This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear JTAVERNI, This is a computer-generated error report created automatically by CPANPLUS, version 0.0562. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'fetch': [CP_MSG] [Wed Aug 24 19:33:30 2005] Trying to get 'file://ftp/pub/CPAN/authors/id/J/JT/JTAVERNI/HTML-Content-Extractor-0.01.tar.gz' [CP_MSG] [Wed Aug 24 19:33:30 2005] Trying to get 'file://ftp/pub/CPAN/authors/id/J/JT/JTAVERNI/CHECKSUMS' [CP_MSG] [Wed Aug 24 19:33:30 2005] Checksum matches for 'HTML-Content-Extractor-0.01.tar.gz' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/Changes' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/ContentExtractorDriver.pl' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/MANIFEST' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/Makefile.PL' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/README' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/Content/' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/Content/ContentExtractor.pm' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/Content/HTMLTokenizer.pm' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/Content/TokeParserTokenizer.pm' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/WordTagRatio/' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/WordTagRatio/ExponentialRatio.pm' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/WordTagRatio/NormalizedRatio.pm' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/WordTagRatio/Ratio.pm' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/WordTagRatio/RelativeRatio.pm' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/WordTagRatio/SmoothedRatio.pm' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/lib/HTML/WordTagRatio/WeightedRatio.pm' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/t/' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/t/HTML-Content-Extractor-0.01.t' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/test.comp' [CP_MSG] [Wed Aug 24 19:33:34 2005] Extracted 'HTML-Content-Extractor-0.01/test.htm' [CP_MSG] [Wed Aug 24 19:33:35 2005] Extracted 'HTML::Content::Extractor' to '/net/sunu991/disc1/home/.cpanplus/5.8.5/build/HTML-Content-Extractor-0.01' [CP_MSG] [Wed Aug 24 19:33:52 2005] Checking if your kit is complete... Warning: the following files are missing in your kit: lib/HTML-Content-Extractor-0.01.pm Please inform the author. Warning: prerequisite HTML::TagSet 0 not found. ################################################################# You are running Makefile.PL. When this finishes, remember that you will also need to run the following to finish the install of HTML-Content-Extractor: make make test make install if "make install" fails and indicates that you don't have proper permissions to install, you do have the option to install HTML-Content-Extractor in a local directory of your own choosing. You can do this as follows: perl Makefile.PL PREFIX=/MYDIR make make test make install where /MYDIR is a directory that you own and can write to. After all this is done, you can run "make clean" to remove some of the files created during installation ################################################################# Writing Makefile for HTML::Content::ContentExtractor [CP_ERROR] [Wed Aug 24 19:33:52 2005] No such module 'HTML::TagSet' found on CPAN [CP_ERROR] [Wed Aug 24 19:35:17 2005] MAKE failed: No such file or directory cp lib/HTML/Content/ContentExtractor.pm blib/lib/HTML/Content/ContentExtractor.pm cp lib/HTML/WordTagRatio/NormalizedRatio.pm blib/lib/HTML/WordTagRatio/NormalizedRatio.pm cp lib/HTML/Content/HTMLTokenizer.pm blib/lib/HTML/Content/HTMLTokenizer.pm cp lib/HTML/WordTagRatio/WeightedRatio.pm blib/lib/HTML/WordTagRatio/WeightedRatio.pm cp lib/HTML/WordTagRatio/ExponentialRatio.pm blib/lib/HTML/WordTagRatio/ExponentialRatio.pm cp lib/HTML/Content/TokeParserTokenizer.pm blib/lib/HTML/Content/TokeParserTokenizer.pm cp lib/HTML/WordTagRatio/Ratio.pm blib/lib/HTML/WordTagRatio/Ratio.pm cp lib/HTML/WordTagRatio/SmoothedRatio.pm blib/lib/HTML/WordTagRatio/SmoothedRatio.pm cp lib/HTML/WordTagRatio/RelativeRatio.pm blib/lib/HTML/WordTagRatio/RelativeRatio.pm cp ContentExtractorDriver.pl blib/script/ContentExtractorDriver.pl /usr/local/perl-5.8.5/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/ContentExtractorDriver.pl Manifying blib/man1/ContentExtractorDriver.pl.1 Can't open blib/man3/HTML/Content/ContentExtractor.3 for writing: No such file or directory at /usr/local/perl-5.8.5/lib/5.8.5/ExtUtils/Command/MM.pm line 132 Manifying blib/man3/HTML/Content/ContentExtractor.3 make: *** [manifypods] Error 255 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: HTML::TokeParser 2.30 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: This report was machine-generated by CPAN::YACSmoke 0.03. -- Summary of my perl5 (revision 5 version 8 subversion 5) configuration: Platform: osname=solaris, osvers=2.9, archname=sun4-solaris-thread-multi uname='sunos sunu991 5.9 generic_112233-12 sun4u sparc sunw,ultra-5_10 solaris ' config_args='-de -Dusethreads -Dcc=gcc' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64', optimize='-O', cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -I/usr/local/include' ccversion='', gccversion='3.3.2', gccosandvers='solaris2.8' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib ' libpth=/usr/local/lib /usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lpthread -lc perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
