpg: 書込み可能な鍵輪が見つかりません: eof
gpg: `[stream]'の読込みエラー: 一般的なエラー
gpg: 署名を検査できません: 公開鍵が見つかりません
==> BAD/TAMPERED signature detected! <==
#     Failed test (t/0-signature.t at line 30)
#          got: -3
#     expected: 0
# Looks like you failed 1 tests of 1.
dubious
        Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
        Failed 1/1 tests, 0.00% okay
t/1-basic........ok
Failed 1/2 test scripts, 50.00% okay. 1/3 subtests failed, 66.67% okay.
Failed Test     Stat Wstat Total Fail  Failed  List of Failed
-------------------------------------------------------------------------------
t/0-signature.t    1   256     1    1 100.00%  1
make: *** [test_dynamic] エラー 255



--

Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
  Platform:
    osname=linux, osvers=2.4.21-14.elsmp, archname=i386-linux-thread-multi
    uname='linux tweety.build.redhat.com 2.4.21-14.elsmp #1 smp wed apr 14 
18:55:47 edt 2004 i686 i686 i386 gnulinux '
    config_args='-des -Doptimize=-O2 -g -pipe -m32 -march=i386 -mtune=pentium4 
-Dversion=5.8.5 -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red 
Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux 
-Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads 
-Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow 
-Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl -Ubincompat5005 
-Uversiononly -Dpager=/usr/bin/less -isr -Dinc_version_list=5.8.4 5.8.3 5.8.2 
5.8.1 5.8.0'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS 
-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE 
-D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    optimize='-O2 -g -pipe -m32 -march=i386 -mtune=pentium4',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING 
-fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm'
    ccversion='', gccversion='3.4.2 20041006 (Red Hat 3.4.2-5)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.3.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.3'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E 
-Wl,-rpath,/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'

Reply via email to