This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Geo Tiger, This is a computer-generated error report created automatically by CPANPLUS, version 0.053. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Fri Apr 29 20:34:25 2005] Trying to get 'file://usr/local/cpan/authors/id/G/GE/GEOTIGER/CGI-Getopt-0.11.tar.gz' [MSG] [Fri Apr 29 20:34:25 2005] Trying to get 'file://usr/local/cpan/authors/id/G/GE/GEOTIGER/CHECKSUMS' [MSG] [Fri Apr 29 20:34:25 2005] Checksum matches for 'CGI-Getopt-0.11.tar.gz' [MSG] [Fri Apr 29 20:34:25 2005] Extracted './CGI-Getopt-0.11/' [MSG] [Fri Apr 29 20:34:25 2005] Extracted './CGI-Getopt-0.11/t/' [MSG] [Fri Apr 29 20:34:25 2005] Extracted './CGI-Getopt-0.11/t/Getopt.t' [MSG] [Fri Apr 29 20:34:25 2005] Extracted './CGI-Getopt-0.11/Getopt.pm' [MSG] [Fri Apr 29 20:34:25 2005] Extracted './CGI-Getopt-0.11/test.pl' [MSG] [Fri Apr 29 20:34:25 2005] Extracted './CGI-Getopt-0.11/Makefile.PL' [MSG] [Fri Apr 29 20:34:25 2005] Extracted './CGI-Getopt-0.11/CGI-Getopt-0.11.readme' [MSG] [Fri Apr 29 20:34:25 2005] Extracted './CGI-Getopt-0.11/README' [MSG] [Fri Apr 29 20:34:25 2005] Extracted './CGI-Getopt-0.11/MANIFEST' [MSG] [Fri Apr 29 20:34:25 2005] Extracted 'CGI::Getopt' to '/home/cpanplus/.cpanplus/5.8.5/build/CGI-Getopt-0.11' [ERROR] [Fri Apr 29 20:34:27 2005] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/bin/perl5.8.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/Getopt.t t/Getopt....[Fri Apr 29 20:34:27 2005] Getopt.t: Can't locate Debug/EchoMessage.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/CGI-Getopt-0.11/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/CGI-Getopt-0.11/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/CGI-Getopt-0.11/blib/lib/CGI/Getopt.pm line 9. [Fri Apr 29 20:34:27 2005] Getopt.t: BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/CGI-Getopt-0.11/blib/lib/CGI/Getopt.pm line 9. [Fri Apr 29 20:34:27 2005] Getopt.t: Compilation failed in require at t/Getopt.t line 9. [Fri Apr 29 20:34:27 2005] Getopt.t: BEGIN failed--compilation aborted at t/Getopt.t line 9. # No tests run! dubious Test returned status 255 (wstat 65280, 0xff00) FAILED--1 test script could be run, alas--no output ever seen make: *** [test_dynamic] Erreur 255 MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Debug::EchoMessage As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'Geo Tiger ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Debug::EchoMessage' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Test::Harness 2.48 Test::More 0.54 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** -- Summary of my perl5 (revision 5 version 8 subversion 5) configuration: Platform: osname=linux, osvers=2.4.19-44mdkenterprise, archname=i386-linux-thread-multi uname='linux updates.mandrakesoft.com 2.4.19-44mdkenterprise #1 smp thu aug 12 21:22:45 mdt 2004 i686 intel(r) pentium(r) 4 cpu 3.00ghz unknown gnulinux ' config_args='-des -Dinc_version_list=5.8.4/i386-linux-thread-multi 5.8.4 5.8.3/i386-linux-thread-multi 5.8.3 5.8.2/i386-linux-thread-multi 5.8.2 5.8.1/i386-linux-thread-multi 5.8.1 5.8.0/i386-linux-thread-multi 5.8.0 5.6.1 5.6.0 -Darchname=i386-linux -Dcc=gcc -Doptimize=-O2 -fomit-frame-pointer -pipe -march=i586 -mtune=pentiumpro -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr -Dman3ext=3pm -Dcf_by=Mandrakesoft -Dmyhostname=localhost [EMAIL PROTECTED] -Dd_dosuid -Ud_csh -Duseshrplib -Accflags=-DPERL_DISABLE_PMC -Dusethreads' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_DISABLE_PMC -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -fomit-frame-pointer -pipe -march=i586 -mtune=pentiumpro ', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_DISABLE_PMC -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lndbm -lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.3.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.3' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
