This distribution has been tested as part of the cpan-testers effort to test as many new uploads to CPAN as possible. See http://testers.cpan.org/
Please cc any replies to [email protected] to keep other test volunteers informed and to prevent any duplicate effort. -- Dear Audrey Tang, This is a computer-generated error report created automatically by CPANPLUS, version 0.0562. Testers personal comments may appear at the end of this report. Thank you for uploading your work to CPAN. However, it appears that there were some problems testing your distribution. TEST RESULTS: Below is the error stack from stage 'fetch': [CP_ERROR] [Tue Jan 24 10:42:56 2006] No such key 'prerequisites_policy' in field 'conf' [CP_MSG] [Tue Jan 24 10:42:56 2006] Checking if source files are up to date [CP_MSG] [Tue Jan 24 10:42:56 2006] Retrieving /root/.cpanplus/sourcefiles.2.13.stored [CP_ERROR] [Tue Jan 24 10:42:57 2006] MAKE failed: make: the `-j' option requires a positive integral argument Usage: make [options] [target] ... Options: -b, -m Ignored for compatibility. -B, --always-make Unconditionally make all targets. -C DIRECTORY, --directory=DIRECTORY Change to DIRECTORY before doing anything. -d Print lots of debugging information. --debug[=FLAGS] Print various types of debugging information. -e, --environment-overrides Environment variables override makefiles. -f FILE, --file=FILE, --makefile=FILE Read FILE as a makefile. -h, --help Print this message and exit. -i, --ignore-errors Ignore errors from commands. -I DIRECTORY, --include-dir=DIRECTORY Search DIRECTORY for included makefiles. -j [N], --jobs[=N] Allow N jobs at once; infinite jobs with no arg. -k, --keep-going Keep going when some targets can't be made. -l [N], --load-average[=N], --max-load[=N] Don't start multiple jobs unless load is below N. -n, --just-print, --dry-run, --recon Don't actually run any commands; just print them. -o FILE, --old-file=FILE, --assume-old=FILE Consider FILE to be very old and don't remake it. -p, --print-data-base Print make's internal database. -q, --question Run no commands; exit status says if up to date. -r, --no-builtin-rules Disable the built-in implicit rules. -R, --no-builtin-variables Disable the built-in variable settings. -s, --silent, --quiet Don't echo commands. -S, --no-keep-going, --stop Turns off -k. -t, --touch Touch targets instead of remaking them. -v, --version Print the version number of make and exit. -w, --print-directory Print the current directory. --no-print-directory Turn off -w, even if it was turned on implicitly. -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE Consider FILE to be infinitely new. --warn-undefined-variables Warn when an undefined variable is referenced. This program built for x86_64-redhat-linux-gnu Report bugs to <[email protected]> ******************************** NOTE ******************************** The comments above are created mechanically, possibly without manual checking by the sender. As there are many people performing automatic tests on each upload to CPAN, it is likely that you will receive identical messages about the same problem. If you believe that the message is mistaken, please reply to the first one with correction and/or additional informations, and do not take it personally. We appreciate your patience. :) ********************************************************************** Additional comments: -- Summary of my perl5 (revision 5 version 8 subversion 5) configuration: Platform: osname=linux, osvers=2.6.9-22.18.bz155725.elsmp, archname=x86_64-linux-thread-multi uname='linux hs20-bc1-7.build.redhat.com 2.6.9-22.18.bz155725.elsmp #1 smp thu nov 17 15:34:08 est 2005 x86_64 x86_64 x86_64 gnulinux ' config_args='-des -Doptimize=-O2 -g -pipe -m64 -Dversion=5.8.5 -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Dlibpth=/usr/local/lib64 /lib64 /usr/lib64 -Dprivlib=/usr/lib/perl5/5.8.5 -Dsitelib=/usr/lib/perl5/site_perl/5.8.5 -Dvendorlib=/usr/lib/perl5/vendor_perl/5.8.5 -Darchlib=/usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi -Dsitearch=/usr/lib64/perl5/site_perl/5.8.5/x86_64-linux-thread-multi -Dvendorarch=/usr/lib64/perl5/vendor_perl/5.8.5/x86_64-linux-thread-multi -Darchname=x86_64-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dinc_version_list=5.8.4 5.8.3 5.8.2 5.8.1 5.8.0' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=define use64bitall=define uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -g -pipe -m64', cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='3.4.5 20051201 (Red Hat 3.4.5-1)', gccosandvers='' intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='gcc', ldflags ='' libpth=/usr/local/lib64 /lib64 /usr/lib64 libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.3.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.4' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib64/perl5/5.8.5/x86_64-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared'
