This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- ******************************** NOTE ******************************** The comments below are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional information, and do not take it personally. (We appreciate your patience. :) ********************************************************************** Hello, brian d foy! This is a computer-generated error report created automatically by CPANPLUS, version 0.050_04. Comments from the tester may appear at the end of this report, as well. Thanks for uploading your works to CPAN. However, it appears that CPANPLUS encountered problems while testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Feb 19 17:27:33 2005] Trying to get 'http://cpan.pair.com/authors/id/B/BD/BDFOY/CHECKSUMS' [MSG] [Sat Feb 19 17:27:34 2005] Checksum matches for 'Test-File-1.08.tar.gz' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/Changes' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/lib/' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/lib/File.pm' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/Makefile.PL' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/MANIFEST' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/META.yml' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/README' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/t/' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/t/load.t' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/t/pod.t' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/t/prereq.t' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/t/setup.t' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/t/test_files.t' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test-File-1.08/t/test_manifest' [MSG] [Sat Feb 19 17:27:34 2005] Extracted 'Test::File' to 'C:\SOURCE\perl\.cpanplus\5.8.4\build\Test-File-1.08' [ERROR] [Sat Feb 19 17:27:47 2005] MAKE TEST failed: Bad file descriptor C:\Perl\bin\perl.exe "-MTest::Manifest" "-e" "run_t_manifest(0, 'blib\lib', 'blib\arch')" t\load..........ok t\pod...........ok t\prereq........ok t\setup.........ok t\test_files....FAILED tests 12, 14, 16, 18 Failed 4/27 tests, 85.19% okay (less 2 skipped tests: 21 okay, 77.78%) Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t\test_files.t 27 4 14.81% 12 14 16 18 2 subtests skipped. Microsoft (R) Program Maintenance Utility Version 1.50 Copyright (c) Microsoft Corp 1988-94. All rights reserved. Test::Manifest::test_harness found [t\load.t t\pod.t t\prereq.t t\setup.t t\test_files.t] # Failed test (t\test_files.t at line 78) # STDOUT is: # not ok 1 - executable is executable # # not: # ok 1 - executable is executable # # as expected Use of uninitialized value in concatenation (.) or string at C:/Perl/site/lib/Test/Builder/Tester.pm line 557. # STDERR is: # # File [executable] is not executable # # Failed test (t\test_files.t at line 77) # # not: # # as expected # Failed test (t\test_files.t at line 96) # STDOUT is: # not ok 1 - executable mode is 0100 # # not: # ok 1 - executable mode is 0100 # # as expected Use of uninitialized value in concatenation (.) or string at C:/Perl/site/lib/Test/Builder/Tester.pm line 557. # STDERR is: # # File [executable] mode is not 0100 # # Failed test (t\test_files.t at line 95) # # not: # # as expected # Failed test (t\test_files.t at line 114) # STDOUT is: # not ok 1 - readable mode is 0400 # # not: # ok 1 - readable mode is 0400 # # as expected Use of uninitialized value in concatenation (.) or string at C:/Perl/site/lib/Test/Builder/Tester.pm line 557. # STDERR is: # # File [readable] mode is not 0400 # # Failed test (t\test_files.t at line 113) # # not: # # as expected # Failed test (t\test_files.t at line 132) # STDOUT is: # not ok 1 - writeable mode is 0200 # # not: # ok 1 - writeable mode is 0200 # # as expected Use of uninitialized value in concatenation (.) or string at C:/Perl/site/lib/Test/Builder/Tester.pm line 557. # STDERR is: # # File [writeable] mode is not 0200 # # Failed test (t\test_files.t at line 131) # # not: # # as expected Failed 1/5 test scripts, 80.00% okay. 4/35 subtests failed, 88.57% okay. NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return code '0xff' Stop. -- Summary of my perl5 (revision 5 version 8 subversion 4) configuration: Platform: osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread uname='' config_args='undef' hint=recommended, useposix=true, d_sigaction=undef usethreads=undef use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cl', ccflags ='-nologo -Gf -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DNO_HASH_SEED -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX', optimize='-MD -Zi -DNDEBUG -O1', cppflags='-DWIN32' ccversion='', gccversion='', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86' libpth=C:\PROGRA~1\MICROS~3\VC98\lib libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib gnulibc_version='undef' Dynamic Linking: dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86'
