This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Randal L. Schwartz, This is a computer-generated error report created automatically by CPANPLUS, version 0.053. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Mar 29 17:13:58 2005] Checking if source files are up to date [MSG] [Tue Mar 29 17:13:58 2005] Retrieving C:\Documents and Settings\Rob.MAGNETO-XP\Application Data\.cpanplus\sourcefiles.2.13.stored [MSG] [Tue Mar 29 17:14:03 2005] Trying to get 'ftp://cpan.etla.org/pub/CPAN/authors/id/M/ME/MERLYN/Inline-Spew-0.02.tar.gz' [MSG] [Tue Mar 29 17:14:06 2005] Trying to get 'ftp://cpan.etla.org/pub/CPAN/authors/id/M/ME/MERLYN/CHECKSUMS' [MSG] [Tue Mar 29 17:14:06 2005] Checksum matches for 'Inline-Spew-0.02.tar.gz' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/Changes' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/lib/' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/lib/Inline/' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/lib/Inline/Spew.pm' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/Makefile.PL' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/MANIFEST' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/META.yml' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/README' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/t/' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/t/01-basic.t' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/t/02-mission.t' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/t/99-test-pod-coverage.t' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline-Spew-0.02/t/99-test-pod.t' [MSG] [Tue Mar 29 17:14:07 2005] Extracted 'Inline::Spew' to 'C:\Documents and Settings\Rob.MAGNETO-XP\Application Data\.cpanplus\5.8.6\build\Inline-Spew-0.02' [ERROR] [Tue Mar 29 17:14:22 2005] MAKE TEST failed: No such file or directory C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t\01-basic.t t\02-mission.t t\99-test-pod-coverage.t t\99-test-pod.t t\01-basic................dubious Test returned status 255 (wstat 65280, 0xff00) after all the subtests completed successfully t\02-mission..............dubious Test returned status 255 (wstat 65280, 0xff00) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t\99-test-pod-coverage....skipped all skipped: Distribution tests selected only in verbose mode t\99-test-pod.............skipped all skipped: Distribution tests selected only in verbose mode Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t\01-basic.t 255 65280 1 0 0.00% ?? t\02-mission.t 255 65280 1 1 100.00% 1 2 tests skipped. Microsoft (R) Program Maintenance Utility Version 1.50 Copyright (c) Microsoft Corp 1988-94. All rights reserved. Can't open perl script "and": No such file or directory Failed to autogenerate C:\Documents and Settings\Rob.MAGNETO-XP\Application Data\.cpanplus\5.8.6\build\Inline-Spew-0.02\_Inline\config. at t\01-basic.t line 0 INIT failed--call queue aborted, <DATA> line 1. # Looks like your test died just after 1. Can't open perl script "and": No such file or directory # Failed test (t\02-mission.t at line 4) # Tried to use 'Inline'. # Error: Failed to autogenerate C:\Documents and Settings\Rob.MAGNETO-XP\Application Data\.cpanplus\5.8.6\build\Inline-Spew-0.02\_Inline\config. # # at (eval 3) line 2 # BEGIN failed--compilation aborted at t\02-mission.t line 4. Undefined subroutine &main::mission called at t\02-mission.t line 88. # Looks like you failed 1 test of 1. # Looks like your test died just after 1. Failed 2/4 test scripts, 50.00% okay. 1/2 subtests failed, 50.00% okay. NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return code '0xff' Stop. PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Inline 0.44 Parse::RecDescent 1.94 YAML 0.35 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 6) configuration: Platform: osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread uname='' config_args='undef' hint=recommended, useposix=true, d_sigaction=undef usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='cl', ccflags ='-nologo -Gf -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DNO_HASH_SEED -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX', optimize='-MD -Zi -DNDEBUG -O1', cppflags='-DWIN32' ccversion='', gccversion='', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86' libpth=\lib libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib gnulibc_version='undef' Dynamic Linking: dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86'
