This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Damian Conway, This is a computer-generated error report created automatically by CPANPLUS, version 0.055. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Sat Jul 23 13:02:13 2005] Trying to get 'file://usr/local/cpan/authors/id/D/DC/DCONWAY/CHECKSUMS' [MSG] [Sat Jul 23 13:02:14 2005] Checksum matches for 'Getopt-Euclid-0.0.2.tar.gz' [MSG] [Sat Jul 23 13:02:14 2005] Extracted 'Getopt-Euclid-0.0.2/' [MSG] [Sat Jul 23 13:02:14 2005] Extracted 'Getopt-Euclid-0.0.2/Build.PL' [MSG] [Sat Jul 23 13:02:14 2005] Extracted 'Getopt-Euclid-0.0.2/Changes' [MSG] [Sat Jul 23 13:02:14 2005] Extracted 'Getopt-Euclid-0.0.2/lib/' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/lib/Getopt/' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/lib/Getopt/Euclid/' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/lib/Getopt/Euclid/HierDemo.pm' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/lib/Getopt/Euclid.pm' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/Makefile.PL' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/MANIFEST' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/META.yml' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/README' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/00.load.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/bundle.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_bad_constraint.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_bad_default.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_missing_required.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_missing_var.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_no_spec.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_type.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_unknown_arg.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_unknown_spec.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_unknown_spec2.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_unknown_type.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_user_constraint.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_user_constraint_comma.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/fail_user_constraint_type.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/hier.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/pod-coverage.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/pod.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/quoted_args.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/repeated.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/simple.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt-Euclid-0.0.2/t/simple_shuffle.t' [MSG] [Sat Jul 23 13:02:15 2005] Extracted 'Getopt::Euclid' to '/home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2' [MSG] [Sat Jul 23 13:02:15 2005] Checking if your kit is complete... Looks good Writing Makefile for Getopt::Euclid [MSG] [Sat Jul 23 13:02:17 2005] Skip blib/lib/Getopt/Euclid/HierDemo.pm (unchanged) Skip blib/lib/Getopt/Euclid.pm (unchanged) Manifying blib/man3/Getopt::Euclid::HierDemo.3pm Manifying blib/man3/Getopt::Euclid.3pm [ERROR] [Sat Jul 23 13:02:20 2005] MAKE TEST failed: Bad file descriptor PERL_DL_NONLAZY=1 /usr/bin/perl5.8.5 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00.load....................... # Failed test (t/00.load.t at line 4) # Tried to use 'Getopt::Euclid'. # Error: Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at t/00.load.t line 4. # Compilation failed in require at (eval 3) line 2. # BEGIN failed--compilation aborted at (eval 3) line 2. Use of uninitialized value in concatenation (.) or string at t/00.load.t line 7. # Testing Getopt::Euclid # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/bundle........................Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. Compilation failed in require at t/bundle.t line 17. BEGIN failed--compilation aborted at t/bundle.t line 17. dubious Test returned status 2 (wstat 512, 0x200) t/fail_bad_constraint........... # Failed test (t/fail_bad_constraint.t at line 25) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_bad_constraint.t line 21. # ' # doesn't match '(?-xism:must be readable)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/fail_bad_default.............. # Failed test (t/fail_bad_default.t at line 25) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_bad_default.t line 21. # ' # doesn't match '(?-xism:Getopt::Euclid: Invalid .default value: file.default: '-)' # Failed test (t/fail_bad_default.t at line 27) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_bad_default.t line 21. # ' # doesn't match '(?-xism:Can't find string terminator "'")' # Looks like you failed 2 tests of 2. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1-2 Failed 2/2 tests, 0.00% okay t/fail_missing_required......... # Failed test (t/fail_missing_required.t at line 23) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_missing_required.t line 19. # ' # doesn't match '(?-xism:Missing required argument:)' # Failed test (t/fail_missing_required.t at line 24) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_missing_required.t line 19. # ' # doesn't match '(?-xism:-o)' # Looks like you failed 2 tests of 2. dubious Test returned status 2 (wstat 512, 0x200) DIED. FAILED tests 1-2 Failed 2/2 tests, 0.00% okay t/fail_missing_var.............. # Failed test (t/fail_missing_var.t at line 22) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_missing_var.t line 18. # ' # doesn't match '(?-xism:Unknown argument: size)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/fail_no_spec.................. # Failed test (t/fail_no_spec.t at line 25) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_no_spec.t line 21. # ' # doesn't match '(?-xism:Unknown argument)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/fail_type..................... # Failed test (t/fail_type.t at line 25) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_type.t line 21. # ' # doesn't match '(?-xism:<l> must be int but)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/fail_unknown_arg.............. # Failed test (t/fail_unknown_arg.t at line 25) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_unknown_arg.t line 21. # ' # doesn't match '(?-xism:Unknown argument: -b)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/fail_unknown_spec............. # Failed test (t/fail_unknown_spec.t at line 25) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_unknown_spec.t line 21. # ' # doesn't match '(?-xism:Getopt::Euclid: Unknown specification: max.headroom)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/fail_unknown_spec2............ # Failed test (t/fail_unknown_spec2.t at line 25) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_unknown_spec2.t line 21. # ' # doesn't match '(?-xism:Getopt::Euclid: Unknown specification: maxheadroom)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/fail_unknown_type............. # Failed test (t/fail_unknown_type.t at line 25) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_unknown_type.t line 21. # ' # doesn't match '(?-xism:Unknown .type constraint: file.type: \s* bleadable)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/fail_user_constraint.......... # Failed test (t/fail_user_constraint.t at line 25) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_user_constraint.t line 21. # ' # doesn't match '(?-xism:<l> must be > 0 but)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/fail_user_constraint_comma.... # Failed test (t/fail_user_constraint_comma.t at line 25) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_user_constraint_comma.t line 21. # ' # doesn't match '(?-xism:<l> must be > 0 but)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/fail_user_constraint_type..... # Failed test (t/fail_user_constraint_type.t at line 25) # 'Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. # Compilation failed in require at t/fail_user_constraint_type.t line 21. # ' # doesn't match '(?-xism:<l> must be \+int but)' # Looks like you failed 1 test of 1. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 1 Failed 1/1 tests, 0.00% okay t/hier..........................Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. Compilation failed in require at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid/HierDemo.pm line 3. BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid/HierDemo.pm line 3. Compilation failed in require at t/hier.t line 19. BEGIN failed--compilation aborted at t/hier.t line 19. dubious Test returned status 2 (wstat 512, 0x200) t/pod-coverage..................ok t/pod...........................ok t/quoted_args...................Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. Compilation failed in require at t/quoted_args.t line 9. BEGIN failed--compilation aborted at t/quoted_args.t line 9. dubious Test returned status 2 (wstat 512, 0x200) t/repeated......................Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. Compilation failed in require at t/repeated.t line 10. BEGIN failed--compilation aborted at t/repeated.t line 10. dubious Test returned status 2 (wstat 512, 0x200) t/simple........................Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. Compilation failed in require at t/simple.t line 19. BEGIN failed--compilation aborted at t/simple.t line 19. dubious Test returned status 2 (wstat 512, 0x200) t/simple_shuffle................Can't locate Smart/Comments.pm in @INC (@INC contains: /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/arch /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl .) at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. BEGIN failed--compilation aborted at /home/cpanplus/.cpanplus/5.8.5/build/Getopt-Euclid-0.0.2/blib/lib/Getopt/Euclid.pm line 390. Compilation failed in require at t/simple_shuffle.t line 19. BEGIN failed--compilation aborted at t/simple_shuffle.t line 19. dubious Test returned status 2 (wstat 512, 0x200) Failed Test Stat Wstat Total Fail Failed List of Failed --------------------------------------------------------------------------------------------------------------- t/00.load.t 1 256 1 1 100.00% 1 t/bundle.t 2 512 ?? ?? % ?? t/fail_bad_constraint.t 1 256 1 1 100.00% 1 t/fail_bad_default.t 2 512 2 2 100.00% 1-2 t/fail_missing_required.t 2 512 2 2 100.00% 1-2 t/fail_missing_var.t 1 256 1 1 100.00% 1 t/fail_no_spec.t 1 256 1 1 100.00% 1 t/fail_type.t 1 256 1 1 100.00% 1 t/fail_unknown_arg.t 1 256 1 1 100.00% 1 t/fail_unknown_spec.t 1 256 1 1 100.00% 1 t/fail_unknown_spec2.t 1 256 1 1 100.00% 1 t/fail_unknown_type.t 1 256 1 1 100.00% 1 t/fail_user_constraint.t 1 256 1 1 100.00% 1 t/fail_user_constraint_comma.t 1 256 1 1 100.00% 1 t/fail_user_constraint_type.t 1 256 1 1 100.00% 1 t/hier.t 2 512 ?? ?? % ?? t/quoted_args.t 2 512 ?? ?? % ?? t/repeated.t 2 512 ?? ?? % ?? t/simple.t 2 512 ?? ?? % ?? t/simple_shuffle.t 2 512 ?? ?? % ?? Failed 20/22 test scripts, 9.09% okay. 16/19 subtests failed, 15.79% okay. make: *** [test_dynamic] Erreur 2 MISSING PREREQUISITES: It was observed that the test suite seem to fail without these modules: Smart::Comments As such, adding the prerequisite module(s) to 'PREREQ_PM' in your Makefile.PL should solve this problem. For example: WriteMakefile( AUTHOR => 'Damian Conway ([EMAIL PROTECTED])', ... # other information PREREQ_PM => { 'Smart::Comments' => '0', # or a minimum working version } ); If you are interested in making a more flexible Makefile.PL that can probe for missing dependencies and install them, ExtUtils::AutoInstall at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be worth a look. Thanks! :-) PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: File::Spec::Functions 1.3 List::Util 1.17 Test::More 0.60 version 0.43 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** -- Summary of my perl5 (revision 5 version 8 subversion 5) configuration: Platform: osname=linux, osvers=2.4.19-44mdkenterprise, archname=i386-linux-thread-multi uname='linux updates.mandrakesoft.com 2.4.19-44mdkenterprise #1 smp thu aug 12 21:22:45 mdt 2004 i686 intel(r) pentium(r) 4 cpu 3.00ghz unknown gnulinux ' config_args='-des -Dinc_version_list=5.8.4/i386-linux-thread-multi 5.8.4 5.8.3/i386-linux-thread-multi 5.8.3 5.8.2/i386-linux-thread-multi 5.8.2 5.8.1/i386-linux-thread-multi 5.8.1 5.8.0/i386-linux-thread-multi 5.8.0 5.6.1 5.6.0 -Darchname=i386-linux -Dcc=gcc -Doptimize=-O2 -fomit-frame-pointer -pipe -march=i586 -mtune=pentiumpro -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr -Dman3ext=3pm -Dcf_by=Mandrakesoft -Dmyhostname=localhost [EMAIL PROTECTED] -Dd_dosuid -Ud_csh -Duseshrplib -Accflags=-DPERL_DISABLE_PMC -Dusethreads' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_DISABLE_PMC -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -fomit-frame-pointer -pipe -march=i586 -mtune=pentiumpro ', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DPERL_DISABLE_PMC -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='3.4.1 (Mandrakelinux 10.1 3.4.1-4mdk)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lndbm -lgdbm -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.3.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.3' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
