This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear RPAUL,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.053. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Jun 3 19:27:23 2005] Trying to get
'file://aliens/cpan/minicpan/authors/id/R/RP/RPAUL/LWP-Protocol-virtual-0.02.tar.gz'
[MSG] [Fri Jun 3 19:27:23 2005] Trying to get
'file://aliens/cpan/minicpan/authors/id/R/RP/RPAUL/CHECKSUMS'
[MSG] [Fri Jun 3 19:27:23 2005] Checksum matches for
'LWP-Protocol-virtual-0.02.tar.gz'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/t/'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted
'LWP-Protocol-virtual-0.02/t/.cvsignore'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted
'LWP-Protocol-virtual-0.02/t/01-loaduri.t'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted
'LWP-Protocol-virtual-0.02/t/02-resolve.t'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted
'LWP-Protocol-virtual-0.02/t/00-load.t'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted
'LWP-Protocol-virtual-0.02/GNUmakefile'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/.vimrc'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/Changes'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/MANIFEST'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/META.yml'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/test.pl'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/lib/'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/lib/URI/'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted
'LWP-Protocol-virtual-0.02/lib/URI/virtual.pm'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/lib/LWP/'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted
'LWP-Protocol-virtual-0.02/lib/LWP/Protocol/'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted
'LWP-Protocol-virtual-0.02/lib/LWP/Protocol/virtual.pm'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted
'LWP-Protocol-virtual-0.02/.cvsignore'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/.perldb'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted
'LWP-Protocol-virtual-0.02/testenv.sh'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted
'LWP-Protocol-virtual-0.02/Makefile.PL'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP-Protocol-virtual-0.02/README'
[MSG] [Fri Jun 3 19:27:23 2005] Extracted 'LWP::Protocol::virtual' to
'C:\Dokumente und
Einstellungen\Administrator\Anwendungsdaten\.cpanplus\5.8.5\build\LWP-Protocol-virtual-0.02'
[ERROR] [Fri Jun 3 19:27:30 2005] MAKE TEST failed: No such file or directory
C:\perl\5.8.5\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib\lib', 'blib\arch')" t\00-load.t t\01-loaduri.t t\02-resolve.t
t\00-load.......ok
t\01-loaduri....dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 4
Failed 1/4 tests, 75.00% okay
t\02-resolve....dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t\01-loaduri.t 1 256 4 1 25.00% 4
t\02-resolve.t 1 256 1 1 100.00% 1
Microsoft (R) Program Maintenance Utility Version 7.10.3077
Copyright (C) Microsoft Corporation. All rights reserved.
# Testing LWP::Protocol::virtual 0.02
# Failed test (t\01-loaduri.t at line 23)
# res=file://C:/Dokumente/01-loaduri.cfg
# testdir=file://C:/Dokumente und
Einstellungen/Administrator/Anwendungsdaten/.cpanplus/5.8.5/build/LWP-Protocol-virtual-0.02/t
# Looks like you failed 1 test of 4.
# Failed test (t\02-resolve.t at line 24)
# Looks like you failed 1 test of 1.
Failed 2/3 test scripts, 33.33% okay. 2/8 subtests failed, 75.00% okay.
NMAKE : fatal error U1077: 'C:\perl\5.8.5\bin\perl.exe' : return code '0x1'
Stop.
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
LWP 5.800
Test::More 0.54
URI 1.31
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0206.
--
Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
Platform:
osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
uname=''
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
usethreads=undef use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cl', ccflags ='-nologo -GF -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE
-DNO_STRICT -DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS
-DUSE_PERLIO -DPERL_MSVCRT_READFIX',
optimize='-MD -Zi -DNDEBUG -O1',
cppflags='-DWIN32'
ccversion='', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64',
lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf
-libpath:"c:\perl\5.8.5\lib\CORE" -machine:x86'
libpth="C:\Programme\Microsoft Visual C++ Toolkit 2003\lib"
libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib
uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib
msvcrt.lib
perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib
uuid.lib wsock32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib
msvcrt.lib
libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib
gnulibc_version='undef'
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf
-libpath:"c:\perl\5.8.5\lib\CORE" -machine:x86'
