This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear SREZIC,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.053. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Wed May  4 21:03:31 2005] Trying to get 
'http://www.cpan.org/authors/id/S/SR/SREZIC/Tk-Getopt-0.49.tar.gz'
[MSG] [Wed May  4 21:03:33 2005] Trying to get 
'http://www.cpan.org/authors/id/S/SR/SREZIC/CHECKSUMS'
[MSG] [Wed May  4 21:03:34 2005] Checksum matches for 'Tk-Getopt-0.49.tar.gz'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/t/'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/t/gui.t'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/t/getopt2.t'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/t/getopt.t'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/t/simple.t'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/t/linkage2.t'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/t/gui2.t'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/t/modern.t'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/t/simple2.t'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/t/opttest'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/Getopt.pm'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/Changes'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/MANIFEST'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/Makefile.PL'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk-Getopt-0.49/README'
[MSG] [Wed May  4 21:03:35 2005] Extracted 'Tk::Getopt' to 
'/home/imacat/.cpanplus/5.8.6/build/Tk-Getopt-0.49'
[ERROR] [Wed May  4 21:03:40 2005] MAKE TEST failed: [EMAIL PROTECTED] 
t/getopt......ok
t/getopt2.....ok
t/gui.........Can't locate Tk.pm in @INC (@INC contains: 
/home/imacat/.cpanplus/5.8.6/build/Tk-Getopt-0.49/blib/lib 
/home/imacat/.cpanplus/5.8.6/build/Tk-Getopt-0.49/blib/arch 
/home/imacat/lib/perl5 
/home/imacat/.cpanplus/5.8.6/build/Net-SFTP-Foreign-0.52/blib/lib 
/usr/lib/perl5/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/5.8.6/i686-linux-thread-multi-ld /usr/lib/perl5/5.8.6 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl /usr/share/perl5 . 
/usr/lib/perl5/5.8.6/i686-linux-thread-multi-ld /usr/lib/perl5/5.8.6 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl /usr/share/perl5 .) at 
t/gui.t line 14.
BEGIN failed--compilation aborted at t/gui.t line 14.
dubious
        Test returned status 2 (wstat 512, 0x200)
DIED. FAILED test 1
        Failed 1/1 tests, 0.00% okay
t/gui2........Can't locate Tk.pm in @INC (@INC contains: 
/home/imacat/.cpanplus/5.8.6/build/Tk-Getopt-0.49/blib/lib 
/home/imacat/.cpanplus/5.8.6/build/Tk-Getopt-0.49/blib/arch 
/home/imacat/lib/perl5 
/home/imacat/.cpanplus/5.8.6/build/Net-SFTP-Foreign-0.52/blib/lib 
/usr/lib/perl5/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/5.8.6/i686-linux-thread-multi-ld /usr/lib/perl5/5.8.6 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl /usr/share/perl5 . 
/usr/lib/perl5/5.8.6/i686-linux-thread-multi-ld /usr/lib/perl5/5.8.6 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl /usr/share/perl5 .) at 
t/gui2.t line 60.
BEGIN failed--compilation aborted at t/gui2.t line 60.
dubious
        Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 1-2
        Failed 2/2 tests, 0.00% okay
t/linkage2....ok
t/modern......Can't locate Tk.pm in @INC (@INC contains: 
/home/imacat/.cpanplus/5.8.6/build/Tk-Getopt-0.49/blib/lib 
/home/imacat/.cpanplus/5.8.6/build/Tk-Getopt-0.49/blib/arch 
/home/imacat/lib/perl5 
/home/imacat/.cpanplus/5.8.6/build/Net-SFTP-Foreign-0.52/blib/lib 
/usr/lib/perl5/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/5.8.6/i686-linux-thread-multi-ld /usr/lib/perl5/5.8.6 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl /usr/share/perl5 . 
/usr/lib/perl5/5.8.6/i686-linux-thread-multi-ld /usr/lib/perl5/5.8.6 
/usr/lib/perl5/site_perl/5.8.6/i686-linux-thread-multi-ld 
/usr/lib/perl5/site_perl/5.8.6 /usr/lib/perl5/site_perl /usr/share/perl5 .) at 
t/modern.t line 24.
BEGIN failed--compilation aborted at t/modern.t line 24.
# Looks like your test died before it could output anything.
dubious
        Test returned status 255 (wstat 65280, 0xff00)
t/simple......ok
t/simple2.....ok
Failed Test Stat Wstat Total Fail  Failed  List of Failed
-------------------------------------------------------------------------------
t/gui.t        2   512     1    1 100.00%  1
t/gui2.t       2   512     2    3 150.00%  1-2
t/modern.t   255 65280    ??   ??       %  ??
Failed 3/8 test scripts, 62.50% okay. 3/38 subtests failed, 92.11% okay.
make: *** [test_dynamic] Error 255



MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Tk
Tk
Tk

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'SREZIC ([EMAIL PROTECTED])',
    ... # other information
    PREREQ_PM   => {
        'Tk'    => '0', # or a minimum working version
        'Tk'    => '0', # or a minimum working version
        'Tk'    => '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
  Platform:
    osname=linux, osvers=2.4.30, archname=i686-linux-thread-multi-ld
    uname='linux rinse 2.4.30 #2 sun apr 10 20:08:29 cst 2005 i686 unknown '
    config_args='-s -d -Dusethreads -Dcc=gcc -Doptimize=-g -O3 -Duselongdouble 
-Dprefix=/usr -Dd_dosuid -Dotherlibdirs=/usr/share/perl5 
-Dinc_version_list=none -Duseshrplib=false [EMAIL PROTECTED] 
-Dsiteman1=/usr/share/man/man1 -Dsiteman1=/usr/share/man/man3'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS 
-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE 
-D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING 
-fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='3.4.3', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='long double', nvsize=12, Off_t='off_t', 
lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.4.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.4'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

Reply via email to