This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- This is an error report generated automatically by CPANPLUS, version 0.0499. Below is the error stack during 'make test': C:\perl\5.8.5\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t\1_new.t t\2_Log.t t\3_Exit.t t\4_Open.t t\5_GetSet.t t\6_Table.t t\7_File.t t\8_Dir.t t\1_new.......dubious Test returned status 7 (wstat 1792, 0x700) DIED. FAILED tests 6-12 Failed 7/12 tests, 41.67% okay t\2_Log.......dubious Test returned status 9 (wstat 2304, 0x900) DIED. FAILED tests 1, 4-5, 8-9, 13-15, 18 Failed 9/18 tests, 50.00% okay t\3_Exit......dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1-2 Failed 2/2 tests, 0.00% okay t\4_Open......ok t\5_GetSet....ok t\6_Table.....dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 2-11 Failed 10/11 tests, 9.09% okay t\7_File......dubious Test returned status 22 (wstat 5632, 0x1600) DIED. FAILED tests 2-23 Failed 22/23 tests, 4.35% okay t\8_Dir.......dubious Test returned status 10 (wstat 2560, 0xa00) DIED. FAILED tests 2-11 Failed 10/11 tests, 9.09% okay Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t\1_new.t 7 1792 12 7 58.33% 6-12 t\2_Log.t 9 2304 18 9 50.00% 1 4-5 8-9 13-15 18 t\3_Exit.t 2 512 2 2 100.00% 1-2 t\6_Table.t 10 2560 11 20 181.82% 2-11 t\7_File.t 22 5632 23 44 191.30% 2-23 t\8_Dir.t 10 2560 11 20 181.82% 2-11 Microsoft (R) Program Maintenance Utility Version 7.10.3077 Copyright (C) Microsoft Corporation. All rights reserved. Das System kann den angegebenen Pfad nicht finden. readline() on closed filehandle FH at t\1_new.t line 18. # Failed test (t\1_new.t at line 47) # undef # doesn't match '(?-xism:.*Invalid .*invalid.)' Das System kann den angegebenen Pfad nicht finden. readline() on closed filehandle FH at t\1_new.t line 18. # Failed test (t\1_new.t at line 51) # undef # doesn't match '(?-xism:.*Invalid .*invalid.)' Das System kann den angegebenen Pfad nicht finden. readline() on closed filehandle FH at t\1_new.t line 18. # Failed test (t\1_new.t at line 55) # undef # doesn't match '(?-xism:.*Invalid .*invalid.)' Das System kann den angegebenen Pfad nicht finden. readline() on closed filehandle FH at t\1_new.t line 18. # Failed test (t\1_new.t at line 60) # undef # doesn't match '(?-xism:.*Invalid .*invalid.)' Das System kann den angegebenen Pfad nicht finden. readline() on closed filehandle FH at t\1_new.t line 18. # Failed test (t\1_new.t at line 69) # undef # doesn't match '(?-xism:meier)' Das System kann den angegebenen Pfad nicht finden. readline() on closed filehandle FH at t\1_new.t line 18. # Failed test (t\1_new.t at line 78) # undef # doesn't match '(?-xism:Missing mandatory option 'file'.)' Das System kann den angegebenen Pfad nicht finden. readline() on closed filehandle FH at t\1_new.t line 18. # Failed test (t\1_new.t at line 85) # undef # doesn't match '(?-xism:meier)' # Looks like you failed 7 tests of 12. Der Befehl "rm" ist entweder falsch geschrieben oder konnte nicht gefunden werden. Das System kann den angegebenen Pfad nicht finden. # Failed test (t\2_Log.t at line 85) # got: '1' # expected: '0' # Failed test (t\2_Log.t at line 88) # undef # doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)' Der Befehl "rm" ist entweder falsch geschrieben oder konnte nicht gefunden werden. Das System kann den angegebenen Pfad nicht finden. # Failed test (t\2_Log.t at line 99) # got: '1' # expected: '0' # Failed test (t\2_Log.t at line 102) # undef # doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)' Der Befehl "rm" ist entweder falsch geschrieben oder konnte nicht gefunden werden. Das System kann den angegebenen Pfad nicht finden. # Failed test (t\2_Log.t at line 111) # got: '1' # expected: '0' # Failed test (t\2_Log.t at line 115) readline() on closed filehandle FH at t\2_Log.t line 116. # Failed test (t\2_Log.t at line 117) # undef # doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)' Der Befehl "rm" ist entweder falsch geschrieben oder konnte nicht gefunden werden. Das System kann den angegebenen Pfad nicht finden. # Failed test (t\2_Log.t at line 131) # got: '1' # expected: '0' # Failed test (t\2_Log.t at line 134) # undef # doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)' # Looks like you failed 9 tests of 18. Das System kann den angegebenen Pfad nicht finden. readline() on closed filehandle FH at t\3_Exit.t line 18. # Failed test (t\3_Exit.t at line 34) # got: '1' # expected: '2' # Failed test (t\3_Exit.t at line 35) # undef # doesn't match '(?-xism:\d{4}:\s+test)' # Looks like you failed 2 tests of 2. Syntaxfehler. t\6_Table.t: Fri Jan 21 21:18:25 2005: Can't Open(>> /tmp/t\6_Table.log), $! is "No such file or directory" at t\6_Table.t line 27 # Looks like you planned 11 tests but only ran 1. Syntaxfehler. t\7_File.t: Fri Jan 21 21:18:25 2005: Can't Open(>> /tmp/t\7_File.log), $! is "No such file or directory" at t\7_File.t line 15 # Looks like you planned 23 tests but only ran 1. Syntaxfehler. t\8_Dir.t: Fri Jan 21 21:18:25 2005: Can't Open(>> /tmp/t\8_Dir.log), $! is "No such file or directory" at t\8_Dir.t line 15 # Looks like you planned 11 tests but only ran 1. Failed 6/8 test scripts, 25.00% okay. 60/89 subtests failed, 32.58% okay. NMAKE : fatal error U1077: 'C:\perl\5.8.5\bin\perl.exe' : return code '0x2' Stop. Additional comments: Please use ExtUtils::Command instead of hardcoding the unix toolkit names. perl -MExtUtils::Command -e rm_f does `rm -f @ARGV` etc. Thanks, -max -- Summary of my perl5 (revision 5 version 8 subversion 5) configuration: Platform: osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread uname='' config_args='undef' hint=recommended, useposix=true, d_sigaction=undef usethreads=undef use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cl', ccflags ='-nologo -GF -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX', optimize='-MD -Zi -DNDEBUG -O1', cppflags='-DWIN32' ccversion='', gccversion='', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf -libpath:"c:\perl\5.8.5\lib\CORE" -machine:x86' libpth="C:\Programme\Microsoft Visual C++ Toolkit 2003\lib" libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib gnulibc_version='undef' Dynamic Linking: dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf -libpath:"c:\perl\5.8.5\lib\CORE" -machine:x86'
