This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Scott Beck, This is a computer-generated error report created automatically by CPANPLUS, version 0.0562. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'fetch': [CP_MSG] [Thu Dec 29 09:21:39 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/id/S/SA/SABECK/Mail-ClamAV-0.17.tar.gz' [CP_MSG] [Thu Dec 29 09:21:39 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/id/S/SA/SABECK/CHECKSUMS' [CP_MSG] [Thu Dec 29 09:21:39 2005] Checksum matches for 'Mail-ClamAV-0.17.tar.gz' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/Inline/' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/Inline/MakeMaker.pm' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/Makefile.PL' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/README' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/t/' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/t/Mail-ClamAV.t' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/t/eicarcom2.zip' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/t/virus.eml' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/config.pl' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/MANIFEST' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/INSTALL' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/ClamAV.pm' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/META.yml' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail-ClamAV-0.17/Changes' [CP_MSG] [Thu Dec 29 09:21:40 2005] Extracted 'Mail::ClamAV' to '/root/.cpanplus/5.8.6/build/Mail-ClamAV-0.17' [CP_MSG] [Thu Dec 29 09:21:40 2005] Checking if your kit is complete... Looks good Writing Makefile for Mail::ClamAV [CP_ERROR] [Thu Dec 29 09:21:47 2005] MAKE failed: No such file or directory cp ClamAV.pm blib/lib/Mail/ClamAV.pm /usr/bin/perl -Mblib -MInline=NOISY,_INSTALL_ -MMail::ClamAV -e1 0.17 blib/arch Starting Build Prepocess Stage Finished Build Prepocess Stage Starting Build Parse Stage Finished Build Parse Stage Starting Build Glue 1 Stage Finished Build Glue 1 Stage Starting Build Glue 2 Stage Finished Build Glue 2 Stage Starting Build Glue 3 Stage Finished Build Glue 3 Stage Starting Build Compile Stage Starting "perl Makefile.PL" Stage Writing Makefile for Mail::ClamAV make[1]: Entering directory `/root/.cpanplus/5.8.6/build/Mail-ClamAV-0.17/_Inline/build/Mail/ClamAV' Finished "perl Makefile.PL" Stage Starting "make" Stage /usr/bin/perl /usr/lib/perl5/5.8.6/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.8.6/ExtUtils/typemap ClamAV.xs > ClamAV.xsc && mv ClamAV.xsc ClamAV.c gcc -c -I/root/.cpanplus/5.8.6/build/Mail-ClamAV-0.17 -I/usr/local/include -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables -DVERSION=\"0.17\" -DXS_VERSION=\"0.17\" -fPIC "-I/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE" ClamAV.c ClamAV.xs: In function âclamav_perl_newâ: ClamAV.xs:52: warning: pointer targets in passing argument 3 of âcl_loaddbdirâ differ in signedness ClamAV.xs:55: warning: pointer targets in passing argument 3 of âcl_loaddbâ differ in signedness ClamAV.xs: In function âclamav_perl__scanbuffâ: ClamAV.xs:185: warning: passing argument 3 of âPerl_sv_setpvâ makes pointer from integer without a cast ClamAV.xs: In function âclamav_perl__scanfdâ: ClamAV.xs:229: warning: passing argument 3 of âPerl_sv_setpvâ makes pointer from integer without a cast ClamAV.xs: In function âclamav_perl__scanfileâ: ClamAV.xs:270: warning: passing argument 3 of âPerl_sv_setpvâ makes pointer from integer without a cast ClamAV.xs: In function âerrorâ: ClamAV.xs:293: warning: assignment makes pointer from integer without a cast ClamAV.xs: In function âclamav_perl_constantâ: ClamAV.xs:334: error: âCL_SCAN_DISABLERARâ undeclared (first use in this function) ClamAV.xs:334: error: (Each undeclared identifier is reported only once ClamAV.xs:334: error: for each function it appears in.) make[1]: *** [ClamAV.o] Error 1 make[1]: Leaving directory `/root/.cpanplus/5.8.6/build/Mail-ClamAV-0.17/_Inline/build/Mail/ClamAV' A problem was encountered while attempting to compile and install your Inline C code. The command that failed was: make The build directory was: /root/.cpanplus/5.8.6/build/Mail-ClamAV-0.17/_Inline/build/Mail/ClamAV To debug the problem, cd to the build directory, and inspect the output files. at /root/.cpanplus/5.8.6/build/Mail-ClamAV-0.17/blib/lib/Mail/ClamAV.pm line 193 BEGIN failed--compilation aborted at /root/.cpanplus/5.8.6/build/Mail-ClamAV-0.17/blib/lib/Mail/ClamAV.pm line 537. Compilation failed in require. BEGIN failed--compilation aborted. make: *** [ClamAV.inl] Error 2 PREREQUISITES: Here is a list of prerequisites you specified and versions we managed to load: Inline 0.44 ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 6) configuration: Platform: osname=linux, osvers=2.6.9-22.18.bz155725.elsmp, archname=i386-linux-thread-multi uname='linux hs20-bc1-5.build.redhat.com 2.6.9-22.18.bz155725.elsmp #1 smp thu nov 17 15:34:08 est 2005 i686 i686 i386 gnulinux ' config_args='-des -Doptimize=-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables -Dversion=5.8.6 -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_endprotoent_r_proto -Ud_endservent_r_proto -Ud_sethostent_r_proto -Ud_setprotoent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.5 5.8.4 5.8.3' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables', cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='4.0.2 20051125 (Red Hat 4.0.2-8)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.5.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.5' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'
