This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- ******************************** NOTE ******************************** The comments below are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional information, and do not take it personally. (We appreciate your patience. :) ********************************************************************** Hello, Brian Ingerson! This is a computer-generated error report created automatically by CPANPLUS, version 0.051. Comments from the tester may appear at the end of this report, as well. Thanks for uploading your works to CPAN. However, it appears that CPANPLUS encountered problems while testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Jan 22 13:42:13 2005] Module 'Kwiki' requires 'Spoon' version '0.21' to be installed [MSG] [Sat Jan 22 13:42:17 2005] Module 'Spoon' requires 'IO::All' version '0.32' to be installed [MSG] [Sat Jan 22 13:42:17 2005] Module 'Spoon' requires 'Template' version '2.10' to be installed [ERROR] [Sat Jan 22 13:43:07 2005] MAKE TEST failed: 不正なファイル記述子です PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t t/absolute...........ok t/all................ok t/all2...............ok t/assert.............ok t/assert2............ok 2/4 skipped: requires MLDBM t/autotie............ok t/backwards..........skipped all skipped: requires File::ReadBackwards t/chdir..............ok t/chomp..............ok t/construct..........ok t/dbm................ok t/devnull............ok t/empty..............ok t/error1.............ok t/file_spec..........ok t/file_subclass......ok t/fileno.............ok t/inline_subclass....ok t/input..............ok t/link...............ok t/link2..............ok t/lock...............ok t/mldbm..............skipped all skipped: requires MLDBM t/overload...........ok t/pipe...............ok t/print..............ok t/println............ok t/read...............ok t/read_write.........ok t/round_robin........ok t/scalar.............ok t/seek...............ok t/separator..........ok t/spiffy.............ok t/stat...............ok t/subtleties.........ok t/synopsis1..........ok t/synopsis2..........# Failed test (t/synopsis2.t at line 14) # got: 't/mydir/file2 - file2 is woohoo # ' # expected: 't/mydir/file1 - file1 is fun # ' # Failed test (t/synopsis2.t at line 14) # got: 't/mydir/file3 - file3 is whee # ' # expected: 't/mydir/file2 - file2 is woohoo # ' # Failed test (t/synopsis2.t at line 14) # got: 't/mydir/file1 - file1 is fun # ' # expected: 't/mydir/file3 - file3 is whee # ' # Looks like you failed 3 tests of 10. dubious Test returned status 3 (wstat 768, 0x300) DIED. FAILED tests 2-4 Failed 3/10 tests, 70.00% okay t/synopsis3..........skipped all skipped: requires IO::String t/synopsis5..........ok t/tie................ok t/tie_file...........ok Failed 1/42 test scripts, 97.62% okay. 3/267 subtests failed, 98.88% okay. Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/synopsis2.t 3 768 10 3 30.00% 2-4 3 tests and 2 subtests skipped. make: *** [test_dynamic] エラー 255 -- Summary of my perl5 (revision 5 version 8 subversion 5) configuration: Platform: osname=linux, osvers=2.4.21-14.elsmp, archname=i386-linux-thread-multi uname='linux tweety.build.redhat.com 2.4.21-14.elsmp #1 smp wed apr 14 18:55:47 edt 2004 i686 i686 i386 gnulinux ' config_args='-des -Doptimize=-O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -Dversion=5.8.5 -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dinc_version_list=5.8.4 5.8.3 5.8.2 5.8.1 5.8.0' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -g -pipe -m32 -march=i386 -mtune=pentium4', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='3.4.2 20041006 (Red Hat 3.4.2-5)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.3.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.3' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
