This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear GWOLF, This is a computer-generated error report created automatically by CPANPLUS, version 0.055. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'make test': [MSG] [Tue Aug 23 01:44:06 2005] Trying to get 'http://www.cpan.org/authors/id/G/GW/GWOLF/User-Simple-1.0.tar.gz' [MSG] [Tue Aug 23 01:44:12 2005] Trying to get 'http://www.cpan.org/authors/id/G/GW/GWOLF/CHECKSUMS' [MSG] [Tue Aug 23 01:44:15 2005] Checksum matches for 'User-Simple-1.0.tar.gz' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/lib/' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/lib/User/' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/lib/User/Simple/' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/lib/User/Simple/Admin.pm' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/lib/User/Simple.pm' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/META.yml' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/Changes' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/MANIFEST' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/t/' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/t/User-Simple.t' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/Makefile.PL' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User-Simple-1.0/README' [MSG] [Tue Aug 23 01:44:16 2005] Extracted 'User::Simple' to '/opt/perl/testers/.cpanplus/5.8.7/build/User-Simple-1.0' [MSG] [Tue Aug 23 01:44:17 2005] Warning: prerequisite Date::Calc 0 not found. Checking if your kit is complete... Looks good Writing Makefile for User::Simple [MSG] [Tue Aug 23 01:44:17 2005] Module 'User::Simple' requires 'Date::Calc' version '0' to be installed [MSG] [Tue Aug 23 01:44:18 2005] cp lib/User/Simple/Admin.pm blib/lib/User/Simple/Admin.pm cp lib/User/Simple.pm blib/lib/User/Simple.pm Manifying blib/man3/User::Simple::Admin.3 Manifying blib/man3/User::Simple.3 [ERROR] [Tue Aug 23 01:44:19 2005] MAKE TEST failed: [EMAIL PROTECTED] t/User-Simple....# Looks like you planned 31 tests but only ran 16. dubious Test returned status 15 (wstat 3840, 0xf00) DIED. FAILED tests 17-31 Failed 15/31 tests, 51.61% okay (less 14 skipped tests: 2 okay, 6.45%) Failed Test Stat Wstat Total Fail Failed List of Failed ------------------------------------------------------------------------------- t/User-Simple.t 15 3840 31 30 96.77% 17-31 14 subtests skipped. Failed 1/1 test scripts, 0.00% okay. 15/31 subtests failed, 51.61% okay. make: *** [test_dynamic] Error 15 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: DBI 1.48 Date::Calc 0 Digest::MD5 2.33 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 7) configuration: Platform: osname=linux, osvers=2.4.30, archname=i686-linux-thread-multi-64int-ld uname='linux rinse 2.4.30 #2 tue may 24 01:59:23 cst 2005 i686 unknown ' config_args='-s -d -Dusethreads -Dcc=gcc -Doptimize=-g -O3 -Duse64bitint -Duselongdouble -Dprefix=/usr -Dd_dosuid -Dotherlibdirs=/usr/share/perl5 -Dinc_version_list=none -Duseshrplib=false [EMAIL PROTECTED] -Dsiteman1=/usr/share/man/man1 -Dsiteman1=/usr/share/man/man3' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=undef uselongdouble=define usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-g -O3', cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.4.4', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.5.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='2.3.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E' cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
