This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to [email protected] to keep other
test volunteers informed and to prevent any duplicate effort.
        
--

Dear GWOLF,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.055. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu Sep 15 16:34:44 2005] Trying to get 
'http://www.cpan.org/authors/id/G/GW/GWOLF/User-Simple-1.1.tar.gz'
[MSG] [Thu Sep 15 16:34:46 2005] Trying to get 
'http://www.cpan.org/authors/id/G/GW/GWOLF/CHECKSUMS'
[MSG] [Thu Sep 15 16:34:47 2005] Checksum matches for 'User-Simple-1.1.tar.gz'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/lib/'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/lib/User/'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/lib/User/Simple/'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 
'User-Simple-1.1/lib/User/Simple/Admin.pm'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/lib/User/Simple.pm'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/META.yml'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/Changes'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/examples/'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 
'User-Simple-1.1/examples/user-simple-admin'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/MANIFEST'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/t/'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/t/User-Simple.t'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/Makefile.PL'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User-Simple-1.1/README'
[MSG] [Thu Sep 15 16:34:47 2005] Extracted 'User::Simple' to 
'/opt/perl/testers/.cpanplus/5.8.7/build/User-Simple-1.1'
[MSG] [Thu Sep 15 16:34:49 2005] Checking if your kit is complete...
Looks good
Writing Makefile for User::Simple

[MSG] [Thu Sep 15 16:34:49 2005] Module 'User::Simple' requires 'Date::Calc' 
version '0' to be installed 
[MSG] [Thu Sep 15 16:34:51 2005] cp lib/User/Simple/Admin.pm 
blib/lib/User/Simple/Admin.pm
cp lib/User/Simple.pm blib/lib/User/Simple.pm
Manifying blib/man3/User::Simple::Admin.3
Manifying blib/man3/User::Simple.3

[ERROR] [Thu Sep 15 16:34:52 2005] MAKE TEST failed: [EMAIL PROTECTED] 
t/User-Simple....# Looks like you planned 41 tests but only ran 16.
dubious
        Test returned status 25 (wstat 6400, 0x1900)
DIED. FAILED tests 17-41
        Failed 25/41 tests, 39.02% okay (less 14 skipped tests: 2 okay, 4.88%)
Failed Test     Stat Wstat Total Fail  Failed  List of Failed
-------------------------------------------------------------------------------
t/User-Simple.t   25  6400    41   50 121.95%  17-41
14 subtests skipped.
Failed 1/1 test scripts, 0.00% okay. 25/41 subtests failed, 39.02% okay.
make: *** [test_dynamic] Error 25


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
        DBI                                1.48
        Date::Calc                            0
        Digest::MD5                        2.33

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 7) configuration:
  Platform:
    osname=linux, osvers=2.4.30, archname=i686-linux-thread-multi-64int-ld
    uname='linux rinse 2.4.30 #2 tue may 24 01:59:23 cst 2005 i686 unknown '
    config_args='-s -d -Dusethreads -Dcc=gcc -Doptimize=-g -O3 -Duse64bitint 
-Duselongdouble -Dprefix=/usr -Dd_dosuid -Dotherlibdirs=/usr/share/perl5 
-Dinc_version_list=none -Duseshrplib=false [EMAIL PROTECTED] 
-Dsiteman1=/usr/share/man/man1 -Dsiteman1=/usr/share/man/man3'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define 
usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS 
-DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE 
-D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING 
-fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='3.4.4', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, 
Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.5.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.5'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

Reply via email to